网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）
A
SATA to SCSI
B
SATA to HBA
C
SATA to USB
D
SATA to SAS
参考答案
参考解析
解析：
暂无解析
更多 “单选题An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A SATA to SCSIB SATA to HBAC SATA to USBD SATA to SAS” 相关考题
考题
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware
考题
Which of the following internal storage media types has the GREATEST storage capacity?()
A. Compact flash driveB. SATA hard driveC. Blu-Ray driveD. SDLT Tape drive
考题
After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）A、The DVD-ROM drive has failed.B、An installation file copied from the DVD to the hard drive is corrupt.C、Faulty OS installation DVDD、Incorrect boot sequence in the BIOS
考题
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A、Use a jumper from the motherboard where the new drive is going to be installed.B、Use a jumper from a hard drive that is no longer functioning.C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D、The new hard drive must be replaced
考题
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）A、 The backplane has failed and needs to be replaced.B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.C、 There is a conflict with the optical drive on the server.D、 The server power supply is failing and not providing enough power for all the drives.
考题
A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）A、Failed HBAB、Failed switch portC、Faulty fiber cableD、Faulty driverE、Failed hard drivesF、Faulty configuration
考题
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS
考题
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
考题
An administrator is configuring RAID 1 in a server. The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter. How should the administrator BEST configure these drives？（）A、Install one drive on the first channel and install the second drive on the second channel.B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.
考题
A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）A、The power supply has failed.B、The drive cable is connected backwards.C、The floppy drive has failed.D、The proper drivers have not been loaded.
考题
A user reports that their hard drive has failed and needs to be replaced. Which of the following should the technician do FIRST?（）A、Run the hard disk manufacturer’s diagnostic programB、Re-image the driveC、Replace the hard drive and load WindowsD、Ask the user diagnostic questions
考题
An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）A、The system has a fragmented hard drive.B、The drive interface needs to be changed.C、The user has too many documents on the hard drive.D、The system page file has an issue.
考题
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
考题
Which of the following internal storage media types has the GREATEST storage capacity?（）A、Compact flash driveB、SATA hard driveC、Blu-Ray driveD、SDLT Tape drive
考题
Which of the following utilities will a technician use to determine how many partitions a hard drive has?（）A、Administrator ToolsB、Disk ManagementC、Device ManagerD、Computer Management
考题
A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）A、Windows cannot be booted from a controller card.B、The hard drive must have Windows reinstalled because a new controller card was installed.C、The SATA controller card was not set as a boot device in the computer BIOS.D、The new controller must have the correct jumper settings for Windows mode.
考题
A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape （）A、ddB、tarC、cpioD、restore
考题
A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）A、ddB、tarC、cpioD、restore
考题
A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）A、Remove the physical volume from the system.B、Remove the physical volume from the volume group.C、Remove the physical partitions from the volume group.D、Remove the logical volume copies from the failing drive.
考题
单选题Which of the following internal storage media types has the GREATEST storage capacity？（）A
Compact flash driveB
SATA hard driveC
Blu-Ray driveD
SDLT Tape drive
考题
单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A
The BIOS is set with the wrong boot order.B
The jumpers have not been set on the hard drive.C
The hard drive is not compatible with the system board.D
The boot.ini file needs to be modified.
考题
单选题A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）A
The backplane has failed and needs to be replaced.B
The array must be disbanded and recreated from a backup source to recognize the replacement drive.C
There is a conflict with the optical drive on the server.D
The server power supply is failing and not providing enough power for all the drives.
考题
单选题After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）A
The DVD-ROM drive has failed.B
An installation file copied from the DVD to the hard drive is corrupt.C
Faulty OS installation DVDD
Incorrect boot sequence in the BIOS
考题
单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A
Use a jumper from the motherboard where the new drive is going to be installed.B
Use a jumper from a hard drive that is no longer functioning.C
Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D
The new hard drive must be replaced
考题
单选题An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）A
Check the backplane cabling.B
Check the server BIOS.C
Update the RAID controller firmware.D
Install the latest hard drive firmware
考题
单选题A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）A
chvgB
rmdevC
reducevgD
exportvg
考题
单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）A
Have the client purchase a SATA compatible system board.B
Have the client purchase a SATA to IDE conversion kit.C
Have the client return the drive and purchase an IDE compatible drive.D
Have the client purchase a SCSI to SATA conversion kit.
热门标签
最新试卷
