网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
hostname Switch1 interface Vlan10 ip address 172.16.10.32 255.255.255.0 no ip redirects standby 1 ip 172.16.10.110 standby 1 timers 1 5 standby 1 priority 130 hostname Switch2 interface Vlan10 ip address 172.16.10.33 255.255.255.0 no ip redirects standby 1 ip 172.16.10.110 standby 1 timers 1 5 standby 1 priority 120 HSRP was implemented and configured on two switches while scheduled network maintenance was performed. After the two switches have finished rebooting， you notice via show commands that Switch2 is the HSRP active router. Which two items are most likely the cause of Switch1 not becoming the active router？ （）
- A、premption is disabled
- B、standby group number does not match VLAN number
- C、IP addressing is incorrect
- D、IP redirect is disabled
- E、incorrect standby timers
- F、booting delays
参考答案
更多 “ hostname Switch1 interface Vlan10 ip address 172.16.10.32 255.255.255.0 no ip redirects standby 1 ip 172.16.10.110 standby 1 timers 1 5 standby 1 priority 130 hostname Switch2 interface Vlan10 ip address 172.16.10.33 255.255.255.0 no ip redirects standby 1 ip 172.16.10.110 standby 1 timers 1 5 standby 1 priority 120 HSRP was implemented and configured on two switches while scheduled network maintenance was performed. After the two switches have finished rebooting， you notice via show commands that Switch2 is the HSRP active router. Which two items are most likely the cause of Switch1 not becoming the active router？ （）A、premption is disabledB、standby group number does not match VLAN numberC、IP addressing is incorrectD、IP redirect is disabledE、incorrect standby timersF、booting delays” 相关考题
考题
使Switch1的千兆端口允许所有VLAN通过的配置命令如下，请给出空白处的配置内容：Switch1(config)interface gigabit0/1 (进入端u配置模式)Switch1(config-if)switchport (6)Switch1(config-if)switchport (7) (设置封装协议为dotlq)
考题
将Switch1的端口1216划入v2的配置命令如下，请给出空白处的配置内容：Switch1(config)interface fastEthernet0/6 (进入端口6配置模式)Switch1(config-if)switchport (7)Switch1(config-if)switchport (8)
考题
阅读以下说明，回答问题1～4，将解答填入对应的解答栏内。利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网，可以对各个子网实施不同的管理策略。图4-1是在网络中划分VLAN的连接示意图。下面的命令是在交换机Switch1上创建一个名字为classroom的虚拟局域网(VLAN ID为2)的配置命令，请给出空白处的配置内容：Switch1 (1)Switch1(config) (2) (创建Vlan2)Switch1(config-vlan)name classroom (将Vlan2命名为classroom)Switch1(config-vlan) (3) (完成并退出)Switch1
考题
使Switch1的千兆端口允许所有VLAN通过的配置命令如下，请给出空白处的配置内容：Switchl(config)interface gigabit0/1(进入千兆端口配置模式)Switch1(config-if)switchport(4)Switch1(config-if)switchport(5)
考题
将Switcbl的端口6划入v2的配置命令如下，请给出空白处的配置内容：Switch1(config)interface fastEthemet0/6(进入端口6配置模式)Switch1(config-if)switchport(6)Switch1(config-if)switchport(7)
考题
阅读以下说明，回答问题1至问题3，将解答填入解答栏内。【说明】某公司租用了一段C类地址203.12.11.0/24～203.12.14.0/24，如下图所示。其网间地址是172.11.5.14/24。要求网内所有PC都能上网。接入层交换机Switch1的端口24为trunk口，其余各口属于vlan11，请解释下列命令并完成交换机的配置。Switch1config terminalSwitch1(config)interface f0/24(进入端口24配置模式)Switch1(config-if) switchport mode trunk(1)Switch1(config-if)switchport trunk encapsulation dotlq(2)Switch1(config-if) switchport trunk allowed all(允许所有VLAN从该端口交换数据)Switch1(config-if)exitSwitch1(config)exitSwkch1 vlan databaseSwitch1(vlan) vlan11 name lab01(3)Switch1(vlan)exitSwitch1 config terminalSwitch1(config)interface f0/9(进入f0/9的配置模式)Switch1(config-if)(4)(设置端口为接入链路模式)Switch1(config-if)(5)(把f0/9分配给VLAN11)Switch1(config-if)exitSwitch1(config)exit
考题
网络管理员在Cisco交换机Switch1上进行了如下配置:Switch1config terminalSwitch1(config)interface range f0／4 －10Switch1(config－if－range)switchport access vlan 2请问他执行以上操作的结果是( )。
A、在Switch1上添加VLAN2B、将Switch1上的f0/4-10接口添加到VLAN2中C、配置Switch1的f0/4-10接口为trunk模式D、查看Switch1的f0/4-10接口模式
考题
如果希望在Switch1中创建的VLAN信息也能在Switch2中使用，则分别在Switch1、Switch2上执行下列命令，请给出空白处的配置内容：Switch1vlan database (设置VLAN配置子模式)Switch1(vlan)vtp (4)Switch1(vlan)vtp domain abc (设置域名)Switch1(vlan)exit (退出VLAN配置模式)Switch2vlan database (设置VLAN配置子模式)Switch2(vlan)vtp (5)Switch2(vlan)vtp domain abc (设置域名)Switch2(vlan)exit (退出VLAN配置模式)
考题
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?（）A. Switch1(config)# i nterface fa0 /1 Switch1(config-if)# ip address 192.168.24.3.255.255.255.0B. Switch1 (config)#interface fa0/1 Switch1 (config-if)# switchport mode trunkC. Switch 1 (config)# i nterface fa0 /1 Switch1 (config-if)# duplex full Switch1 (config-if)# speed 100D. Switch1 (config-if)# default-gateway 192.168.24.1E. Switch1 (config)# line con 0 Switch1(config-line)# password cisco Switch1 (config-line)#login
考题
在CiscoIOS交换机上配置交换机名的命令是()。
A.set system name HOSTNAMEB.user HOSTNAME pass PASSWORDC.spanning-treeportfastD.hostname HOSTNAME
考题
由2台Cisco交换机构成的网络拓扑如下图所示，已知交换机端口的缺省优先级均为128。根据网络拓扑回答下列问题，将解答填入答题纸对应栏内。[问题1]（7分） 两个交换机连接的用户分为VLAN102～107共6组，为使Switch1和Switch2间的两条并行链路fe0/0和fe0/1上负载均衡，VLAN102、103和104的用户间通信时使用链路fe0/0，VLAN105、106和107的用户间通信时使用链路fe0/1。 下表为Switch1部分配置信息。根据要求，补全①到⑦处的命令或参数。 Switch1configure terminal Switch1(config) ① 创建vlan102 Switch1(config-vlan) ② 将该vlan命名为grp1 Switch1(config-vlan)exit 创建vlan103～107 Switch1(config)interface fastethernet0/2 Switch1(config-if) ③ 将fe0/2配置为access口 Switch1(config-if)switchport ④ 将fe0/2分配给vlan102 Switch1(config-if)exit 将fe0/3～fe0/7分配给vlan103～107 Switch1(config)interface fastethernet0/0 Switch1(config-if)switchport trunk ⑤ 配置封装方式为dot1q Switch1(config-if) ⑥ 将fe0/0配置为trunk口 Switch1(config-if)spanning-tree vlan 102-104 ⑦ 修改优先级为16，使VLAN102、103和104的用户间通信时使用fe0/0 Switch1(config-if)exit 配置fe0/1，使VLAN105～107的用户间通信时使用fe0/1 [问题2]（3分） 写出两种VLAN的划分方法。问题1中交换机的VLAN配置中采用的是哪种VLAN划分方法？ [问题3]（4分） 常用的VLAN交换机互连方式有哪三种？问题1中交换机的VLAN配置中，Switch1和Switch2互连方式是哪种？
考题
如图所示网络结构，当 Swith1 和 Swith2 都采用默认配置，那么 PC2 和 PC 4 之间不能通 信，如果要解决此问题，最快捷的解决方法是（）。
A. 把 Switch1 和 Switch2 连接端口配置为 trunk 模式
B. 把 Switch1 和 Switch2 连接端口配置为 access 模式
C. 把 Switch1 和 Switch2 设置配置为服务器模式
D. 把 Switch1 和 Switch2 设置配置为客户端模式
考题
如下图，生成树根网桥选举的结果是（ ）。
A. switch1将成为根网桥
B. switch2将成为根网桥
C. switch3将成为根网桥
D. switch1和switch2将成为根网桥
考题
改变设备名字为myrouter，应输入什么命令？（）A、ZXR10hostname myrouterB、ZXR10#hostname myrouterC、ZXR10（config）#hostname myrouterD、ZXR10（config）#name myrouter
考题
SQL server中（）语句能将temp表中的hostname字段扩充为varchar（100）。A、alter table temp alter column hostname varchar（1100）B、alter table temp column hostname varchar（100）C、alter table temp alter column of hostname varchar（100）D、alter table temp add column hostname varchar（100）
考题
The network security policy requires that only one host be permitted to attach dynamically to each switch interfacE.If that policy is violated, the interface should shut down. Which two commands must the network administrator configure on the 2950 Catalyst switch to meet this policy? （）A、Switch1(config-if)# switchport port-security maximum 1B、Switch1(config)# mac-address-table secureC、Switch1(config)# access-list 10 permit ip hostD、Switch1(config-if)# switchport port-security violation shutdownE、Switch1(config-if)# ip access-group 10
考题
Company.com has an application that has a hard-coded hostname in the startup routines. The application is being made highly available using HACMP. During testing， the application does not start on the standby node because the hostname was not what the application expected. What can be done to fix this problem？（）A、 Manage the hostname in the application server start ands top scriptsB、 Nothing， because this application cannot be controlled by HACMP and should be startedwith /etc/inittabC、 Change the hard-coded hostname in the application startup routines to use the uname rather than the hostnameD、 Override the default ha_hostname in the cluster configuration to reflect the shared hostname rather than the default ha_hostname
考题
The network security policy requires that only one host be permitted to attach dynamically to each switch interface. If that policy is violated, the interface should shut down. Which two commands must the network administrator configure on the 2950 Catalyst switch to meet this policy (Choose two.)（）。A、Switch1(config-if)# switchport port-security maximum 1B、Switch1(config)# mac-address-table secureC、Switch1(config)# access-list 10 permit ip hostD、Switch1(config-if)# switchport port-security violation shutdownE、Switch1(config-if)# ip access-group 10
考题
The network administrator is trying to add Switch1 to the network， but the 802.1Q trunk is not coming up. Switch1 was previously tested in the laboratory and its trunk configuration worked fine. What are three possible causes of this problem？ （）A、The trunking configuration mode on Switch1 is set to Off.B、The trunking configuration mode on the other end is set to On.C、The trunking configuration mode on the other end is set to Desirable.D、Cisco Discovery Protocol is not running on the other end.E、There is a VTP domain name mismatch.F、Switch1 does not support 802.1Q.
考题
在CiscoIOS交换机上配置交换机名的命令是（）。A、set system name HOSTNAMEB、user HOSTNAME pass PASSWORDC、spanning-treeportfastD、hostname HOSTNAME
考题
Company.com is implementing an HACMP solution. The application ahs a license key based on The hostname. The hostname is also the name used for one of the TCP/IP interfaces. The application vendor has worked with HACMP systems before and is aware of the issue. The preferred method for resolving this issue is to：（） A、 include the hostname in the resource group definition.B、 include the license key in the resource group definition.C、 obtain a second license key for a "standby" system from the application vendor.D、 Set the hostname to be one of the TCP/IP interface included in a resource group.
考题
单选题Company.com has an application that has a hard-coded hostname in the startup routines. The application is being made highly available using HACMP. During testing， the application does not start on the standby node because the hostname was not what the application expected. What can be done to fix this problem？（）A
Manage the hostname in the application server start ands top scriptsB
Nothing， because this application cannot be controlled by HACMP and should be startedwith /etc/inittabC
Change the hard-coded hostname in the application startup routines to use the uname rather than the hostnameD
Override the default ha_hostname in the cluster configuration to reflect the shared hostname rather than the default ha_hostname
考题
单选题在CiscoIOS交换机上配置交换机名的命令是（）。A
set system name HOSTNAMEB
user HOSTNAME pass PASSWORDC
spanning-treeportfastD
hostname HOSTNAME
考题
单选题Company.com is implementing an HACMP solution. The application ahs a license key based on The hostname. The hostname is also the name used for one of the TCP/IP interfaces. The application vendor has worked with HACMP systems before and is aware of the issue. The preferred method for resolving this issue is to：（）A
include the hostname in the resource group definition.B
include the license key in the resource group definition.C
obtain a second license key for a standby system from the application vendor.D
Set the hostname to be one of the TCP/IP interface included in a resource group.
考题
单选题All of the following commands will set the hostname in the ODM database EXCEPT：（）。A
chdevB
odmaddC
hostnameD
smitty hostname
热门标签
最新试卷
