网友您好, 请在下方输入框内输入要搜索的题目:

题目内容 (请给出正确答案)

在AWS上配置VOICE VLAN时,service type选择()。

  • A、RB VLAN
  • B、L2 Terminated VLAN
  • C、Stacking VLAN
  • D、Voice VLAN

参考答案

更多 “在AWS上配置VOICE VLAN时,service type选择()。A、RB VLANB、L2 Terminated VLANC、Stacking VLAND、Voice VLAN” 相关考题
考题 下面用于在交换机中配置Trunk承载的VLAN的命令是( ) A、access vlan vlan-idB、port link-type trunkC、port trunk allow-pass vlanD、set port vlan vlan-id

考题 以下哪几种技术是用来解决在VLAN规划中VLAN数目不够的问题()。 A.Super-VLANB.Isolate-user-VLANC.QinQD.Voice-VLAN

考题 SwitchA是未做过任何配置的二层交换机。SwitchA上配置管理VLAN为VLAN100。SwitchA的以太网端口E0/1为Trunk端口,连接到SwitchB。同时SwitchB提供DHCPServer功能。要求SwitchA的VLAN接口100动态获取IP地址。要实现组网需求,需要对端口、VLAN和VLAN接口分别做相应配置。下列步骤中,不完整的是()。 A.E0/1端口设置:[SwitchA-Ethernet0/1]port link-type trunkB.创建VLAN100:[SwitchA]vlan 100C.创建VLAN100的接口:[SwitchA]interface Vlan-interface 100D.为VLAN接口100配置IP地址:[SwitchA-Vlan-interface100]ip address dhcp-alloc

考题 某台华为交换机做了如下配置:[SWD]interface ethernet1/0/1[SWD-Ethernet1/0/1]port link-type hybrid[SWD-Ethernet1/0/1]port hybrid untagged vlan 3[SWD-Ethernet1/0/1]port vlan-stacking vlan 200 to 300 stack-vlan 3 [SWD]interface ethernet 1/0/1[SWD-Ethernet1/0/1]qinq protocol 0x9100关于此配置的说明不正确的是()A.port link-type hybrid是配置接口类型为hybrid,灵活QinQ的接入端口类型可以配置为trunk或hybrid,根据具体情况而定B.Ethernet1/0/1接口在发送帧时会将帧中的vlan 3 Tag剥离C.在VLAN 200到300的用户VLAN上剥离VLAN 3TagD.qinq protocol 0x9100命令是修改TPID字段取值

考题 关于VLAN聚合,下面说法正确的是() A.配置sub-VLAN的命令是在super VLAN视图下配置的B.Super VLAN的可配置范围为1~4094C.配置Super VLAN时,配置的VLAN必须没有加入任何端口D.配置Super VLAN的命令是aggregate-vlan

考题 某台华为交换机做了如下配置: [HUAWEI]interface ethernet 1/0/1[HUAWEI-Ethernet1/0/1]port link-type hybrid[HUAWEI-Ethernet1/0/1]port hybrid untagged vlan 3 关于此配置的说明正确的是( ) A.port link-type hybrid 是配置接口类型为hybrid B.Ethernet1/0/1 接口在发送帧时会将帧中的vlan 3 Tag 标记为untag C.VLAN 上剥离VLAN 3 的unTag标记 D.Ethernet1/0/1 接口在接收帧时会将帧中的vlan 3 Tag 剥离。

考题 在ITN2100设备上配置G.8032时,如使用CFM检测,端口VLAN,业务VLAN,协议VLAN之间的关系,正确的是().A、端口VLAN包含业务VLAN;B、业务VLAN包含协议VLAN;C、协议VLAN包含业务VLAN;D、端口VLAN包含协议VLAN;

考题 在一个正常配置中,IVPS应该同时属于OAM、MEGACO、Voice三个VLAN。

考题 配置灵活qiNq之前,先进行保留vLAN的规划,建议配置的保留vLAN段在()。保留vLAN段配置后,用户的业务vLAN配置不要和保留vLAN配置有重叠。

考题 What does the interface subcommand switchport voice vlan 222 indicate?()A、The port is configured for both data and voice traffic.B、The port is fully dedicated to forwarding voice traffic.C、The port will operate as an FXS telephony port.D、Voice traffic will be redirected to VLAN 222.

考题 Which two statements are true about voice VLANs?()A、Voice VLANs are only used when connecting an IP phone and a host to distinct switch portsB、Access ports that are configured with voice VLANs will always trust the CoS that is received from IP phonesC、Access ports that are configured with voice VLANs may or may not override the CoS value that is received from an IP phoneD、Voice VLANs are configured using the switchport voice vlan vlan-ID interface configuration commandE、Voice VLANs provide a trunking interface between an IP phone and an access port on a switch to allow traffic from multiple devices that are connected to the portF、Enabling Voice VLAN on a switch port will automatically configure the port to trust the incoming CoS markings

考题 关于Voice VLAN的端口过滤模式,说法正确的有()。A、Voice VLAN的端口过滤模式可以分为安全模式和普通模式两种B、对于普通模式下,端口力口入Voice VLAN后设备不再检验报文的MAC地址C、安全模式下,设备将对每一个要进入Voice VLAN传输的报文都进行MAC匹配检査D、缺省情况下,Voice VLAN工作在普通模式

考题 以下哪几种技术是用来解决在VLAN 规划中VLAN 数目不够的问题()   A、 Super-VLANB、 Isolate-user-VLANC、 QinQD、 Voice-VLAN

考题 在AWS上配置Signaling VLAN时,service type选择()。A、RB VLANB、L2 Terminated VLANC、Stacking VLAND、Voice VLAN

考题 ISAM-V 可以用AWS管理和配置,在AWS用来管理IVPS的模块叫什么

考题 用AWS创建Voice VLAN时,下列哪些说法是正确的A、System Mode选择VoiceB、Service Name可以自己定义C、State选择Under ConstructionD、VLAN Settings中,Stack Type选择Unstacked C_VLAN

考题 用AWS创建Signaling VLAN时,下列哪些说法是正确的A、System Mode选择Residential BridgeB、Service Name可以自己定义C、State选择Ready for useD、VLAN Settings中,Stack Type选择Unstacked C_VLAN

考题 在配置ISAM-V系统过程中,需要配置Voice和MEGACO VLAN,而OAM VLAN已经是默认了的。

考题 要想让S3026透传vlan100,必须要在S3026上配置哪些命令()。A、vlan 100B、port link-type trunkC、port trunk permit vlan 100D、port trunk pvid vlan 1

考题 Which statement is true about voice VLANs? ()A、When the voice VLAN feature is enabled, all untagged voice and data traffic is sent through the voice VLAN.B、The voice VLAN feature is enabled by default.C、The IP phone overrides the priority of all incoming data traffic (tagged and untagged) and sets the CoS value to 0.D、The default CoS value is 1 for incoming voice and data traffic.

考题 填空题配置灵活qiNq之前,先进行保留vLAN的规划,建议配置的保留vLAN段在()。保留vLAN段配置后,用户的业务vLAN配置不要和保留vLAN配置有重叠。

考题 单选题Refer to the exhibit. Which statement is true about a voice VLAN?()A  Physically the voice network and the data network are separate.B  The voice traffic will normally be on a different IP subnet than will the data traffic.C  End user intervention is necessary to place the phone into the proper VLAN.D  The same security policy should be implemented for both voice and data traffic.E  The data VLAN must be configured as the native VLAN.

考题 单选题下面是一段关于交换机端口的配置,针对如下配置说法正确的是()port link-type hybrid port hybrid pvid vlan2port hybrid untagged vlan 2 port hybrid tagged vlan3A 该端口的默认VLAN是VLAN 2B port hybrid tagged vlan 3命令用来配置Hybrid类型接口所属的VLAN,这些VLAN的帧以Untagged方式通过接口C por thybrid untagged vlan 2命令用来配置Hybrid类型接口所属的VLAN,这些VLAN的帧以Tagged方式通过接口D 以上说法都正确

考题 多选题要想让S3026透传vlan100,必须要在S3026上配置哪些命令()。Avlan 100Bport link-type trunkCport trunk permit vlan 100Dport trunk pvid vlan 1

考题 单选题Refer to the exhibit. Which statement is true about a voice VLAN?()A Physically the voice network and the data network are separateB The voice traffic will normally be on a different IP subnet than will the data trafficC End user intervention is necessary to place the phone into the proper VLAND The same security policy should be implemented for both voice and data trafficE The data VLAN must be configured as the native VLAN

考题 多选题关于VLAN聚合,下面说法正确的是()A配置sub-VLAN的命令是在super VLAN视图下配置的BSuper VLAN的可配置范围为1~4094C配置Super VLAN时,配置的VLAN必须没有加入任何端口D配置Super VLAN的命令是aggregate-vlan

考题 单选题Which statement is true about voice VLANs? ()A When the voice VLAN feature is enabled, all untagged voice and data traffic is sent through the voice VLAN.B The voice VLAN feature is enabled by default.C The IP phone overrides the priority of all incoming data traffic (tagged and untagged) and sets the CoS value to 0.D The default CoS value is 1 for incoming voice and data traffic.