网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?()
A. Router(config-router)# network 192.168.10.0 0.0.0.255 0
B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
C. Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
D. Router(config)# router ospf 0
E. Router(config)# router ospf 1
参考答案
更多 “ Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?() A. Router(config-router)# network 192.168.10.0 0.0.0.255 0B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C. Router(config-router)# network 192.168.10.0 255.255.255.0 area 0D. Router(config)# router ospf 0E. Router(config)# router ospf 1 ” 相关考题
考题
Routers R1 and R2, OSPF neighbors in area 0 over their Fa0/0 interfaces (respectively), currently both successfully use OSPF MD5 authentication. The OSPF configuration includes the area 0 authentication command under the router ospf 1 command.Which of the following commands must have been configur ed on R1‘s Fa0/0 interface?（）A. ip ospf authentication nullB. ip ospf authentication message - digestC. ip ospf authentication -key whatever- it - isD. ip ospf message - digest - key 1 md5 whatever - it - isE. ip ospf md5 1 key whatever - it - is
考题
When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?()
A. OSPF process IDB. OSPF router IDC. OSPF network typeD. OSPF memory usageE. OSPF CPU utilizationF. OSPF stub area configurations
考题
Which of the following are characteristics of OSPF areas?()
A. Hierarchical OSPF networks need to be in one areaB. Multiple OSPF areas must connect to area 0C. Single area OSPF networks must be configured in area 1D. Areas can be assigned any number from 0 to 63535E. Area 0 is called the backbone areaF. Each OSPF area need to be configured with a loopback interface
考题
Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()
A. A virtual link to area 0.B. OSPF summarization command.C. default - cost extension to the area command.D. no - summary extension to the area stub comm and.E. None of the other alternatives apply
考题
What OSPF command, when configured, will include all interfaces into area 0?()
A.network 0.0.0.0 255.255.255.255 area 0B.network 0.0.0.0 0.0.0.0 area 0C.network 255.255.255.255 0.0.0.0 area 0D.network all-interfaces area 0
考题
Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）A、A virtual link to area 0.B、OSPF summarization command.C、default - cost extension to the area command.D、no - summary extension to the area stub comm and.E、None of the other alternatives apply
考题
A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）A、172.16.0.1/23B、172.16.1.1/26C、172.16.1.1/24D、172.16.0.255/23E、None of the other answers is correct.
考题
When an OSPF design is planned, which implementation can help a router not have memory resource issues?（）A、Have a backbone area (area 0) with 40 routers and use default routes to reach external destinationsB、Have a backbo ne area (area 0) with 4 routers and 30,000 external routes injected into OSPFC、Have less OSPF areas to reduce the need for interarea route summarizationsD、Have multiple OSPF processes on each OSPF router. Example, router ospf 1, router ospf 2
考题
When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?（）A、OSPF process IDB、OSPF router IDC、OSPF network typeD、OSPF memory usageE、OSPF CPU utilizationF、OSPF stub area configurations
考题
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、TestKingRouter(config)# router ospf 0B、TestKingRouter(config)# router ospf 1C、TestKingRouter(config)# router ospf area 0D、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0E、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0F、TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0
考题
What OSPF command, when configured, will include all interfaces into area 0?（）A、network 0.0.0.0 255.255.255.255 area 0B、network 0.0.0.0 0.0.0.0 area 0C、network 255.255.255.255 0.0.0.0 area 0D、network all-interfaces area 0
考题
Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）A、All OSPF networks require the use of multiple areasB、Multiple OSPF areas must connect to area 0C、Single area OSPF networks must be configured in area 1D、Areas can be assigned any number from 0 to 63535E、Area 0 is called the backbone areaF、Each OSPF area need to be configured with a loopback interface
考题
In JUNOS software, which statement is true regarding the OSPF advertisement of the loopback IP address on the ABR?（）A、When Area 0 is active, the loopback interface must be configured in OSPF for it to be advertised.B、When Area 0 is active, the loopback address is automatically advertised into other areas.C、When Area 0 is active, the OSPF router-id must match the loopback address for the loopback address to be advertised.D、When Area 0 is active, the router-id must be configured for the loopback address to be advertised.
考题
两台MSR路由器MSR-1和MSR-2通过192.168.1.0/24网段互连。现在需要在路由器MSR-1上配置OSPF协议，与MSR-2正常建立邻接关系，下列哪项配置是可行的？（）A、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.255.255B、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.32.255C、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.15.255D、[MSR-1]ospf [MSR-1-ospf-1]area0 MSR-1-ospf-1-area-0.0.0.0]network192.168.16.00.0.31.255
考题
两台MSR路由器通过OSPF实现动态路由学习，在其中一台路由器MSR-1上有三个接口IP地址分别为192.168.8.1/24、192.168.13.254/24和192.168.29.128/24，那么要通过一条network命令在这三个接口上启动OSPF，下列哪项配置是可行的？（）A、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.255.255B、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.32.255C、[MSR-1]ospf；[MSR-1-ospf-1]area0；[MSR-1-ospf-1-area-0.0.0.0]network192.168.1.00.0.63.255
考题
Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、Router(config)#router ospf 1B、Router(config)#router ospf 0C、Router(config)#router ospf area 0D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E、Router(config-router)#network 192.168.16.0 0.0.0.255 0F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
考题
Which of the following are characteristics of OSPF areas?（）A、Hierarchical OSPF networks need to be in one areaB、Multiple OSPF areas must connect to area 0C、Single area OSPF networks must be configured in area 1D、Areas can be assigned any number from 0 to 63535E、Area 0 is called the backbone areaF、Each OSPF area need to be configured with a loopback interface
考题
Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）A、Router(config-router)# network 192.168.10.0 0.0.0.255 0B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0D、Router(config)# router ospf 0E、Router(config)# router ospf 1
考题
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、Router(config)#router ospf 1B、Router(config)#router ospf 0C、Router(config)#router ospf area 0D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E、Router(config-router)#network 192.168.16.0 0.0.0.255 0F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
考题
什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0B、router ospf network 10.1.1.0 0.0.0.255C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0E、router ospf network 10.1.1.0 255.255.255.0 area 0F、router ospf 1 network 10.1.1.0 0.0.0.255
考题
多选题Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）ATestKingRouter(config)# router ospf 0BTestKingRouter(config)# router ospf 1CTestKingRouter(config)# router ospf area 0DTestKingRouter(config)# network 192.168.16.0 0.0.0.255 0ETestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0FTestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0
考题
多选题Which of the following are characteristics of OSPF areas?（）AHierarchical OSPF networks need to be in one areaBMultiple OSPF areas must connect to area 0CSingle area OSPF networks must be configured in area 1DAreas can be assigned any number from 0 to 63535EArea 0 is called the backbone areaFEach OSPF area need to be configured with a loopback interface
考题
多选题You want to limit the number of Type 7 LSAs to be converted into Type 5 LSAs at an appropriate ARB. Which two commands should you use from the [edit] hierarchy level within the JUNOS software configuration mode？（）Aset protocols ospf area-range network/mask-lengthBset protocols ospf area area-id nssa area-range network/mask-lengthCset protocols ospf area area-id area-range network/mask-length restrictDset protocols ospf area area-id nssa area-range network/mask-length restrict
考题
多选题Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）AAll OSPF networks require the use of multiple areasBMultiple OSPF areas must connect to area 0CSingle area OSPF networks must be configured in area 1DAreas can be assigned any number from 0 to 63535EArea 0 is called the backbone areaFEach OSPF area need to be configured with a loopback interface
考题
多选题Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）ARouter（config）#router ospf 1BRouter（config）#router ospf 0CRouter（config）#router ospf area 0DRouter（config-router）#network 192.168.16.0 0.0.0.255 area 0ERouter（config-router）#network 192.168.16.0 0.0.0.255 0FRouter（config-router）#network 192.168.16.0 255.255.255.0 area 0
考题
多选题Routers R1 and R2, OSPF neighbors in area 0 over their Fa0/0 interfaces (respectively), currently both successfully use OSPF MD5 authentication. The OSPF configuration includes the area 0 authentication command under the router ospf 1 command. Which of the following commands must have been configur ed on R1's Fa0/0 interface?（）Aip ospf authentication nullBip ospf authentication message - digestCip ospf authentication -key whatever- it - isDip ospf message - digest - key 1 md5 whatever - it - isEip ospf md5 1 key whatever - it - is
考题
多选题A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）A172.16.0.1/23B172.16.1.1/26C172.16.1.1/24D172.16.0.255/23ENone of the other answers is correct.
考题
多选题You want to limit the number of Type 7 LSAs to be converted into Type 5 LSAs at an appropriateABR. Which two commands should you use from the [edit] hierarchy level within JUNOS configuration mode?（）Aset protocols ospf area-range network/mask-lengthBset protocols ospf area area-id nssa area-range network/mask-lengthCset protocols ospf area area-id area-range network/mask-length restrictDset protocols ospf area area-id nssa area-range network/mask-length restrict
热门标签
最新试卷
