问题 单选题A hosting company recently purchased an IBM p5-570 to use in their data center. The company intends to use the server to run several different client workloads. Which of the following features of the IBM p5 servers addresses the need for the isolation of workloads？（）A Workload ManagerB Support for AIX 5.3C Logical partitioningD 64-bit or 32-bit kernel support
问题 单选题ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）A Configure the IP address through the first client partition.B Configure the IP address through the ASMI menus.C Configure the POWER5 service processor for DHCP from the HMC DHCP server.D Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
问题 单选题A technical specialist has a requirement to implement a 4-way POWER5 server with a small Web server partition and a high performance database server partition. The Web server provides a client front-end to the database server. The most important concerns are speed of communication between the Web server and the database and I/O speed of the database. Which of the following virtualization features would be most appropriate？（）A Virtual SCSIB Virtual EthernetC Virtual I/O ServerD Micro-Partitioning
问题 单选题Company.com wants to build two Dynamic Logical Partitions （DLPAR） on a p5-520. They have a requirement for communication between the two DLPARs. Which feature of virtualization will satisfy this requirement？（）A VLANB Virtual EthernetC Virtual I/O Server SupportD Capped and Uncapped Partitions
问题 单选题A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet Adapter？（）A mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1B mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1C mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1D mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1
问题 单选题Company.com would like to have the processor resources on their system efficiently shared between logical partitions， but does not require management of memory or I/O resources. Which of the following would accomplish this requirement？（）A HMC command lineB Uncapped processorsC Partition Load ManagerD Enterprise Workload Manager
问题 单选题When doing capacity planning for the Virtual I/O Server，what is the most important consideration？（）A The I/O workload needs of the client LPARsB The processing requirements of the client LPARsC The memory requirements of the client LPARsD The virtual Ethernet requirements between client LPARs
问题 单选题Which of the following allows the user to have two separate Ethernet networks share the same network adapter？（）A VLAN tagsB EtherChannelC Virtual EthernetD Shared Ethernet Adapter
问题 单选题Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）A Create all the partitions as AIX 5.2， each having two dedicated processors.B Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.C Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.D Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
问题 单选题Company.com wants to put two Micro-Partitions on a p5-570 and attach to a SAN. What is the best LPAR configuration to maximize SAN availability using four Host Bus Adapters （HBAs）？（）A Two HBAs assigned to each redundant VIOS which provides VSCSI access to LUNsB Two HBAs assigned to each LPAR with each LPAR owning HBAs on the same PCI bussesC Two HBAs assigned to each LPAR with each LPAR owning HBAs on separate PCI bussesD One HBA assigned to each LPAR and two HBAs assigned to a VIOS providing VSCSI access to LUNs
问题 单选题What is the minimum recommended amount of memory that can be assigned to a new VIO server？（）A 128MBB 256MBC 512MBD 1GB
问题 单选题Company.com has encountered a problem on the HMC， which requires access to the root shell on the HMC. Which of the following is necessary to access the root userid on the HMC？（）A Enable remote commands on the HMC Configuration menu,then use ssh to login to theHMC,enter su - rootB Login to the HMC as hscpe and run pesh,using a temporary password from IBM Support,afterward， enter su - rootC Login to the HMC as hscroot,then run pesh,using a temporary password from IBM Support, afterward,enter su - rootD Enable remote commands on the HMC Configuration menu，then telnet in as hscroot,entersu - root
问题 单选题The database on a p5-570 Micro-Partition has grown and backups are not meeting the Service Level Agreement. There are several partitions using the Virtual I/O Server to access the storage array. The database backup has high CPU utilization while the others have low CPU utilization. What adjustment can the technical specialist make to ensure that the Service Level Agreement is achieved？（）A Add memory to the database partition to improve response time.B Add additional Host Bus Adapters to the server to improve IO throughput.C Modify CPU allocations to favor the database partition.D Increase CPU allocations to the Virtual I/O Server.
问题 单选题Company.com has installed and configured a VIO server utilizing a Shared Ethernet Adapter and is investigating some network performance issues visible on the clients. The customer wants to understand the total network connectivity from the clients out to the data center routers. Which of the following commands will identify the Shared Ethernet Adapter mapping？（）A ifconfig -aB netstat -nrC lsmap -all -netD lsdev -Cc adapter
问题 单选题Company.com has a two-way p5-520 that will be running three shared processor Micro-Partitions consuming 60 percent of system resources. Immediately prior to shipment， the customer discovered they need to run a fourth server that requires AIX 5L V5.2. Which of the following will satisfy this requirement？（）A Change to a 4-way p5-550B Use Capacity on DemandC Configure a fourth logical partitionD Add memory to the configuration