网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
多选题
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）
A
The switch that will share the VLAN information must be in the VTP Server mode.
B
The switches must be in the same VTP domain.
C
The switch that will share the VLAN information must be configured as the root bridge.
D
The switches must be configured to use the same VTP version.
E
The switches must be configured to use the same STP version.
F
The switches must be configured to use the same type of ID tagging.
G
The switches must be connected over VLAN trunks.
参考答案
参考解析
解析：
暂无解析
更多 “多选题A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）AThe switch that will share the VLAN information must be in the VTP Server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be configured to use the same VTP version.EThe switches must be configured to use the same STP version.FThe switches must be configured to use the same type of ID tagging.GThe switches must be connected over VLAN trunks.” 相关考题
考题
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above
考题
A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.
考题
A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch.Which of the following settings on the switch will need to be configured to support the printer?（）A. MAC filteringB. IP addressC. PoED. Port speed
考题
An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）A. Straight-through cable is used to connect both switchesB. Loopback plug is connectedC. Crossover cable is used to connect both switchesD. Cable is a rollover cable
考题
Refer to Topic TestKing.com in iPAD document.Which switch is the root bridge for VLAN 1?()
A.TestKingDB.TestKing1C.TestKing2D.TestKing3
考题
A new asynchronous connection is being installed in your network. Which pair of WAN encapsulations types is suitable for asynchronous lines?()
A. PPP and ATMB. PPP and SDLCC. ATM and HDLCD. SDLC and HDLC
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()
A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure it to be installed in a high availability network. On a 3560 EMI switch， which three types of interfaces can be used to configure HSRP？（）A、 SVI interfaceB、 Access portC、 EtherChannel port channelD、 Loopback interfaceE、 Routed portF、 BVI interface
考题
You have just created a new VLAN on your network. What is one step that you should include in your VLAN-based implementation and verification plan？ （）A、Verify that trunked links are configured to allow the VLAN traffic.B、Verify that the switch is configured to allow for trunking on the switch ports.C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.D、Verify that different native VLANs exist between two switches for security purposes.
考题
You need to configure a new Cisco router to be installed in the VOIP network. Which threeinterface commands will configure the switch port to support a connected Cisco phone and to trustthe CoS values received on the port if CDP discovers that a Cisco phone is attached？（）A、switchport voice vlan vlan-idB、mls qos trust device cisco-phoneC、switchport priority extend cos_valueD、mls qos trust cosE、mls qos trust override cos
考题
You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）A、The TESTKING VLAN must be created.B、The desired ports must be added to the new TESTKING VLAN.C、The TESTKING VLAN must be added to all of the domains.D、The TESTKING VLAN must be named.E、An IP address must be configured for the TESTKING VLAN.F、None of the above. VLAN creations are automatic.
考题
Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.B、As a VTP server， the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
考题
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.
考题
You need to configure a new Cisco router to be installed in the Company VOIP network. Which three interface commands will configure the switch port to support a connected Cisco phone and to trust the CoS values received on the port if CDP discovers that a Cisco phone is attached？ （）A、switchport voice vlan vlan-idB、mls qos trust device cisco-phoneC、switchport priority extend cos_valueD、mls qos trust cosE、mls qos trust override cos
考题
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）A、The switch name must match the workgroup name of the local network.B、The switch must be configured with an IP address and default gateway.C、The remote workstations must have access to the management VLAN of the switch.D、CDP must be enabled on the switch so that it can be located by other devices on the network.
考题
A user is unable to connect to the network. A network technician is able to determine that there is a problem on the switch. All other users on that switch are able to connect successfully to the network. Which of the following is a probable cause？（）A、Switching loop is occurring on the switch.B、Wrong subnet mask on the switch.C、Incorrect SNMP settings on the switch.D、Port is misconfigured on the switch.
考题
A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?（）A、The voltage selector switch on the power supply is set incorrectly.B、The 3.3v power line is connected to the wrong input on the motherboard.C、The new power supply voltage rating is too high.D、The 12v power cord is installed incorrectly.
考题
An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）A、Straight-through cable is used to connect both switchesB、Loopback plug is connectedC、Crossover cable is used to connect both switchesD、Cable is a rollover cable
考题
多选题You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）AThe switch name must match the workgroup name of the local network.BThe switch must be configured with an IP address and default gateway.CThe remote workstations must have access to the management VLAN of the switch.DCDP must be enabled on the switch so that it can be located by other devices on the network.
考题
单选题You are the network administrator for TestKing.com. All network servers run Windows Server 2003. The network includes a file server named Testking1. Testking1 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. Testking1 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintenance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to function. What should you do?（）A
Name the new server Testking1. Create a new mirrored volume by using two 72-GB disks. Connect Testking2 to the network and copy the data from Testking1. When copying is complete, shut down the old Testking1.B
Name the new server Testking1. Move both disks from the old Testking1 to the new Testking1. Scan the disks for changes. Import the disks.Connect the new Testking1 to the network.C
Name the new server Testking1. Break the mirror on the old Testking1. Move one of the disks from the old Testking1 to the new Testking1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new Testking1 to the network.D
Name the new server Testking1. Remove one of the disks in the mirror from the old Testking1. Move the disk on the new Testking1. Scan the disk for changes. Import the disk, Shut down the old Testking1 and connect the new Testking1 to the network.
考题
单选题A new asynchronous connection is being installed in your network. Which pair of WAN encapsulations types is suitable for asynchronous lines?（）A
PPP and ATMB
PPP and SDLCC
ATM and HDLCD
SDLC and HDLC
考题
单选题You are the network administrator for . You are the administrator of a Windows Server 2003 computer named TestKing8. You log on to TestKing8 and attempt to access the network. You discover that the server is not communicationg on the network. You discover that a service pack and an updated network adapter driver were installed on TestKing8 the previous night. A complete backup, including the System State data, was performed before the service pack and the driver were installed. You need to restore network communications. What should you do first?（）A
Use Roll Back Driver to reinstall the previous driver for the network adapter.B
Use the Backp or Restore Wizard to restore the backup from the previous night.C
Restart TestKing8 by using Last Known Good Configuration option.D
Use the Registry Editor to delete the registry settings for the network adapter driver.
考题
单选题A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?（）A
The voltage selector switch on the power supply is set incorrectly.B
The 3.3v power line is connected to the wrong input on the motherboard.C
The new power supply voltage rating is too high.D
The 12v power cord is installed incorrectly.
考题
单选题A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）A
MAC filteringB
IP addressC
PoED
Port speed
考题
多选题You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure it to be installed in a high availability network. On a 3560 EMI switch， which three types of interfaces can be used to configure HSRP？（）ASVI interfaceBAccess portCEtherChannel port channelDLoopback interfaceERouted portFBVI interface
考题
单选题You are the administrator of a Windows Server 2003 computer named TestKing3. TestKing3 has Terminal Services installed. TestKing3 connects to the Internet through a proxy server on the company network. Help desk employees periodically access custom web applications on the company network. You install IIS on TestKing3 with all the default settings. You need to ensure that help desk employees can access Terminal Services on TestKing3 from Internet Explorer 6.0. What should you do?（）A
Uninstall IIS and Terminal Services. Reinstall IIS, and then reinstall Terminal Services.B
Configure the Internet Connection Firewall (ICF) to allow incoming ports 80 and 3389.C
Create a new virtual directory named Tsweb.D
Create a new web site named Tsweb.E
Install Remote Desktop Web Connection
考题
单选题You are the network administrator for . All network servers run Windows Server 2003. The network includes a file server named TestKing17. TestKing17 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. TestKing17 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintainance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to functions. What should you do?（）A
Name the new server TestKing20. Create a new mirrored volume by using two 72-GB disks. Connect TestKing20 to the network and copy the data from TestKing17. When copying is complete, shut down the old TestKing17.B
Name the new server TestKing17. Move both disks from the old TestKing17 to the new TestKing17. Scan the disks for changes.Connect the new TestKing17 to the network.C
Name the new server TestKing17. Break the mirror on the old TestKing17. Move one of the disks from the old TestKing17 to the new TestKing17. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new TestKing17 to the network.D
Name the new server TestKing17. Remove one of the disks in the mirror from the old TestKing17. Move the disk to the new TestKing17. Scan the disk for changes. Import the disk. Shut down the old TestKing17 and connect the new TestKing17 to the network.
热门标签
最新试卷
