单选题A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）A The routes on the HMCB The firewall setting of the LAN adapterC The name resolution protocol on the p5 590 serverD The subnet mask settings on the Ethernet adapters

考题 A user is unable to connect to the company‘s intranet server by FQDN, but can connect by IP address. Other users are not having a problem. An administrator verifies that the user can successfully ping the server by IP address and can properly resolve the FQDN using nslookup. The problem is persisting after running ipconfig /flushdns.Which of the following should the administrator do NEXT?（）A. Examine the Imhost file.B. Flush the cache on the DNS server.C. Flush the cache on the WINS server.D. Examine the hosts file

查看答案

考题 A user is unable to connect to the company's intranet server by FQDN, but can connect by IP address. Other users are not having a problem. An administrator verifies that the user can successfully ping the server by IP address and can properly resolve the FQDN using nslookup. The problem is persisting after running ipconfig /flushdns. Which of the following should the administrator do NEXT?（）A、Examine the Imhost file.B、Flush the cache on the DNS server.C、Flush the cache on the WINS server.D、Examine the hosts file

查看答案

考题 A pSeries technical specialist is performing a solutions assurance with a customer for a new single-frame 10-node p655 system being attached to a currently installed HMC. Which of the following questions should be asked to gather all the required information to determine whether the p655 solution can connect to the HMC？（）A、Are there at least ten RS-232 ports available on the HMC？B、Are there at least ten RS-422 ports available on the HMC？C、Are there at least ten RS-232 and two RS-422 ports available on the HMC？D、Are there at least two RS-232 and ten RS-422 ports available on the HMC？

查看答案

考题 A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）A、Verify all HBA settings.B、Upgrade the blade firmware.C、Upgrade the OS level HBA drivers.D、Set the system to boot from the local disk.

查看答案

考题 The HMC software has just been upgraded remotely via the WebSM client. It now needs to be rebooted to make the update active. How can this be accomplished?（）A、Use ssh to connect to the HMC and rebootB、The upgrade will display complete and ask you to rebootC、Select shutdown in the Management section of the WebSM clientD、Once logged out of the WebSM client it will ask to logoff, shutdown or reboot. Select reboot.

查看答案

考题 Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）A、An 8-port adapter to the HMCB、A hub for the private networkC、An additional Ethernet card to the HMCD、An additional Ethernet card for each partition

查看答案

考题 A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）A、The profile data was not initialized after restoring the backup CDB、The profile data was not backed up before doing the Critical Console Data backupC、A Critical Console Data backup was performed which backs up user data， but not profile dataD、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

查看答案

考题 The account executive is asking about post-sales support for a new p5 HMC. They need the pSeries technical specialist to configure an HMC with software support for the customer. Which of the following should the specialist include in the configuration？（）A、SupportlineB、ServiceSuiteC、Software Maintenance Agreement （SWMA）D、Machine Control Program Remote Support Agreement （MCPRSA）

查看答案

考题 A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）A、The routes on the HMCB、The firewall setting of the LAN adapterC、The name resolution protocol on the p5 590 serverD、The subnet mask settings on the Ethernet adapters

查看答案

考题 A system administrator received the following message while trying to ssh to a server： connection timed out.The administrator pinged the server and had no response. The administrator then pinged the gateway， and was successful. Which tool could the administrator use next to isolate the problem？（）A、routeB、tracerouteC、netstat -nrD、broadcast ping

查看答案

考题 A client has an existing p5 570 that is directly connected to a HMC. The customer will be purchasing another p5 570. Which of the following solutions would be appropriate to provide HMC connectivity to the second p5 570?（）A、Implement a proxy server to provide multiple sources to one destination B、Purchase an additional Ethernet adapter for each p5 570 to provide connectivity between the two C、Purchase a network hub or switch so both p5 570s can connect to the single HMC D、Purchase an additional HMC since multiple HMC are required when more than one POWER5 Enterprise class server is used Purchase an additional HMC since multiple HMC? are required when more than one POWER5 Enterprise class server is used

查看答案

考题 A customer currently has five partitioned POWER4 systems and is adding new systems. When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）A、Order a new HMC to support the p5 system.B、Attach the new p5 system to the existing HMC.C、Upgrade the existing HMC to accommodate both the POWER4 and p5 systems.D、Do nothing. This system does not require an HMC.

查看答案

考题单选题Companycom purchased a new p5 570 without a HMC. The customer does not know how to power the full frame/system off since there does not appear to be an on/off button. What can be done to accomplish this task?（）A Telnet into the machine and do a shutdown -FrB Log into ASMI as Administrator and use ASMI menusC Log into the service processor using WebSM and use ASMI menusD Use the off button which is located to the left below the LEDs

查看答案

考题单选题Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）A An 8-port adapter to the HMCB A hub for the private networkC An additional Ethernet card to the HMCD An additional Ethernet card for each partition

查看答案

考题单选题A client has an existing p5 570 that is directly connected to a HMC. The customer will be purchasing another p5 570. Which of the following solutions would be appropriate to provide HMC connectivity to the second p5 570?（）A Implement a proxy server to provide multiple sources to one destination B Purchase an additional Ethernet adapter for each p5 570 to provide connectivity between the two C Purchase a network hub or switch so both p5 570s can connect to the single HMC D Purchase an additional HMC since multiple HMC are required when more than one POWER5 Enterprise class server is used Purchase an additional HMC since multiple HMC? are required when more than one POWER5 Enterprise class server is used

查看答案

考题单选题A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）A Verify all HBA settings.B Upgrade the blade firmware.C Upgrade the OS level HBA drivers.D Set the system to boot from the local disk.

查看答案

考题单选题A pSeries technical specialist is performing a solutions assurance with a customer for a new single-frame 10-node p655 system being attached to a currently installed HMC. Which of the following questions should be asked to gather all the required information to determine whether the p655 solution can connect to the HMC？（）A Are there at least ten RS-232 ports available on the HMC？B Are there at least ten RS-422 ports available on the HMC？C Are there at least ten RS-232 and two RS-422 ports available on the HMC？D Are there at least two RS-232 and ten RS-422 ports available on the HMC？

查看答案

考题单选题Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC. What is required to support this environment?（）A Free up one HMC and update the software for use with the p5 570B Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMCC Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570D Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software

查看答案

考题单选题A user is unable to connect to the company's intranet server by FQDN, but can connect by IP address. Other users are not having a problem. An administrator verifies that the user can successfully ping the server by IP address and can properly resolve the FQDN using nslookup. The problem is persisting after running ipconfig /flushdns. Which of the following should the administrator do NEXT?（）A Examine the Imhost file.B Flush the cache on the DNS server.C Flush the cache on the WINS server.D Examine the hosts file

查看答案

考题单选题A system administrator received the following message while trying to ssh to a server： connection timed out.The administrator pinged the server and had no response. The administrator then pinged the gateway， and was successful. Which tool could the administrator use next to isolate the problem？（）A routeB tracerouteC netstat -nrD broadcast ping

查看答案

考题单选题The account executive is asking about post-sales support for a new p5 HMC. They need the pSeries technical specialist to configure an HMC with software support for the customer. Which of the following should the specialist include in the configuration？（）A SupportlineB ServiceSuiteC Software Maintenance Agreement （SWMA）D Machine Control Program Remote Support Agreement （MCPRSA）

查看答案

考题单选题Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）A An 8-port adapter to the HMCB A hub for the private networkC An additional Ethernet card to the HMCD An additional Ethernet card for each partition

查看答案

考题单选题The HMC software has just been upgraded remotely via the WebSM client. It now needs to be rebooted to make the update active. How can this be accomplished?（）A Use ssh to connect to the HMC and rebootB The upgrade will display complete and ask you to rebootC Select shutdown in the Management section of the WebSM clientD Once logged out of the WebSM client it will ask to logoff, shutdown or reboot. Select reboot.

查看答案

考题单选题A customer currently has five partitioned POWER4 systems and is adding new systems. When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）A Order a new HMC to support the p5 system.B Attach the new p5 system to the existing HMC.C Upgrade the existing HMC to accommodate both the POWER4 and p5 systems.D Do nothing. This system does not require an HMC.

查看答案

考题单选题A user can send e-mail， but cannot receive any e-mail. Which of the following settings should be verified in the e-mail account？（）A MAC addressB TCP/IP addressC POP Server settingsD SMTP Server settings

查看答案

考题单选题A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）A The profile data was not initialized after restoring the backup CDB The profile data was not backed up before doing the Critical Console Data backupC A Critical Console Data backup was performed which backs up user data， but not profile dataD A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

查看答案

考题单选题A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）A The routes on the HMCB The firewall setting of the LAN adapterC The name resolution protocol on the p5 590 serverD The subnet mask settings on the Ethernet adapters

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：