网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem. If fcs1 has failed， what is the correct procedure to rectify this problem？ （）
A
Using ’diagmenu’ command， set fcs1 to Defined.
B
Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.
C
Using ’diagmenu’ command， set the fcs1 state to Defined
D
Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined
参考答案
参考解析
解析：
暂无解析
更多 “单选题A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem. If fcs1 has failed， what is the correct procedure to rectify this problem？ （）A Using ’diagmenu’ command， set fcs1 to Defined.B Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.C Using ’diagmenu’ command， set the fcs1 state to DefinedD Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined” 相关考题
考题
A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation.What multipathing driver is required to build a redundant solution?（）A.RDACB.MPIOC.SSPCD.SDDPCM
考题
A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A、 OSPFB、 RIPC、 FSPFD、 VSANs
考题
A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）A、OSPFB、RIPC、FSPFD、VSANs
考题
A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following： ？ 2 integrated network ports ？ 2 fibre channel adapter cards ？ 1 power supply and redundant cooling ？ HACMP v5.1 In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）A、One fibre channel switchB、Two fibre channel switchesC、Two Ethernet cardsD、Nothing
考题
Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.
考题
An administrator has decided to use a Shared Ethernet Adapter （SEA） as part of a virtualized environment. Due to the expected traffic across the SEA， the administrator has decided to use an aggregation of two physical Ethernet adapters， ent0 and ent1 as the backing device in the VIO server to increase the available network bandwidth. Which of the following commands would successfully create an aggregation device within a VIO server？ （）A、 mkvdev -lnagg ent0，ent1B、 mkdev -lnagg -d ent0，ent1C、 mkvdev -t etherchannel -a ent0，ent1D、 mkdev -c adapter -s pseudo -t etherchannel ent0，ent1
考题
A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem. If fcs1 has failed， what is the correct procedure to rectify this problem？ （）A、 Using ’diagmenu’ command， set fcs1 to Defined.B、 Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.C、 Using ’diagmenu’ command， set the fcs1 state to DefinedD、 Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined
考题
A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation. What multipathing driver is required to build a redundant solution?（）A、RDACB、MPIOC、SSPCD、SDDPCM
考题
A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory， four 10/100/1000 TX LAN adapters， and six fibre channel adapters to external storage in an IBM ESS （Shark）. They like the idea of being able to do SAN maintenance while not incurring downtime. If all LPARs are production related and similar， which question is most appropriate for the pSeries technical specialist to ask？（）A、Would 10/100 Ethernets work as well？B、Should there be eight fibre channel adapters？C、Should there be an async adapter for heartbeat？D、Will all LPARs need access to a common fibre channel tape drive？
考题
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）A、LPAR-A with 1Gb FC HBA and SAN connectionB、LPAR-B with 2Gb FC HBA and SAN connectionC、LPAR-C with 4Gb FC HBA and SAN connectionD、LPAR-D with 8Gb FC HBA and SAN connection
考题
Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）A、Have one VIO server with striped disks for all LPARsB、Have one VIO server with mirrored disks for all LPARsC、Have two VIO servers with each LPAR accessing both VIO serversD、Have two VIO servers with each LPAR accessing a different VIO server
考题
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）A、Dual power supplies.B、Twice the amount of disk.C、Two dual-port LHEA adapters.D、Two dual-port fibre channel adapters.
考题
A customer is ready to order a pSeries solution. However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option. What is the most appropriate action for the specialist to take next？（）A、Ask the customer to confirm which option is best for their environment.B、Order the fibre channel option and purchase a converter later if necessary.C、Order both SCSI and fibre channel adapters to cover both potential options.D、Inform the customer that fibre channel was selected for performance reasons.
考题
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A、Configure 2CFFh combination fibre channel / gigabit Ethernet adaptersB、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapterC、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapterD、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
考题
A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）A、Implement PowerHA SystemMirror on both VIO servers.B、Configure Etherchannel between the client LPARs and the two VIO servers.C、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
考题
A cluster administrator has been asked to install HACMP on two nodes with the following hardware： -two CPUs， - 1GB RAM， - one 1 36GB drive， -two 10/100/1000 Ethernet adapters， and -GB Fibre Channel adapters dual attached to SAN storage. In order to eliminate single points of failure，the administrator should first add which of the following：（） A、 an additional 1GB RAM to each node.B、 Another bootable mirrored disk drive.C、 A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.D、 Nothing，because this is a viable cluster solution with no single points of failure.
考题
Company.com recently experienced an unanticipated system outage when the VIO server was upgraded. The current p5-570 has six Micro-Partitions and a VIO server partition. How can a similar outage be avoided in the future？（）A、Use DLPAR to avoid an outage.B、Deploy a redundant VIO server in the POWER5 system.C、Add additional Host Bus Adapters and Network adapters to the VIO server.D、Implement a standby server and move all partitions to it before applying future updates.
考题
A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives （2）two physical Microsoft Active Directory Servers （3）twenty-two physical Citrix servers （4）three physical Web servers （5）one physical vCenter server （6）eight vSphere hosts Which configuration minimally satisfies these requirements？（）A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modulesB、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modulesC、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modulesD、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules
考题
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adaptersB、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapterC、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapterD、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
考题
单选题A cluster administrator has been asked to install HACMP on two nodes with the following hardware： -two CPUs， - 1GB RAM， - one 1 36GB drive， -two 10/100/1000 Ethernet adapters， and -GB Fibre Channel adapters dual attached to SAN storage. In order to eliminate single points of failure，the administrator should first add which of the following：（）A
an additional 1GB RAM to each node.B
Another bootable mirrored disk drive.C
A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.D
Nothing，because this is a viable cluster solution with no single points of failure.
考题
单选题A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A
OSPFB
RIPC
FSPFD
VSANs
考题
单选题Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）A
The FCoE card provides both LAN and fibre channel function from a single card on the blade. B
The FCoE advanced technology removes the need for any BladeCenter switching to support this function.C
Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.D
The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.
考题
单选题A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following： ？ 2 integrated network ports ？ 2 fibre channel adapter cards ？ 1 power supply and redundant cooling ？ HACMP v5.1 In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）A
One fibre channel switchB
Two fibre channel switchesC
Two Ethernet cardsD
Nothing
考题
单选题A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）A
ImplementPowerHA SystemMirror on both VIO servers.B
ConfigureEtherchannel between the client LPARs and the two VIO serversC
Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.D
Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
考题
单选题Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?（）A
Create LVM mirrors between LUNsB
MPIO is necessary as the device driverC
Use separate fibre adapters in the Virtual IO Server for each LUND
Virtual IO Server is a disk subsystem and must control the LUNs behind it
考题
单选题A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability？（）A
Dual power supplies.B
Twice the amount of disk.C
Two dual-port LHEA adapters.D
Two dual-port fibre channel adapters.
热门标签
最新试卷
