网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）
A
MAC filtering
B
IP address
C
PoE
D
Port speed
参考答案
参考解析
解析：
暂无解析
更多 “单选题A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）A MAC filteringB IP addressC PoED Port speed” 相关考题
考题
A technician is installing a new power supply into a computer. One of the power supply connectors that the technician needs to connect to the motherboard is square and contains 4-pins. This connector is known as which of the following?（）A.SATAB.FDDC.IDED.ATX
考题
The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?（）A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.
考题
The network technician is troubleshooting a network issue by implementing a new security device.After installing and configuring the device, which of the following steps should the technician takeNEXT?（）A. Verity full system functionalityB. Identify the main problem and question the userC. Document their findings, actions, and outcomesD. Escalate the issue to upper management
考题
A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch.Which of the following settings on the switch will need to be configured to support the printer?（）A. MAC filteringB. IP addressC. PoED. Port speed
考题
When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?()
A. Before inserting the PCIe network card in the caseB. After inserting the new PCIe network card in the caseC. They will be automatically loaded after installationD. Load them concurrently with the PCIe network card
考题
You are installing a cisco 4402 series wireless lan controller. What type of interface is used on the uplink port？（）A、1000base-x mini-gbicB、10/100/1000 mbps rj45C、10/100 mbps rj45D、1000base-sx
考题
The network technician is troubleshooting a network issue by implementing a new security device.After installing and configuring the device, which of the following steps should the technician takeNEXT?（）A、Verity full system functionalityB、Identify the main problem and question the userC、Document their findings, actions, and outcomesD、Escalate the issue to upper management
考题
Before installing a new device， a technician checks to make sure the device is on the HCL. Which of the following is the advantage of having an HCL device？（）A、It is supported by other vendorsB、Increases performanceC、Decreases costD、Meets vendor standards
考题
You are installing a Cisco 4402 Series Wireless LAN Controller. Which type of interface should you use onthe controller’s distribution port？（）A、10/100 Mbps RJ45B、1000BASE-SX SFPC、10/100/1000 Mbps RJ45D、10000BASE-SX
考题
You are installing a cisco 4402 series wireless lan controller. Which type of interface should you use on the controller’s distribution port？（）A、1000base-sx sfpB、10/100/1000 mbps rj45C、10/100 mbps rj45D、10000base-sx
考题
Which action increases server availability？（）A、 configuring a second network card with a different IP addressB、 replacing the existing 100 Mbps NIC with a gigabit Ethernet NICC、 using adapter teaming and configuring the second network card with the same IP address as the first network cardD、 installing a dual-port network card that can handle the future growth and setting one NIC to 10 Mbps and one NIC to 100 Mbps
考题
A technician is installing a new power supply into a computer. One of the power supply connectors that the technician needs to connect to the motherboard is square and contains 4-pins. This connector is known as which of the following?（）A、SATAB、FDDC、IDED、ATX
考题
A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）A、Memory and virtual memory compatibilityB、Memory and speed compatibilityC、Memory and HDD compatibilityD、ESD standards were followed
考题
A technician is working on a SOHO wireless network and notices that the wireless adaptor in the laptop shows excellent connection at 11Mbps. The technician has a wireless N adaptor. Which of the following would BEST describe this connection speed?（）A、The laptop is too far away from the WAP.B、The WAP is using 802.11a frequencies.C、The laptop is only set to allow 802.11n connections.D、The technician is on an 802.11b network.
考题
A technician is installing a basic router for a SOHO network. After installing the router the PCs connected to it are not able to acquire an IP address. Which of the following did the technician fail to configure correctly？（）A、DHCPB、DNSC、WINSD、NAT
考题
A technician installed a new wireless access point on an existing small office home office (SOHO) network with a selective security option enabled. All wireless computers connect to the new network except one computer that cannot connect to the wireless network. Which of the following is the cause?（）A、The network uses MAC filteringB、The network uses WEPC、The network uses SSID broadcastD、The network uses WPA
考题
When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?（）A、Before inserting the PCIe network card in the caseB、After inserting the new PCIe network card in the caseC、They will be automatically loaded after installationD、Load them concurrently with the PCIe network card
考题
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
考题
You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other. What should you do?（）A、Configure the 10/100 switch to transfer only at the 100 MBPS rate.B、Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.C、Change the combination network adapter card to use the BNC transceiver setting.D、Change the combination network adapter card to use the UTP transceiver setting.
考题
You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Company uses NWLink as the only network protocol.You want to enable the computers to communicate at 100 Mbps.What should you do？（）A、Replace the network adapters with 10/100 Mbps network adapters. B、Enable TCP/IP on all of the computers on the network.C、Configure the NWLink frame type of the network adapters to be Ethernet II. D、Configure the NWLink frame type of the network adapters to be Ethernet 802.3.
考题
You have a 10Mbps network card in your computer. You install a 100Mbps network card on your computer and restart the computer. The 100Mbps card in not working due to a conflict with the10Mbps card. You want only the 100Mbps card to be active. What should you do to disable the10 Mbps network adapter？（）A、Remove the 100MB Ethernet adapter driver by using device manager.B、Remove the drivers for both Ethernet adapters cards by using device manager. C、Install the 100MB Ethernet adapter in different PC card slots.D、Disable the device drivers for the 10Mb card using by using Device Manager.
考题
Which of the following should be done FIRST when setting up a new p5-520 to be managed by a new HMC via a private network？（）A、Change passwords in ASMIB、Add the managed system to the HMCC、Connect the p5-520 to a power sourceD、Connect the HMC and the p5-520 server’s HMC1 port to the same network
考题
单选题A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）A
Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management proceduresB
Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking informationC
Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）D
Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams
考题
单选题Which action increases server availability？（）A
configuring a second network card with a different IP addressB
replacing the existing 100 Mbps NIC with a gigabit Ethernet NICC
using adapter teaming and configuring the second network card with the same IP address as the first network cardD
installing a dual-port network card that can handle the future growth and setting one NIC to 10 Mbps and one NIC to 100 Mbps
考题
单选题When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?（）A
Before inserting the PCIe network card in the caseB
After inserting the new PCIe network card in the caseC
They will be automatically loaded after installationD
Load them concurrently with the PCIe network card
考题
单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A
Configure a different TCP/IP addressB
Enable DHCP in the TCP/IP propertiesC
Enable DNS in the TCP/IP propertiesD
Configure the network adapter to run at 100 Mbps onlyE
Replace the network adapter.
考题
单选题You are installing a cisco 4402 series wireless lan controller. Which type of interface should you use on the controller’s distribution port？（）A
1000base-sx sfpB
10/100/1000 mbps rj45C
10/100 mbps rj45D
10000base-sx
热门标签
最新试卷
