You are the network administrator for . You administer a Windows Server 2003 computer named TestKing7. Users report that they experience poor performance when they access resources located on TestKing7. You suspect a disk bottleneck. You need to set up performance counters to monitor TestKing7.You need to decide which performance objects to monitor.Which two counters should you choose? （）(Each correct answer presents part of the solution. Select two.)A.LogicalDisk\%IdleTimeB.PhysicalDisk\%DiskTimeC.PhysicalDisk\Avg.DiskQueueLengthD.Memory\WriteCopies/secE.Memory\CommitLimit

考题 You are the administrator of your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A．Add a computer running DHCP Relay Agent to the marketing segment.B．Add a computer running the network monitor driver to the marketing segment.C．Move the Windows 2000 Server computer running WINS to the marketing segment.D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.

查看答案

考题 You are an administrator of Ezonexam.com's network. You want to perform. routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.You want to upgrade all of the critical system files and patches on the server in the shortest possible time.What should you do?A．Use Windows Update.B．Run System File Checker.C．Log on as administrator and run Windows Update.D．Log on as administrator and run System File Checker.

查看答案

考题 You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.

查看答案

考题 You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.

查看答案

考题 You are the network administrator for Active Directory.Another system administrator installs Software Update Services (SUS) on a production Windows Server 2003 computer. You are assigned to manage the SUS computer. You need to ensure that you can recover SUS if the server fails.You need to back up all components that are required to restore SUS to its current configuration. Because of limited space, you must not back up unnecessary data.What action or actions should you perform? Select all that apply.（）A. Back up the SUS folder that contains synchronized content.B. Back up the folder in which the SYSAdmin site was created.C. Back up the System State data fro the Windows Server 2003 computer.D. Back up the IIS metabase

查看答案

考题 You are the network administrator for . All network servers run Windows server 20003, and all client computers run Windows XP Professional.A user named King manages an application server named Server25. One morning,King tries to log on to the network from Server 25. He receives the message shown in the Logon message exhibit.King notifies you of the problem. You open Active Directory Users and Computers and see the display shown in the Active Directory exhibit.You need to enable King to log on to Server 25. Your solution must require the minimum amount of administrative effort.What should you do?（）A. Enable the computer account for Server 25B. Reset the computer account for Server 25.C. Remove Server 25 from the domain, and then rejoin Server25 to the domain.D. Delete the computer account for Server25, and then create a new account with the same name.

查看答案

考题 You are the network administrator for Active Directory. Another system administrator installs Software Update Services (SUS) on a production Windows Server 2003 computer. You are assigned to manage the SUS computer. You need to ensure that you can recover SUS if the server fails. You need to back up all components that are required to restore SUS to its current configuration. Because of limited space, you must not back up unnecessary data. What action or actions should you perform? Select all that apply.（）A、Back up the SUS folder that contains synchronized content.B、Back up the folder in which the SYSAdmin site was created.C、Back up the System State data fro the Windows Server 2003 computer.D、Back up the IIS metabase

查看答案

考题 You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）A、Ask a domain administrator to authorize the RIS server. B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.C、Install RIS on the domain controller. Copy the RIS image to the domain controller.D、Add a reservation for the RIS server to the DHCP server.

查看答案

考题 You are a network administrator for your company. The network consists of a single Active Directory domain. The domain contains three Windows Server 2003 domain controllers， 20 Windows Server 2003 member servers， and 750 Windows XP Professional computers. The domain is configured to use only Kerberos authentication for all server connections.A user reports that she receives an "Access denied" error message when she attempts to connect to one of the member servers. You want to test the functionality of Kerberos authentication on the user’s client computer. Which command should you run from the command prompt on the user’s computer？（）A、netshB、netdiagC、ktpassD、ksetup

查看答案

考题 You are the network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. All client computers run Windows XP Professional.You install and configure a single server to run Windows Server Update Services （WSUS）. You configure the appropriate Group Policy settings to specify separate WSUS target groups for client and server computers. You need to ensure that computers automatically assign themselves to the correct computer group. What should you do？（）A、In the WSUS console， configure Computer Options so that Use group policy or registry settings on computers is selected.B、In the WSUS console， configure Computer Options so that Use the Move Computers Task in Windows Server Update Services is selected.C、In the WSUS console， create the appropriate computer groups.D、Create organizational units （OUs） for each group.

查看答案

考题 You are the network administrator for your company. All client computers run Windows XP Professional. All servers run Windows Server 2003.The company has offices in Los Angeles， San Francisco， and Seattle. Each office is configured as a separate IP subnet. DNS is the only method of name resolution used on the network.You need to implement a software update infrastructure on the network. You install Windows Server Update Services （WSUS） on a computer named Server1 in the Los Angeles office. You install WSUS on Server1 with all default settings. You create a Group Policy object （GPO） named WSUS. You have no plans to install additional WSUS servers.You need to ensure that client computers can successfully connect to the WSUS server. What should you do？（）A、Configure the Internet browser home page on all client computers to point to http： //windowsupdate.microsoft.com.B、In the WSUS GPO， specify the Server Name property to be the server’s fully qualified domain name （FQDN）.C、On the WSUS server， configure the IIS Manager to require HTTP over SSL.D、Enable communication over port 443 between all client computers and the WSUS server.

查看答案

考题 You are the network administrator for TestKing.com. The network consists of a single Active Directory domain named testking.com. All network servers run Windows Server 2003. You place computer accounts for servers in OUs that are organized by server roles. You apply GPOs to these servers at the OU level. You need to add a new server to the domain. You need to ensure that the appropriate GPOs are applied to this server. What should you do?（）A、Prestage a domain computer account for the new server in the appropriate OU. Join the server to the domain by using the prestaged computer account.B、On the server, add the domain name for the Active Directory domain to the DNS suffix setting. Join the server to the domain.C、Assign a user account the Allow - Create permission for the appropriate OU. Join the new server to the domain by using the user account.D、Join the new server to the Active Directory domain. On the new server, run the gpupdate /force command.

查看答案

考题 You are the network administrator for your company. The network consists of a single Active Directory domain. The network contains an application server running Windows Server 2003. Users report intermittent slow performance when they access the application server throughout the day. You find out that the network interface on the application server is being heavily used during the periods of slow performance. You suspect that a single computer is causing the problem.You need to create a plan to identify the problem computer. What should you do？（）A、 Monitor the performance monitor counters on the application server by using System Monitor. B、 Monitor the network traffic on the application server by using Network Monitor.C、 Monitor network statistics on the application server by using Task Manager.D、 Run network diagnostics on the application server by using Network Diagnostics.

查看答案

考题 Your network consists of a single Active Directory domain. You have a DHCP server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You have a computer named Computer1 that runs Windows XP Professional Service Pack 3 (SP3). You need to administer the DHCP service on Server1 from Computer1. What should you do first?（）A、On Computer1， install adminpak.msi.B、On Computer1， at a command prompt run the Netsh command.C、On Server1， open the DHCP snap-in and select Export List.D、On Server1， open the DHCP snap-in and add Computer1 to the list of servers.

查看答案

考题 You are the network administrator for You administer a Windows Server 2003 computer named TestKing5. The hardware vendor for TestKing5 notifies you that a critical hotfix is available. This hotfix is required for all models of this computer that have a certain network interface card. You need to find out if the network interface card that requires the hotfix is installed in TestKing5. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)（）A、Open Network Connections, and then examine the properties of each connection that is listed.B、Open the Component Services snap-in, expand Computers, expand My Computer, and then examine the list.C、Run the netsh interface command, and then examine the list.D、Open Device Manager, expand Network adapters, and then examine the list.

查看答案

考题 You are a network administrator for your company.A Windows Server 2003 computer named Server1 is exhibiting connectivity problems. You monitor Server1 by using System Monitor and Network Monitor. While monitoring， you notice that Server1 has approximately 4 MB of available memory， and the average CPU utilization is running at 95 percent. When you investigate the Network Monitor capture， you notice that some network packets sent to Server1 during the capture have not been captured. You need to ensure that the impact of monitoring on Server1 is reduced and that all packets sent to the computer are captured. What should you do？（）A、From a command prompt， run the diskperf command.B、Run Network Monitor in dedicated capture mode.C、Configure a Network Monitor capture filter.D、Increase the buffer size in Network Monitor.

查看答案

考题 You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.

查看答案

考题 You are the network administrator for . You administer a Windows Server 2003 computer named TestKing7. Users report that they experience poor performance when they access resources located on TestKing7. You suspect a disk bottleneck. You need to set up performance counters to monitor TestKing7. You need to decide which performance objects to monitor. Which two counters should you choose? （）(Each correct answer presents part of the solution. Select two.)A、LogicalDisk/%IdleTimeB、PhysicalDisk/%DiskTimeC、PhysicalDisk/Avg.DiskQueueLengthD、Memory/WriteCopies/secE、Memory/CommitLimit

查看答案

考题多选题You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003. All client computers run Windows XP Professional. The company has offices in Berlin, Dortmund, and Frankfurt. Each office is configured as a separate IP subnet. DNS is the only method of name resolution on the network. You need to implement a software update infrastructure on the network. You install Software Update Services (SUS) on a computer named TestKing3 in the Berlin office. You install on TestKing3 with all default settings. You have no plans to install additional SUS servers. You configure all client computers appropriately. You must ensure that client computers can successfully connect to the SUS server. What should you do?（）AConfigure the Internet browser home page on all client computers to point to http://windowsupdate.microsoft.com.BIn the SUS Administrator, configure the Server Name property to be the server's fully qualified domain name (FQDN).COpen IIS Manager and enable HTTP over SSL.DEnable communication over port 135 between all client computers and the SUS server.

查看答案

考题多选题You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（　）AAn unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.BExisting user environments will be maintained on the Windows 2000 Professional computers.CThe network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.DThe RIS image and the upgraded applications will be enabled as they are added to the N.etwork.

查看答案

考题单选题You are the administrator of a Windows Server 2003 computer named Server1. The network contains another Windows Server 2003 computer named Server2 that has the DNS and WINS services installed. Two hundred Windows 2000 Professional computers regularly connect to Server1 to access file and print resourcesAdministrators report that network traffic has increased and that response times for requests for network resources on Server1 have increased. You need to identify whether Server1 is receiving requests for resources through NetBIOS broadcasts. What should you do？（）A Use Network Monitor to capture traffic between Server1 and all client computers.B Use Network Monitor to capture traffic between Server1 and Server2.C Monitor Event Viewer for Net Logon error or warning events.D Run the tracert command on Server1.

查看答案

考题单选题You are the network administrator for your company. You need to provide Internet name resolution services for the company. You set up a Windows Server 2003 computer running the DNS Server service to provide this network service. During testing， you notice the following intermittent problems： Name resolution queries sometimes take longer than one minute to resolve. Some valid name resolution queries receive the following error message in the Nslookup command-line tool： "Non-existent domain." You suspect that there is a problem with name resolution. You need to review the individual queries that the server handles. You want to configure monitoring on the DNS server to troubleshoot the problem. What should you do？（）A In the DNS server properties， on the Debug Logging tab， select the Log packets for debugging option.B In the DNS server properties， on the Event Logging tab， select the Errors and warnings option.C In System Monitor， monitor the Recursive Query Failure counter in the DNS object.D In the DNS server properties， on the Monitoring tab， select the monitoring options.

查看答案

考题单选题You need to design a method to automate the deployment of critical updates and security patches that are supplied by Microsoft as these updates and security patches are released. Your solution must meet technical requirements. What should you do？（）A Deploy a Windows Server 2003 computer running SUS in the test network. Deploy SUS servers in each child domain to download administrator-approved updates from the test network SUS serverB Deploy a Windows Server 2003 computer running SUS in the test network Use autoupdate policies in each child domain to download and deploy updates from the test network SUS serverC Install MBSA on a Windows Server 2003 computer in the network network. Deploy MBSA as a Windows Installer package to all computers in the child domains， and configure MBSA to scan for updates from the server in the test networkD Install IIS on a Windows Server 2003 computer in the test network. Create a Web site named Updates on this server. Configure an autoupdate policy in each child domain to download and deploy updates from the Updates Web site

查看答案

考题单选题You have a computer that runs Windows XP Professional. The computer is a member of an Active Directory domain. A server administrator installs and shares a new printer on a server that runs Windows Server 2003. You need to configure the computer to print to the new printer. What should you do?（）A From the computer, install a local printer.B From the computer, install a network printer. C From the Active Directory domain, add the computer account for the Windows XP Professional computer to the Print Operators group. D From the Windows Server 2003 server, add the computer account for the Windows XP Professional computer to the Print Operators group.

查看答案

考题单选题You are the network administrator for your company. The network consists of a single Active Directory domain.All servers run Windows Server 2003.You place computer accounts for servers in organizational units (OUs) that are organized by server roles. You apply Group Policy objects (GPOs) to these servers at the OU level.You need to add a new server to the domain. You need to ensure that the appropriate GPOs are applied to this server.What should you do? （）A Prestage a domain computer account for the new server in the appropriate OU. Join the server to the domain by using the prestaged computer account.B On the new server, add the domain name for the Active Directory domain to the DNS suffix setting. Join the server to the domain.C Assign a user account the Allow - Create permission for the appropriate OU. Join the new server to the domain by using the user account.D Join the new server to the Active Directory domain. On the new server, run the gpupdate /force command.

查看答案

考题单选题You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A Stop and restart the DNS Client service.B Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C Add an A （host） record for the computer to the DNS server’s zone file.D Configure your DHCP server to have a DNS server address of 10.1.1.5.

查看答案

考题单选题You are the network administrator for your company. All network servers run Windows Server 2003. All client computers run Windows XP Professional. A member server named Server1 is located at a branch office that does not permit the use of Remote Desktop Protocol. Another administrator uses the Backup utility to create a scheduled backup job on Server1. The backup job performs a normal backup of an application server. The application server is removed from the network. You need to use a client computer to remove the backup job from Server1. You cannot travel to the branch office. What should you do? （）A Use the RUNAS feature to run the at /delete command as the Server1/Administrator account.B Log on by using your Administrator account and run the ntbackup /D command.C Log on by using your Administrator account and run the schtasks /delete command.D Use the RUNAS feature to run the taskkill command as the Server1/Administrator account.

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：