网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
Refer to the exhibit. Currently the two eBGP links between AS100 and AS200 have an average inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）
A. neighbor 192.168.30.2 route - map as_50 out
B. neighbor 192.168.20.2 route - map as_50 out
C. route - map as_50 permit 10 match ip address 50 set metric 150 a ccess - list 50 permit 10.10.1.16 0.0.0.240
D. route - map as_50 permit 10 match ip address 50 set metric 150 access - list 50 permit 10.10.1.32 0.0.0.240
参考答案
更多 “ Refer to the exhibit. Currently the two eBGP links between AS100 and AS200 have an average inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）A. neighbor 192.168.30.2 route - map as_50 outB. neighbor 192.168.20.2 route - map as_50 outC. route - map as_50 permit 10 match ip address 50 set metric 150 a ccess - list 50 permit 10.10.1.16 0.0.0.240D. route - map as_50 permit 10 match ip address 50 set metric 150 access - list 50 permit 10.10.1.32 0.0.0.240 ” 相关考题
考题
Refer to the exhibit. You have a non-Cisco switch that is not communicating properly while connected to the distribution-layer Cisco switching fabric.Which two best-practice actions can you take to overcome this problem? （）(Choose two.)A. Turn off MST (802.1s) on all switches.B. Turn on MST (802.1s) on all switches.C. Turn on RSTP (802.1w) on all switches.D. Turn off RSTP (802.1w) on all switches.
考题
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B
考题
Refer to the exhibit. ROUTE.com is planning to implement a secure OSPF network to support traffic between clients on the 172.16.10.0/24 network and the file server on the 172.16.20./24 network. You have been asked to review the implementation and verification plans for this OSPF project. Which statement about the plan is true? （）A. It is complete as writtenB. It should include a task that verifie s that the interarea routes are using the proper MEDC. It should include a task that verifies that load sharing is active on R1 and R4D. It should include a task that verifies that all redundant links will become active when the primary links are sh ut down
考题
Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()
A. traffic - share balancedB. distanceC. maximum- pathsD. default - networkE. variance
考题
Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? （）A. On router A, set the default local - preference to 50.B. On router B, set the default metric to 150.C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.D. On router B, set the default local -preference to 150.
考题
Refer to the above exhibit. Why is the 140.140.0.0 network not used as the gateway of last resort even though it is configured first?()
A.The last default - network statement will always be preferred.B.A route to the 140.140.0.0 network does not exist in the routing table.C.Default - network selection will always prefer the statement with the lowest IP address.D.A router will load balance across multiple default - networks; repeatedly issuing the show ip route command would show the gateway of last resort changing between the two networks.
考题
Refer to the exhibit. The Route.com company is running EIGRP between all the r outers. Currently, if one of the LAN links (LAN1 or LAN2) at the headquarters flaps (goes up and down), the HQRTR1 and HQ - RTR2 routers will experience high CPU usage and have a long EIGRP convergence time. As the new network administrator, you are asked to investigate this situation and determine if there is a quick way to resolve this issue. Which is the most important thing that you can quickly verify first to resolve this issue?（）A. Verify that the bandwidth setting on all WAN links is correct.B. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured to send only a default route to all the spoke routers.C. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured for EIGRP Nonstop Forwarding.D. Verify that all the spoke routers are co nfigured for autosummarization.E. Verify that all the spoke routers are configured as EIGRP stub.
考题
Refer to the exhibit. You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes. Before you begin the actual implementation, which three pieces of information are more important to know than the others?（）A. the Committed Information Rate of all the Frame Relay PVCsB. the Cisco IOS version running on all the routersC. the router model number of all the spoke routersD. the number of HQ networks connected behind the headquarter routersE. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers
考题
Refer to the exhibit. This network is running IS － IS. Router RTC is inside Cloud1. From the output on RTD, which two statement s are true?()
A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packetsB.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLCC.The SNPA for RTE is the source data link address that is used to transmit frames to RTDD.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLCE.The NET for RTE will be 49.0150.0019.06b7.fd5f.00F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS
考题
Refer to the exhibit. Which two statement s are correct?()
A. All the routes were redistributed into BGP from an IGPB. All the routes were originated by BGP with the network commandC. All six routes will be installed in the routing tableD. Four routes will be installed in the routing ta bleE. Two routes will be installed in the routing table
考题
Refer to the exhibit. Which two statements are true about the partial configuration that is provided.()
A. The peer group shortens the EBGP configurationB. The peer group shortens the IBGP configurationC. All the configured neighbors are in autonomous system 100D. Three AS - path filters are applied to each BGP neighborE. Only the outgoing filters are applied to BGP updates
考题
Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?()
A. FWSM routes traffic between the VLANs.B. FWSM switches traffic between the VLANs.C. Transparent mode is often called bump-in-the-wire mode.D. Transparent mode firewall deployments are used most often in current designs.E. Traffic routed between VLANs is subject to state tracking and other firewall configurable options.
考题
Refer to the exhibit. Switch port FastEthernet 0/24 on AlSwitch1 will be used to create an IEEE 802.1Q- complaint trunk to another switch. Based on the output shown, What is the reason the trunk does not form, even thought the proper cabling has been attached?（）A.VLANs have not been created yetB.An IP address must be configured for the portC.The port is currently configured for access modeD.The correct encapsulation type has not been configuredE.The no shutdown command has not been entered for the port
考题
Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）A、As numbers must be changed to match on all the routers.B、Loopback interface must be configured so a DR is elected.C、The no auto-summary command is needed on Router A and Router C.D、Router B needs to have two network statements, one for each connected network.
考题
Refer to the exhibit. There are two sites connected across WAN links. All intersite and intrasite links always have the same routing metric. The network administrator sees only the top routers and links being used by hosts at both LAN A and LAN B. What would be two suggestions to load-balance the traffic across both WAN links？（）A、 Make HSRP track interfaces between the edge and core routers.B、 Replace HSRP with GLBP. 用GLBP替换HSRPC、 Add crossed intrasite links： R1-R4， R2-R3， R5-R8， and R6-R7.D、 Make R3 and R8 have lower HSRP priority than R1 and R7.E、 Replace HSRP with VRRP
考题
已知某银行在市行与省行之间共有3 条线路，并且希望不同的业务使用不同的链路，并且需要相互备份，上图中针对OA（视频），RTA 向RTC 设置了MED=10，RTB 向RTC 设置了MED=20，RTA 设置了local-preference=20，RTB 设置了local-preference=10，选择路径叙述正确的是（） A、 从AS100 到AS200 的OA（视频）业务到达RTA 后，选择RTA-RTC 路径B、 从AS100 到AS200 的OA（视频）业务到达RTB 后，选择RTB-RTC 路径C、 从AS200 到AS100 的OA（视频）业务到达RTC 后，选择RTC-RTA 路径D、 从AS200 到AS100 的OA（视频）业务到达RTC 后，选择RTC-RTB 路径
考题
Option 10C is an implementation of Inter-AS MPLS VPN. Which two statements about Option 10C aretrue？（）A、Great scalability is offeredB、Route Target Rewrite must be configured on ASBRsC、Multihop EBGP is utilized between route reflectorsD、Multihop EBGP is utilized between ASBRsE、The ASBRs hold VPNv4 routes
考题
Which three conditions can cause BGP n eighbor establishment to fail?（）A、The IBGP neighbor is not directly connected.B、BGP synchronization is enabled in a transit autonomous system with fully - meshed IBGP neighbors.C、The EBGP neighbor ebgp - multihop option is set to the de fault value.D、The BGP update interval is different between the two BGP neighbors.E、The BGP neighbor is referencing an incorrect autonomous system number in its neighbor statement.F、There is an access list blocking all TCP traffic between the two BGP neighbors.
考题
Two DS8700 systems have been proposed for a disk-to-disk BC solution. Each system has 200 TB installed， with a data change rate of 18% per day. Two 2 Gbps CWDM links are in place between the remote data centers with an average utilization rate of 55%. The proposed solution includes additional CWDM ports. Which of the following should justify the additional CWDM ports（）A、the Disk Magic configuration reportB、an engineer from thetelcom providing the dark fiberC、the bandwidth calculationsD、aCompeteLine analysis
考题
Routers A and B have an OC12c and a GE link between them and are running OSPF over both of these links.Which item is correct， assuming the default JUNOS software OSPF metric calculation？（）A、There are two equal cost paths between A and BB、The GE link is the preferred path between A and BC、The OC12c link is the preferred path between A and BD、Manual metric assignment must be configured to determine the outcome.
考题
多选题Refer to the exhibit. Which two statements are correct？ （Choose two.）（）AAll six routes will be installed in the routing table.BTwo routes will be installed in the routing table.CFour routes will be installed in the routing table.DAll the routes were redistributed into BGP from an IGP.EAll the routes were originated by BGP with the network command.
考题
单选题Two DS8700 systems have been proposed for a disk-to-disk BC solution. Each system has 200 TB installed， with a data change rate of 18% per day. Two 2 Gbps CWDM links are in place between the remote data centers with an average utilization rate of 55%. The proposed solution includes additional CWDM ports. Which of the following should justify the additional CWDM ports（）A
the Disk Magic configuration reportB
an engineer from thetelcom providing the dark fiberC
the bandwidth calculationsD
aCompeteLine analysis
考题
单选题Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. There are two parallel serial links between the two rou ters. The implementation plan calls for each router to base their BGP TCP connection on their respective loopback1 interfaces, with IP addresses 1.1.1.1 and 2.2.2.2, respectively. Which of the following commands would not be part of a working eBGP confi guration on Router R1?（）A
router bgp 1B
neighbor 2.2.2.2 remote- as 2C
neighbor 2.2.2.2 update - source loopback1D
neighbor 2.2.2.2 multihop 2
考题
单选题Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）A
As numbers must be changed to match on all the routers.B
Loopback interface must be configured so a DR is elected.C
The no auto-summary command is needed on Router A and Router C.D
Router B needs to have two network statements, one for each connected network.
考题
多选题Refer to the exhibit. Which two statements are correct？（）AAll six routes will be installed in the routing tableBTwo routes will be installed in the routing tableCFour routes will be installed in the routing tableDAll the routes were redistributed into BGP from an IGPEAll the routes were originated by BGP with the network command
考题
多选题Refer to the exhibit. There are two sites connected across WAN links. All intersite and intrasite links always have the same routing metric. The network administrator sees only the top routers and links being used by hosts at both LAN A and LAN B. What would be two suggestions to load-balance the traffic across both WAN links？（）AMake HSRP track interfaces between the edge and core routers.BReplace HSRP with GLBP. 用GLBP替换HSRPCAdd crossed intrasite links： R1-R4， R2-R3， R5-R8， and R6-R7.DMake R3 and R8 have lower HSRP priority than R1 and R7.EReplace HSRP with VRRP
考题
单选题You have two EBGP peers connected via two parallel serial lines. What should you do to be able to load-balance between two EBGP speakers over the parallel serial lines in both directions？ （）A
nothing，BGP automatically load-balances the traffic between different autonomous systems on all available linksB
peer between the eBGP speaker’s loopbacks， configuring eBGP multihop as required， and use an IGP to load-share between the two equal-cost paths between the loopback addressesC
configure a loopback as update source for both EBGP peers and have on each AS an IGP to introduce two equal-cost paths to reach the EBGP peer loopback address；it is also necessary to use the next-hop-self commandD
use the ebgp-load-balance command on the neighbor statement on both sidesE
configure a loopback as update source for both EBGP peers and have on each AS an IGP to introduce two equal-cost paths to reach the peer loopback address；it is also necessary to use the ebgp-multihop and next-hop-self commands
热门标签
最新试卷
