网友您好, 请在下方输入框内输入要搜索的题目:

题目内容 (请给出正确答案)
Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?()

A.set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0

B.set ip interface ge-0/0/0 address 192.168.1.1/24

C.set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0

D.set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24


参考答案

更多 “ Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?() A.set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0B.set ip interface ge-0/0/0 address 192.168.1.1/24C.set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0D.set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24 ” 相关考题
考题 假设已经使用命令ADDDEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=0,IP=10.11.1.3,MASK=255.255.255.0,在LMPT板的FE端口1上再配置一个IP地址,下列哪个命令可以使用?() A、ADDDEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=1,IP="10.11.1.4",MASK="255.255.255.0"B、ADDDEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=1,IP="10.11.1.5",MASK="255.255.255.0"C、ADDDEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=1,IP="10.11.2.6",MASK="255.255.255.0"D、ADDDEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=1,IP="10.11.1.6",MASK="255.255.255.0"

考题 WhichtypeofsourceNATisconfiguredintheexhibit?()[editsecuritynatsource]user@hostshowrule-set1{frominterfacege-0/0/2.0;tozoneuntrust;rule1A{match{destination-address1.1.70.0/24;}then{source-natinterface;}}}A.interface-basedsourceNATB.staticsourceNATC.pool-basedsourceNATwithPATD.pool-basedsourceNATwithoutPAT

考题 In which two ways can the router ID selection be controlled?() A. Manually assign rid.B. configure local-address.C. enable the fxp0 interface.D. Assign nonmartian address to lo0.

考题 在Linux系统中,使用ifconfig设置接口的IP地址并启动该接口的命令是( )。A.ifcorffig eth0 192.168.1.1 mask 255.255.255.0B.ifconfig 192.168.1.1 mask 255.255.255.0 upC.ifconfig eth0 192.168.1.1 mask 255.255.255.0 upD.ifconfig 192.168.1.1 255.255.255.0

考题 Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem?()A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0B.A second DHCP pool for network 10 .10.0.0/24 should be configuredC.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issuedD.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfigurationE.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration

考题 Asanetworkengineer,studytheexhibitcarefully.RouterNetisunabletoestablishanADSLconnectionwithitsprovider.Whichactionwouldcorrectthisproblem?() A.OntheDialer0interface,addthepppoeenablecommandB.OntheDialer0Interface,addtheipmtu1496commandC.OntheATM0/0interface,addthedialerpool-member1commandD.OntheATM0/0interface,addthedialerpool-member0command

考题 ABGProuterisconfiguredasshownbelow:interfaceethernet0ipaddress10.10.10.1255.255.0.0!intserial0ipaddress172.16.1.1255.255.255.252!routerbgp65001neighbor192.168.1.1remote-as65002Basedontheaboveconfiguration,whichofthefollowingBGPstatementswouldinjectthe10.10.0.0/16prefixintotheBGProutingtable?()A.network10.0.0.0B.network10.10.0.0mask255.255.0.0C.network10.10.10.1mask255.255.255.255D.network10.10.10.0mask255.255.255.0E.network10.0.0.0mask255.255.0.0

考题 RTA使用Ethernet0/0接口连接到一个局域网,端口IP地址为10.1.1.251,网络掩码为255.255.255.0。要求在RTA上创建一个虚拟路由器,ID为1,虚拟IP地址为10.1.1.254,以下命令正确的是:() A.[RTA-Ethernet0/0]vrrpvrid1virtual-ip10.1.1.254B.[RTA]vrrpvrid1virtual-ip10.1.1.254C.[RTA-Ethernet0/0]vrrpvrid1virtual-ip10.1.1.254mask255.255.255.0D.[RTA]vrrpvrid1virtual-ip10.1.1.254mask255.255.255.0

考题 在CISCO设备中,以下哪个命令可以配置接口F0/0的IP地址为192.168.1.1/24A.ip address 192.168.1.1 255.255.255.0B.ip 192.168.1.1 netmask 255.255.255.0C.ip address 192.168.1.1 24D.ip address 192.168.1.0 255.255.255.0