网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
要使得Quidway交换机正常运行IGMP,下列配置命令中哪些命令是必需的()。
A.[Quidway-interface-vlan1]pim dm;
B.[Quidway-interface-vlan1]igmp enable;
C.[Quidway-interface-vlan1]igmp version 2;
D.[Quidway]multicast routing-enable。
参考答案
更多 “ 要使得Quidway交换机正常运行IGMP,下列配置命令中哪些命令是必需的()。 A.[Quidway-interface-vlan1]pim dm;B.[Quidway-interface-vlan1]igmp enable;C.[Quidway-interface-vlan1]igmp version 2;D.[Quidway]multicast routing-enable。 ” 相关考题
考题
在一个只有二层交换机构成的局域网中,如果在交换机上只启用IGMP Snooping,那么()。
A.组播不通B.组播正常，但IGMP Snooping无法正确记录成员端口信息C.组播正常，IGMP Snooping也可以正确记录组播成员端口信息D.如果同时启用IGMP Spoofing，可以使IGMP Snooping正常工作
考题
在Quidway中低端交换机上,要开启所有端口的STP功能,所用的命令是()。
A.[Quidway]stp enableB.[Quidway]stp enable allC.[Quidway-Ethernet0/1]stp enableD.[Quidway-Ethernet0/1]stp enable all
考题
下面关于配置IGMP时间参数配置命令的解释正确的有()。
A.igmp timer query seconds命令用于设置交换机发送查询报文的时间间隔B.igmp timer query seconds命令用于设置交换机发送查询报文中的最大响应时间C.igmp max-response-time seconds命令用于设置交换机发送查询报文中的最大响应时间D.igmp timer other-querier-present seconds命令用于设置交换机监听查询器存在的超时时间
考题
对于既支持IGMP同时也支持IGMP snooping的Quidway交换机,下列关于二者配置描述正确的有()。
A.[Quidway-interface-vlan1]igmp enable用于使能IGMP协议;B.[Quidway-vlan1]igmp enable用于使能IGMP协议;C.[Quidway-interface-vlan1]igmp-snooping enable用于使能IGMP snooping;D.[Quidway]igmp-snooping enable用于使能IGMP snooping。
考题
在Quidway系列交换机上开启PIM－SM,其关键配置命令(以VLAN10为例)正确的有()。
A.启动组播路由协议：[Quidway]multicast routing-enableB.在每个VLAN虚接口上配置PIM-SM：[Quidway]pim sm vlan-interface 10C.配置候选BSR：[Quidway-pim]c-bsrvlan-interface 10 24 2D.配置候选RP：[Quidway-pim]c-rpvlan-interface 10
考题
Refer to the exhibit. Which two conclusions can be drawn from the debug ip igmp output?()
A. The router sent an IGMP version 2 query out interface Ethernet1 at multicast address 224.0.0.1.B. Router RTA received an IGMP report version 1 from host 192.168.9.1.C. Reverse Path Forwarding (RPF) is ena bled for 192.168.9.4.D. Reverse Path Forwarding (RPF) is enabled for 224.0.1.40.E. The IP multicast groups are 224.0.0.1, 224.0.1.40, and 239.255.0.1.F. IP PIM RP mapping is static.
考题
Which two statements are true about Internet Group Management Protocol (IGMP) snooping?()
A. IGMP snooping and Cisco Group Membership Protocol (CGMP) can be used simultaneously on a switch.B. IGMP snooping a nd Cisco Group Membership Protocol (CGMP) were developed to help Layer 3 switches make intelligent forwarding decisions on their own.C. IGMP snooping examines IGMP join/leave messages so that multicast traffic is forwarded only to hosts that sent an IG MP message toward the router.D. IGMP snooping is an IP multicast constraining mechanism for Layer 2 switches.E. IGMP snooping is enabled with the ip multicast - routing global configuration command.
考题
Which three statements are true about the Internet Group Management Protocol (IGMP)? ()
A. There are three IGMP modes: dense mode, sparse mode, and sparse - dense modeB. IGMP is used to register individual hosts with a multicast groupC. IGMP version 3 enables a multicast receiving host to specify to the router which sources it should forward traffic fromD. IGMP messages a re IP datagrams with a protocol value of 2, destination address of 224.0.0.2, and a TTL value of 1E. IGMP is a multicast routing protocol that makes packet - forwarding decisions independent of other routing protocols such as EIGRPF. IGMP snooping ru ns on Layer 3 routers
考题
When building an IP multicast domain using PIM which mode assumes that other routers do not want to forward multicast packets for the group?()
A. PIM - DMB. PIM - SMC. PIM - RPD. CGMPE. IGMP snooping
考题
在Quidway S3526交换机上,使用下列哪一条命令可以显示IGMP接口信息()
A. [Quidway]display ip igmp interfaceB. Quidwaydisplay ip igmp interfaceC. Quidwaydisplay ip igmpD. [Quidway]display igmp interface
考题
在Quidway S3526交换机上启用组播应用的命令是什么()
A. [Quidway]ip multicast routingB. [Quidway]multicast routing-enableC. [Quidway-Vlan-interface2]multicast routing-enableD. [Quidway-Vlan-interface2]ip multicast routing
考题
路由器某接口,要将此接口配置为区域2,下列命令正确的是()
A.[Quidway-Serial0] ospf enable area 2B.[Quidway-Ethernet0]ospf enable area 2C.[Quidway-Serial0]ospf en area 2D.[Quidway]ospf enable area 2
考题
下面给出的RTA的配置,关于配置描述错误的是?()
A.multicast routing-enable该命令为使能组播功能，如若不配置该命令，则路由器不转发组播报文B.Igmp enable命令用来在接口上使能IGMP。如果不先配置multicast routing-enable命令，igmp enable也可以照常使用C.该接口所支持的IGMP版本为版本2，如果不配置该命令，则接口缺省运行IGMPV1D.该路由器默认监听组播地址224.0.0.2
考题
如果IGMP snooping工作机制描述正确的是()
A.如果主机发出IGMP离开报文时，交换机将改主机加入到相应的组播表中B.如果主机发出的IGMP主机报告报文时，交换机将删除与该主机对应的组播表项C.二层交换机通过不断监听IGMP报文，交换机在二层建立和维护MAC广播地址表D.没有运行IGMP Snooping时，组播报文将在二层广播，运行IGMP Snooping后，报文将不再二层广播，而是进行二层组播
考题
IGMP协议和IGMP Snoo ping的区别是（）。A、IGMP协议运行在网络层，IGMP Snoo ping运行在链路层B、IGMP协议运行在链路层，IGMP Snoo ping运行在网络层C、IGMP运行在主机和组播路由器之间，用于跟踪、了解主机是哪些组播组的成员D、IGMP Snoo ping工作在二层交换机中，用于将组播报文在二层上进行有目的性转发
考题
在Quidway交换机上，要开启所有端口的STP功能，所用的命令是（）A、[Quidway]stp enableB、[Quidway]stp enable allC、[Quidway-Ethernet0/1]stp enableD、[Quidway-Ethernet0/1]stp enable all
考题
Which three statements are true about the Internet Group Management Protocol (IGMP)? （）A、There are three IGMP modes: dense mode, sparse mode, and sparse - dense modeB、IGMP is used to register individual hosts with a multicast groupC、IGMP version 3 enables a multicast receiving host to specify to the router which sources it should forward traffic fromD、IGMP messages a re IP datagrams with a protocol value of 2, destination address of 224.0.0.2, and a TTL value of 1E、IGMP is a multicast routing protocol that makes packet - forwarding decisions independent of other routing protocols such as EIGRPF、IGMP snooping ru ns on Layer 3 routers
考题
When building an IP multicast domain using PIM which mode assumes that other routers do not want to forward multicast packets for the group?（）A、PIM - DMB、PIM - SMC、PIM - RPD、CGMPE、IGMP snooping
考题
What is the minimum configuration you must do in order to enable multicast support on the CiscoWireless LAN Controller v5.2?（）A、Enable the IGMP snooping capability and define the IGMP timeout period.B、Set the Ethernet multicast mode to Enabled， enable the IGMP snooping capability， and define the IGMP timeout period.C、Set the multicast monitor function to Enabled， enable the IGMP snooping capability， and define the mandatory data rate to the minimum value supported.D、Set the Ethernet multicast mode to Multicast and define the multicast group address.
考题
In PIM-SM operations，to which device does the first router that connects with the multicast source sendthe register message？（）A、RPB、multicast sourceC、IGMP routerD、multicast receiverE、PIM designated router
考题
单选题在Quidway S3526交换机上，使用下列哪一条命令可以显示IGMP接口信息（）A
[Quidway]display ip igmp interfaceB
Quidwaydisplay ip igmp interfaceC
Quidwaydisplay ip igmpD
[Quidway]display igmp interface
考题
单选题What is the minimum configuration you must do in order to enable multicast support on the CiscoWireless LAN Controller v5.2?（）A
Enable the IGMP snooping capability and define the IGMP timeout period.B
Set the Ethernet multicast mode to Enabled， enable the IGMP snooping capability， and define the IGMP timeout period.C
Set the multicast monitor function to Enabled， enable the IGMP snooping capability， and define the mandatory data rate to the minimum value supported.D
Set the Ethernet multicast mode to Multicast and define the multicast group address.
考题
单选题在Quidway S3526交换机上启用组播应用的命令是什么（）A
[Quidway]ip multicast routingB
[Quidway]multicast routing-enableC
[Quidway-Vlan-interface2]multicast routing-enableD
[Quidway-Vlan-interface2]ip multicast routing
考题
单选题使用下列哪一条命令可以显示通过IGMP消息得知的，直连子网中组成员的情况？（）A
show ip igmp interfaceB
show ip igmp routeC
show ip igmp groupD
debug ip igmp
热门标签
最新试卷
