网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）
A
Run cluster synchronization.
B
Restart cluster services on Node1.
C
Perform a swap_adapter using C-SPOC
D
Restart cluster services on both nodes
参考答案
参考解析
解析：
暂无解析
更多 “单选题The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）A Run cluster synchronization.B Restart cluster services on Node1.C Perform a swap_adapter using C-SPOCD Restart cluster services on both nodes” 相关考题
考题
In a chassis cluster with two SRX 5800 devices, the interface ge－13／0／0 belongs to which device?()
A. This interface is a system-created interface.B. This interface belongs to node 0 of the cluster.C. This interface belongs to node 1 of the cluster.D. This interface will not exist because SRX 5800 devices have only 12 slots.
考题
In a JSRP cluster with two J6350 routers, the interface ge－7／0／0 belongs to which device? ()
A. This interface is a system-created interface.B. This interface belongs to NODE0 of the cluster.C. This interface belongs to NODE1 of the cluster.D. This interface will not exist because J6350 routers have only six slots.
考题
A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A、rg1 is configured with a delayed fallback timerB、Settling time policy has not been configured for rg1C、Node1 does not have sufficient resources to support rg1D、Node2 is the first in the ’Default Node Priority’ list for resource group rg1
考题
In a chassis cluster with two SRX 5800 devices， the interface ge-13/0/0 belongs to which device？（）A、This interface is a system-created interface.B、This interface belongs to node 0 of the cluster.C、This interface belongs to node 1 of the cluster.D、This interface will not exist because SRX 5800 devices have only 12 slots.
考题
A system administrator has determined that there is no network connectivity with the en0 interface. By doing a netstat -in, it is determined that the en0 interface is not showing up. Which of the following commands should be used to determine that en0 is defined in ODM with an IP address?（）A、 entstat -d B、 ifconfig -a C、 lsattr -El en0 D、 odmget -q "name=ent0 and attribute=netaddr" CuDv
考题
In a cluster using /etc/hosts for name resolution， which of the following describes the minimum requirementsfor the /etc/hosts file？（）A、IP address and IP label of each service and boot interface in the clusterB、IP address and IP label of each service and boot interface in the cluster， loopback interface， and the hostname of the nodeC、IP address and IP label of each service and boot interface in the cluster， the loopbackinterface， and the cluster gatewayD、IP address and IP label of each service and boot interface in the cluster， the loopbackinterface， the cluster gateway， and the subnet network addresses
考题
Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue？（） A、 Disk heartbeatB、 Error notificationC、 Event notificationD、 Application monitor
考题
An administrator has a 2 node cluster running PowerHA version 5.5. They remove a resource group from theactive cluster configuration. When performing a verify and synchronize of the cluster， the administrator getsthe following error： "migcheck[471]： cl_connect（） error， nodename=Node1， rc=-1 cldare： A communication error prevents obtaining the VRMF from remote nodes. A DARE event cannot be run until this is corrected. Please ensureclcomd is running." What is the most likely cause of this error？（）A、There is a DARE lock in placeB、A PowerHA migration is in progressC、Cluster services is not active on the other nodeD、The other cluster node is running a different version of RSCT
考题
A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（） A、 The resource group DNP has been configured.B、 The resource group option CWOF has been enabled.C、 The resource group option Inactive Takeover is set.D、 A resource group fallback timer has been configured.
考题
An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）A、The operating system crashedB、A disk failure forced a volume group off lineC、The System Resource Controller executed a system haltD、The topology services daemon has crashed due to an ODM mismatch
考题
How is an IP address removed from a network interface？（）A、rmdev -dl ent0B、ifconfig en0 downC、ifconfig en0 deleteD、ifconfig ent0 detach
考题
After updating serverB’s network configurations， an administrator notices that serverA， which resides in a different subnet， is unable to communicate with serverB via ssh or telnet. As ping’s to the server fail， the administrator logs onto serverB via a console and finds an available interface en0 in the ’up’ state. From the console connection， en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem？（）A、en0 has no associated ip address.B、serverB is missing its default route.C、serverB and serverA cannot connect due to a firewall.D、en0 has been set up to block traffic from servers that are in different subnets.
考题
An administrator has a two node cluster， Node1 and Node2， running resource group rg1. The resource groupis active on Node1. The administrator stopped cluster services and unmanaged the resource group on Node1to work on a problem. Now the administrator needs to move rg1 to Node2. Which of the following will achievethis？（）A、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Manually’ and select the destination ofNode2B、Perform a resource group move operation from Node1 to Node2 and select the option to ’Re-manageResource Groups’ set to ’Automatically’C、Perform a clstop on Node1 with option to move resource groups， this will release the resource group fromNode1 and accquire the resource group on Node2.D、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Automatically’， then perform a resourcegroup move operation to move rg1 from Node1 to Node2
考题
A network for a two-node cluster has been planned. The network administrator has explained that the networkdoes not support gratuitous ARP. Which of the following steps will ensure that clients are able to connect tothe cluster after a failover takes place？（）A、Implement heartbeating over IP aliasesB、Implement persistent service IP addressesC、Implement IPAT aliasing with hardware address takeover （HWAT）D、Implement IPAT replacement with hardware address takeover （HWAT）
考题
In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）A、This interface is a system-created interface.B、This interface belongs to NODE0 of the cluster.C、This interface belongs to NODE1 of the cluster.D、This interface will not exist because J6350 routers have only six slots.
考题
An administrator was notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 had been powered off. Upon restarting Node1 the administrator checked the AIXerror log and the cluster.log Which of the following is most likely the cause of the failover？（）A、AIX was shut downB、A fatal corruption occurred in the gsclvmd daemonC、The topsvcs daemon was stopped by the system resource controllerD、The grpsvcs process was stopped by the system resource controller
考题
单选题A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A
rg1 is configured with a delayed fallback timerB
Settling time policy has not been configured for rg1C
Node1 does not have sufficient resources to support rg1D
Node2 is the first in the ’Default Node Priority’ list for resource group rg1
考题
单选题A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（）A
The resource group DNP has been configured.B
The resource group option CWOF has been enabled.C
The resource group option Inactive Takeover is set.D
A resource group fallback timer has been configured.
考题
单选题You have a server that runs Windows Server 2008 Enterprise Edition. The server has the FailoverClustering feature installed. The server has three nodes named NODE1， NODE2， and NODE3. The Microsoft Distributed Transaction Coordinator （MSDTC） resource is installed on the cluster. The cluster hasa dedicated cluster group named Group1 that includes the MSDTC resource. You discover that Group1 isunable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functionswithout errors. You need to configure Group1 to support the failover between all cluster nodes. What should you do？（）A
Remove the MSDTC resource from Group1B
Select NODE3 as a preferred owner for Group1C
Remove NODE3 as a possible owner from all cluster resources in Group1D
Onfigure NODE3 as a possible owner for all cluster resources in Group1
考题
单选题You have a server that runs Windows Server 2008 Enterprise Edition. The server has the Failover Clustering feature installed. The server has three nodes named NODE1， NODE2， and NODE3. The Microsoft Distributed Transaction Coordinator （MSDTC） resource is installed on the cluster. The cluster has a dedicated cluster group named Group1 that includes the MSDTC resource. You discover that Group1 is unable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functions without errors. You need to configure Group1 to support the failover between all cluster nodes. What should you do？（）A
Remove the MSDTC resource from Group1.B
Select NODE3 as a preferred owner for Group1.C
Remove NODE3 as a possible owner from all cluster resources in Group1.D
Configure NODE3 as a possible owner for all cluster resources in Group1.
考题
单选题What is the functionality of redundant interfaces （reth） in a chassis cluster？（）A
reth interfaces are used only for VRRP.B
reth interfaces are the same as physical interfaces.C
reth interfaces are pseudo-interfaces that are considered the parent interface for two physical interfaces.D
Each cluster member has a reth interface that can be used to share session state information with the other cluster members.
考题
单选题A system administrator has determined that there is no network connectivity with the en0 interface. By doing a netstat -in, it is determined that the en0 interface is not showing up. Which of the following commands should be used to determine that en0 is defined in ODM with an IP address?（）A
entstat -d B
ifconfig -a C
lsattr -El en0 D
odmget -q name=ent0 and attribute=netaddr CuDv
考题
单选题Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue？（）A
Disk heartbeatB
Error notificationC
Event notificationD
Application monitor
考题
单选题In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）A
This interface is a system-created interface.B
This interface belongs to NODE0 of the cluster.C
This interface belongs to NODE1 of the cluster.D
This interface will not exist because J6350 routers have only six slots.
考题
单选题A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A
rg1 is configured with a delayed fallback timerB
Settling time policy has not been configured for rg1C
Node1 does not have sufficient resources to support rg1D
Node2 is the first in the ’Default Node Priority’ list for resource group rg1
考题
单选题An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）A
The operating system crashedB
A disk failure forced a volume group off lineC
The System Resource Controller executed a system haltD
The topology services daemon has crashed due to an ODM mismatch
考题
单选题An administrator was notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 had been powered off. Upon restarting Node1 the administrator checked the AIXerror log and the cluster.log Which of the following is most likely the cause of the failover？（）A
AIX was shut downB
A fatal corruption occurred in the gsclvmd daemonC
The topsvcs daemon was stopped by the system resource controllerD
The grpsvcs process was stopped by the system resource controller
热门标签
最新试卷
