单选题VLAN maps have been configured on switch R1. Which of the following actions are taken in a VLAN map that does not contain a match clause？（）A Implicit deny feature at end of list.B Implicit deny feature at start of list.C Implicit forward feature at end of listD Implicit forward feature at start of list.

考题 A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. None of the above

查看答案

考题 The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?（）A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.

查看答案

考题 What is valid reason for a switch to deny port access to new devices when port security is enabled?() A. The denied MAC addresses have already been learned or confgured on another secure interface in the same VLAN.B. The denied MAC address are statically configured on the port.C. The minimum MAC threshold has been reached.D. The absolute aging times for the denied MAC addresses have expired.

查看答案

考题 Which three statements about VTP features are true?() A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB.Each broadcast domain on a switch can have its own unique VTP domainC.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E.VTP pruning is used to increase available bandwidth in trunk linksF.Client,server,and transparent are valid VTP modesG. To configure a switch to be part of two VTP domains,each domain must have its own passwords

查看答案

考题 VLAN maps have been configured on switch R1. Which of the following actions are taken in a VLAN map that does not contain a match clause？（）A、 Implicit deny feature at end of list.B、 Implicit deny feature at start of list.C、 Implicit forward feature at end of listD、 Implicit forward feature at start of list.

查看答案

考题 A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.B、For the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.C、Direct inter-vlan communication does not require OSPFD、OSPF cannot be used if router-on-a-stick is configured on the router

查看答案

考题 Which three statements are typical characteristics of VLAN arrangements?（）A、A new switch has no VLANs configured.B、Connectivity between VLANs requires a Layer 3 device.C、VLANs typically decrease the number of collision domains.D、Each VLAN uses a separate address space.E、A switch maintains a separate bridging table for each VLAN.F、VLANs cannot span multiple switches.

查看答案

考题 Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? （）A、All ports will be in a state of discarding, learning, or forwarding.B、Thirty VLANs have been configured on this switch.C、The bridge priority is lower than the default value for spanning tree.D、All interfaces that are shown are on shared media.E、All designated ports are in a forwarding state.F、The switch must be the root bridge for all VLANs on this switch.

查看答案

考题 VTP is configured on switch R1. Which of the following features were added in VTP version 2 that were not previously supported in VTP version 1？（）A、Supports Token Ring VLANs.B、Allows VLAN consistency checks.C、Saves VLAN configuration memory.D、Reduces the amount of configuration necessary.E、Allows active redundant links when used with spanning tree.

查看答案

考题 An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？（）A、The switch must be configured with an IP address,subnet mask,and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch port.F、The switch must be fully configured as an SNMP agent.

查看答案

考题 An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）A、The switch that will share its VLAN configuration must be in VTP server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be connected over VLAN trunks.E、The switches must be configured to use the same STP version.F、The switches must have VTP pruning activated.

查看答案

考题 You have just created a new VLAN on your network. What is one step that you should include in your VLAN-based implementation and verification plan？（）A、Verify that trunked links are configured to allow the VLAN traffic.B、Verify that the switch is configured to allow for trunking on the switch ports.C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.D、Verify that different native VLANs exist between two switches for security purposes.

查看答案

考题 Which statement best describes what is depicted in the show command output？（）A、 IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.B、 The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.C、 IGMP snooping has been disabled on the VLAN 120 SVI.D、 IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.E、 IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.

查看答案

考题 What is valid reason for a switch to deny port access to new devices when port security is enabled?（）A、The denied MAC addresses have already been learned or confgured on another secure interface in the same VLAN.B、The denied MAC address are statically configured on the port.C、The minimum MAC threshold has been reached.D、The absolute aging times for the denied MAC addresses have expired.

查看答案

考题 An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）A、The switch must be configured with an IP address, subnet mask, and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch

查看答案

考题 A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.

查看答案

考题 A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）A、oneB、threeC、twoD、zero

查看答案

考题 Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）A、Reverse ARPB、Full duplex on the fiber linkC、PoED、802.1q trunking

查看答案

考题多选题An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）AThe switch that will share its VLAN configuration must be in VTP server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be connected over VLAN trunks.EThe switches must be configured to use the same STP version.FThe switches must have VTP pruning activated.

查看答案

考题多选题You have configured voice VLANs on Catalyst switch R1. Which two statements are true about the operation of voice VLANs on this device？（）AWhen the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port.BEnabling voice VLANs enables the switch to create multiple queues for traffic that is entering a port.CWhen voice VLANs are configured on a trunk link， UplinkFast must also be enabled.DVoice VLANs are configured to enable the switch to forward frames marked with the proper CoS values over separate physical links.EEnabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.

查看答案

考题多选题A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）AThe switch that will share the VLAN information must be in the VTP Server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be configured to use the same VTP version.EThe switches must be configured to use the same STP version.FThe switches must be configured to use the same type of ID tagging.GThe switches must be connected over VLAN trunks.

查看答案

考题单选题VLAN maps have been configured on switch R1. Which of the following actions are taken in a VLAN map that does not contain a match clause？（）A Implicit deny feature at end of list.B Implicit deny feature at start of list.C Implicit forward feature at end of listD Implicit forward feature at start of list.

查看答案

考题多选题Which three statements about VTP features are true?（）AWhen properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesBEach broadcast domain on a switch can have its own unique VTP domainCVTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.DWhen properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.EVTP pruning is used to increase available bandwidth in trunk linksFClient,server,and transparent are valid VTP modesGTo configure a switch to be part of two VTP domains,each domain must have its own passwords

查看答案

考题单选题You have just created a new VLAN on your network for inter-VLAN routing. What is one step that you should include in your VLAN-based implementation and verification plan？（）A Verify that different native VLANs exist between two switches for security purposes.B Verify that the switch is configured to allow for trunking on the switch ports.C Verify that each switch port has the proper IP address space assigned to it for the new VLAN. D Verify that the VLAN virtual interface has been correctly created and enabled.

查看答案

考题多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？（）AThe switch must be configured with an IP address,subnet mask,and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch port.FThe switch must be fully configured as an SNMP agent.

查看答案

考题单选题Which statement best describes what is depicted in the show command output？（）A IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.B The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.C IGMP snooping has been disabled on the VLAN 120 SVI.D IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.E IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.

查看答案

考题多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）AThe switch must be configured with an IP address, subnet mask, and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch

查看答案

考题单选题A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）A For the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.B For the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.C Direct inter-vlan communication does not require OSPFD OSPF cannot be used if router-on-a-stick is configured on the router

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：