网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
A
Install a larger fan near the hard drive to cool the system.
B
Clean the drive with compressed air and continue to use it.
C
Remove and replace the drive.
D
Apply more thermal compound and reseat the drive.
参考答案
参考解析
解析：
暂无解析
更多 “单选题After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A Install a larger fan near the hard drive to cool the system.B Clean the drive with compressed air and continue to use it.C Remove and replace the drive.D Apply more thermal compound and reseat the drive.” 相关考题
考题
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager
考题
After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?()
A. IRQ ManagerB. BIOSC. Device ManagerD. Hardware Compatibility List
考题
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A、Use a jumper from the motherboard where the new drive is going to be installed.B、Use a jumper from a hard drive that is no longer functioning.C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D、The new hard drive must be replaced
考题
Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）A、Format the partitionB、Load any RAID or SATA drivers neededC、Partition the driveD、Configure Windows settings
考题
The network technician is troubleshooting a network issue by implementing a new security device.After installing and configuring the device, which of the following steps should the technician takeNEXT?（）A、Verity full system functionalityB、Identify the main problem and question the userC、Document their findings, actions, and outcomesD、Escalate the issue to upper management
考题
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A、 backup the BIOS configuration to use laterB、 install the BIOS update from a command promptC、 create a bootable floppy and copy the BIOS update tools to the floppyD、 read the manufacturer’s guidelines and recommendations on installing the update
考题
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS
考题
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A、Install a larger fan near the hard drive to cool the system.B、Clean the drive with compressed air and continue to use it.C、Remove and replace the drive.D、Apply more thermal compound and reseat the drive.
考题
A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）A、Add another hard drive and use that available space.B、Run FDISK.C、Use the Disk Management tool.D、Back up all important data to an external drive then reformat the hard drive.
考题
A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).A、Boot into Safe ModeB、Replace the motherboardC、Uninstall the applicationD、Replace the hard driveE、Install more RAM
考题
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
考题
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A、The new drive’s jumper is set for master.B、The new drive is connected to the secondary bus as a slave drive.C、Both drives’ jumpers are set for cable select.D、The old drive’s jumper is set for master and the new drive is set for slave.
考题
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
考题
An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）A、The system has a fragmented hard drive.B、The drive interface needs to be changed.C、The user has too many documents on the hard drive.D、The system page file has an issue.
考题
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
考题
After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?（）A、IRQ ManagerB、BIOSC、Device ManagerD、Hardware Compatibility List
考题
A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）A、Windows cannot be booted from a controller card.B、The hard drive must have Windows reinstalled because a new controller card was installed.C、The SATA controller card was not set as a boot device in the computer BIOS.D、The new controller must have the correct jumper settings for Windows mode.
考题
多选题A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).ABoot into Safe ModeBReplace the motherboardCUninstall the applicationDReplace the hard driveEInstall more RAM
考题
单选题Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A
The new drive’s jumper is set for master.B
The new drive is connected to the secondary bus as a slave drive.C
Both drives’ jumpers are set for cable select.D
The old drive’s jumper is set for master and the new drive is set for slave.
考题
单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A
The BIOS is set with the wrong boot order.B
The jumpers have not been set on the hard drive.C
The hard drive is not compatible with the system board.D
The boot.ini file needs to be modified.
考题
单选题An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）A
The system has a fragmented hard drive.B
The drive interface needs to be changed.C
The user has too many documents on the hard drive.D
The system page file has an issue.
考题
单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）A
Replace the second drive with a hot swappable one.B
Swap the drive boot order in the BIOSC
Make the second disk active under the disk management tool.D
Rebuild the array using the hardware RAID tool at boot.
考题
单选题The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）A
Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.B
Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.C
Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.D
Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.
考题
单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A
Use a jumper from the motherboard where the new drive is going to be installed.B
Use a jumper from a hard drive that is no longer functioning.C
Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D
The new hard drive must be replaced
考题
单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A
backup the BIOS configuration to use laterB
install the BIOS update from a command promptC
create a bootable floppy and copy the BIOS update tools to the floppyD
read the manufacturer’s guidelines and recommendations on installing the update
考题
单选题An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）A
reboot the computer because Windows automatically generates a new page file.B
add a new hard drive， format the drive and install Windows.C
back up all data， reboot the computer and notify a desktop technician.D
reformat the hard drive and reinstall Windows.
考题
单选题After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）A
Run CHKDSKB
Boot to ERDC
Run MSCONFIGD
Go into Safe Mode
考题
单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）A
Have the client purchase a SATA compatible system board.B
Have the client purchase a SATA to IDE conversion kit.C
Have the client return the drive and purchase an IDE compatible drive.D
Have the client purchase a SCSI to SATA conversion kit.
热门标签
最新试卷
