网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
多选题
A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）
A
Router# ping 192.168.13.26
B
Router# debug access-list 172
C
Router# show open ports 192.168.13.26
D
Router# show access-list
E
Router# show ip interface
参考答案
参考解析
解析：
暂无解析
更多 “多选题A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）ARouter# ping 192.168.13.26BRouter# debug access-list 172CRouter# show open ports 192.168.13.26DRouter# show access-listERouter# show ip interface” 相关考题
考题
The network administrator has configured port security on a Ezonexam switch. Why would a network administrator configure port security on this Ezonexam device?A．To prevent unauthorized hosts from getting access to the LANB．To limit the number of Layer 2 broadcasts on a particular switch portC．To prevent unauthorized Telnet or SSH access to a switch portD．To prevent the IP and MAC address of the switch and associated portsE．None of the above
考题
A network administrator is configuring ACLs on a cisco router, to allow affic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0 and 192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）A.access-list 10 permit ip 192.168.147.0 0.0.0.255.255B.access-list 10 permit ip 192.168.149.0 0.0.0.255.255C.access-list 10 permit ip 192.168.146.0 0.0.0.0.255D.access-list 10 permit ip 192.168.146.0 0.0.1.255E.access-list 10 permit ip 192.168.148.0 0.0.1.255F.access-list 10 permit ip 192.168.146.0 255.255.255.0
考题
As a network administrator, you have been instructed to prevent all traffic originating on the LAN from entering the R2 router. Which the following command would implement the access list on the interface of the R2 router?（）A.access-list 101 inB.access-list 101 outC.ip access-group 101 inD.ip access-group 101 out
考题
As a network administrator，you have been instructed to prevent all traffic or iginating on the LAN from entering the R2 router.Which the following command would implement the access list on the interface of theR2 router？（）A.access-list 101 inB.access-list 101 outC.ipaccess-group 101 inD.ipaccess-group 101 out
考题
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A、access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB、access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any anyC、access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD、access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyE、access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyF、access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
考题
A network administrator is configuring ACLs on a cisco router, to allow affic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0 and 192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）A、access-list 10 permit ip 192.168.147.0 0.0.0.255.255B、access-list 10 permit ip 192.168.149.0 0.0.0.255.255C、access-list 10 permit ip 192.168.146.0 0.0.0.0.255D、access-list 10 permit ip 192.168.146.0 0.0.1.255E、access-list 10 permit ip 192.168.148.0 0.0.1.255F、access-list 10 permit ip 192.168.146.0 255.255.255.0
考题
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5.What command should be issued to accomplish this task？（）A、access-list 101 deny tcp192.168.1.1280.0.0.15192.168.1.50.0.0.0eq23 access-list 101 permit ip any anyB、access-list 101 deny tcp192.168.1.1280.0.0.240192.168.1.50.0.0.0eq23 access-list101permit ip any anyC、access-list 1 deny tcp192.168.1.1280.0.0.255192.168.1.50.0.0.0eq21 access-list1permit ip any anyD、access-list 1 deny tcp192.168.1.1280.0.0.15host192.168.1.5eq23 access-list1permit ip any any
考题
A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）A、Router# ping 192.168.13.26B、Router# debug access-list 172C、Router# show open ports 192.168.13.26D、Router# show access-listE、Router# show ip interface
考题
An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested， and the /etc/hosts file has been updated. However，the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem？（） A、 Rerun autodiscovery.B、 Synchronize the cluster.C、 Restart cluster services.D、 Delete and recreate the adapters.
考题
You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）A、The user will be instructed to call the network administrator.B、The user will fail authentication.C、The user will be prompted to install a new device certificate on the MAG Series device.D、The user will successfully authenticate and have full network access.
考题
PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）A、Use the service-policy command to adjust the QOS policy to allow the route to propagate.B、Clear the BGP session.C、Use the release BGP routing command.D、Change both the inbound and outbound policy related to this route.E、None of the other alternatives apply
考题
A router has been configured with the commands router eigrp 9 and network 72.16.1.0 0.0.0.255. No other EIGRP - related commands have been configured. The nswers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which answers list an IP address/prefix length that would cause the router to enable IGRP on Fa0/0?（）A、172.16.0.1/23B、172.16.1.1/26C、172.16.1.1/24D、172 .16.0.255/23E、None of the other answers is correct.
考题
As a network administrator, you have been instructed to prevent all traffic originating on the LAN from entering the R2 router. Which the following command would implement the access list on the interface of the R2 router?（）A、access-list 101 inB、access-list 101 outC、ip access-group 101 inD、ip access-group 101 out
考题
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A、access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB、access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyC、access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD、access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
考题
A user reports they cannot access the network share folder， the users workstation is configured to use automatic IP. When the administrator checks the IP address the response returns as 169.254.0.5. Which of the following should the administrator verify？（）A、 That there are no DHCP relay serversB、 That the user account on Active Directory is not lockedC、 That the network card driver is not installed incorrectlyD、 The network connection is functioning
考题
An AIX server has 2 network interfaces and the system administrator wants to enable the users on the locally configured network interface to be able to connect to systems configured on the global network interface. How is it accomplished？（）A、Enable routed on the serverB、Enable gated on the serverC、Enable ipforwarding on the serverD、Set network options back to default
考题
单选题A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route， but the route still does not appear in any of the routing tables. What should be done topropagate this route？（）A
Clear the BGP sessionB
Change both the inbound and outbound policy related to this routeC
Use the service-policy command to adjust the QOS policy to allow the route to propagateD
Use the release BGP routing command
考题
单选题You are validating the configuration of your SRX Series device and see the output shown below. What does this indicate?（）A
The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.B
The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.C
The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.D
Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.
考题
单选题As a network administrator, you have been instructed to prevent all traffic originating on the LAN from entering the R2 router. Which the following command would implement the access list on the interface of the R2 router?（）A
access-list 101 inB
access-list 101 outC
ip access-group 101 inD
ip access-group 101 out
考题
单选题A user reports they cannot access the network share folder， the users workstation is configured to use automatic IP. When the administrator checks the IP address the response returns as 169.254.0.5. Which of the following should the administrator verify？（）A
That there are no DHCP relay serversB
That the user account on Active Directory is not lockedC
That the network card driver is not installed incorrectlyD
The network connection is functioning
考题
单选题PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）A
Use the service-policy command to adjust the QOS policy to allow the route to propagate.B
Clear the BGP session.C
Use the release BGP routing command.D
Change both the inbound and outbound policy related to this route.E
None of the other alternatives apply
考题
单选题A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5.What command should be issued to accomplish this task？（）A
access-list 101 deny tcp192.168.1.1280.0.0.15192.168.1.50.0.0.0eq23 access-list 101 permit ip any anyB
access-list 101 deny tcp192.168.1.1280.0.0.240192.168.1.50.0.0.0eq23 access-list101permit ip any anyC
access-list 1 deny tcp192.168.1.1280.0.0.255192.168.1.50.0.0.0eq21 access-list1permit ip any anyD
access-list 1 deny tcp192.168.1.1280.0.0.15host192.168.1.5eq23 access-list1permit ip any any
考题
多选题An inbound access list has been configured on a serial interface to deny packet entry for TCP and UDP ports 21, 23 and 25. What types of packets will be permitted by this ACL? （）AFTPBTelnetCSMTPDDNSEHTTPFPOP3
考题
单选题A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A
access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB
access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyC
access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD
access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
考题
单选题You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）A
The user will be instructed to call the network administrator.B
The user will fail authentication.C
The user will be prompted to install a new device certificate on the MAG Series device.D
The user will successfully authenticate and have full network access.
考题
单选题You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has the Routing and Remote Access service enabled and is configured as a network address translation (NAT) router. You need to view a list of the current sessions on the Routing and Remote Access server and the private and public IP addresses and ports that are being used. What should you do?（）A
Run Nbtstat –S. B
Run Netstat –ano. C
From the Routing and Remote Access snap-in, right-click NAT/Basic Firewall and select Export List. D
From the Routing and Remote access snap-in, right-click the interface connected to the Internet and click Show Mappings.
考题
单选题An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested， and the /etc/hosts file has been updated. However，the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem？（）A
Rerun autodiscovery.B
Synchronize the cluster.C
Restart cluster services.D
Delete and recreate the adapters.
热门标签
最新试卷
