网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）
A
One per node
B
Only one
C
Two in the primary node
D
None
参考答案
参考解析
解析：
暂无解析
更多 “单选题In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）A One per nodeB Only oneC Two in the primary nodeD None” 相关考题
考题
You have a print server named Server1 that runs Windows Server 2003 Service Pack (SP2). Server1 isconfigured as shown in the following table.All the hard disks are 136 GB and are connected to a SCSI controller.You need to identify which disk configuration will provide the best performance for printing.Which disk configuration should you implement? （）A. one RAID-0 volumeB. one RAID-1 volumeC. one RAID-5 volumeD. two RAID-1 volumes
考题
An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the likely reason why this is occurring?（）A. The disks have been setup as basic.B. The page file must be at least 4GB to support mirrored drives.C. The disks have been setup as dynamic.D. Windows does not support software RAID 1.
考题
A high availability solution must be designed for a single file server. Data must be replicated between the disks to ensure a failure of one disk does not bring down the server. Which of thefollowing meets these requirements？（）A、RAID 1B、RAID 0C、Active/passive clusterD、Disk-to-disk
考题
Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0. What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure？（） A、 One adapter per nodeB、 Two adapters per nodeC、 Four adapters per nodeD、 No additional adapters per node
考题
You want to create a template to be used as a standard for all company reports, which are many different styles. How many different templates must you have if you plan to use multiple report styles?（）A、Two B、One C、One per report styleD、One per report style + one more
考题
In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）A、One per nodeB、Only oneC、Two in the primary nodeD、None
考题
On an existing two-node cluster， the system is configured with RAID5 SSA as the shared disk. When adding a new node to the cluster， what must be taken into consideration？（） A、 Nothing，SSA can support a maximum of 8 initiators per loop.B、 The RAID5 implementation on SSA will only support two initiators per loop.C、 SSA can only support four initiators per lop when using the fat write option.D、 The RAID implementation can be used with three initiators only if the fast write cache option is used on all adapters.
考题
How many VLANs on the UCS must be configured when using FCoE?（）A、One per bladeB、One per VSANC、One per fabricD、None are required
考题
During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable. To facilitate disk heartbeating，how many disks per node and how many networks will be required？（） A、 One disk per node，one networkB、 Two disks per node，one networkC、 Two disks per node，six networksD、 Two disks per node，three networks
考题
A customer has an xSeries x445 server attached to a DS4500 storage server containing two EXP710 disk expansion drawers with 14 disks in each. The x445 is to be used for a video streaming application. The customer wants to make the most cost-effective use of the disk capacity while retaining fault tolerance. Which of the following solutions will satisfy the requirements？（）A、Create two RAID-10e arrays， one per disk expansion drawerB、Create a single RAID-10 array across the two disk expansion drawersC、Create a single RAID-5 array across both disk drawers utilizing all disksD、Create four RAID-5 arrays in 6+P format with two arrays to each disk expansion drawer
考题
Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）A、Have one VIO server with striped disks for all LPARsB、Have one VIO server with mirrored disks for all LPARsC、Have two VIO servers with each LPAR accessing both VIO serversD、Have two VIO servers with each LPAR accessing a different VIO server
考题
The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）A、It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.B、It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.C、It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.D、It can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.
考题
Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time？（）A、 Shut down one node at a time and let the other node serve the applicationB、 Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMPC、 Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the clusterD、 Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC
考题
You are the network administrator for All network servers run Windows Server 2003. A server named TK1 contains a mirrored volume that consists of two 36-GB disks. Both disks are used for data storage. TK1 also contains a third unallocated dynamic disk. Next week, a database that currently requires 45 GB of disk space will be installed on TK1. This database will grow at a rate of 10 percent every 6 months. You need to realocate disk space on TK1. Your realocation must satisfy the space requirements of the new database, and it must also ensure that data will remain available in case of disk failure. First, you break the mirror and delete all volumes on the disks. What should you do next?（）A、Create a spanned volume.B、Create a stripped volume.C、Create a mirrored volume.D、Create a RAID-5 volume.
考题
You are the network administrator for TestKing. All network servers run Windows Server 2003. You administer a server named TestKing76. You need to configure TestKing76 to function as a streaming media server for TestKing.com's content team. The content team wants TestKing76 to provide the fastest performance and the most available space possible. Redundancy is not import. TestKing76 currently has three identical, unpartitioned hard disks available. You need to configure the disks to meet the content team's requirements. What should you do?（）A、Create a simple volume on disk and then expand it to the other two disks.B、Create a mirrored volume that uses two of the disks.C、Create a RAID-5 volume that uses all three disks.D、Create a striped volume that uses all three disks.
考题
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
考题
单选题During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable. To facilitate disk heartbeating，how many disks per node and how many networks will be required？（）A
One disk per node，one networkB
Two disks per node，one networkC
Two disks per node，six networksD
Two disks per node，three networks
考题
单选题On an existing two-node cluster， the system is configured with RAID5 SSA as the shared disk. When adding a new node to the cluster， what must be taken into consideration？（）A
Nothing，SSA can support a maximum of 8 initiators per loop.B
The RAID5 implementation on SSA will only support two initiators per loop.C
SSA can only support four initiators per lop when using the fat write option.D
The RAID implementation can be used with three initiators only if the fast write cache option is used on all adapters.
考题
单选题You are the network administrator for All network servers run Windows Server 2003. A server named TK1 contains a mirrored volume that consists of two 36-GB disks. Both disks are used for data storage. TK1 also contains a third unallocated dynamic disk. Next week, a database that currently requires 45 GB of disk space will be installed on TK1. This database will grow at a rate of 10 percent every 6 months. You need to realocate disk space on TK1. Your realocation must satisfy the space requirements of the new database, and it must also ensure that data will remain available in case of disk failure. First, you break the mirror and delete all volumes on the disks. What should you do next?（）A
Create a spanned volume.B
Create a stripped volume.C
Create a mirrored volume.D
Create a RAID-5 volume.
考题
单选题You are the network administrator for TestKing. All network servers run Windows Server 2003. You administer a server named TestKing76. You need to configure TestKing76 to function as a streaming media server for TestKing.com's content team. The content team wants TestKing76 to provide the fastest performance and the most available space possible. Redundancy is not import. TestKing76 currently has three identical, unpartitioned hard disks available. You need to configure the disks to meet the content team's requirements. What should you do?（）A
Create a simple volume on disk and then expand it to the other two disks.B
Create a mirrored volume that uses two of the disks.C
Create a RAID-5 volume that uses all three disks.D
Create a striped volume that uses all three disks.
考题
单选题A customer has an xSeries x445 server attached to a DS4500 storage server containing two EXP710 disk expansion drawers with 14 disks in each. The x445 is to be used for a video streaming application. The customer wants to make the most cost-effective use of the disk capacity while retaining fault tolerance. Which of the following solutions will satisfy the requirements？（）A
Create two RAID-10e arrays， one per disk expansion drawerB
Create a single RAID-10 array across the two disk expansion drawersC
Create a single RAID-5 array across both disk drawers utilizing all disksD
Create four RAID-5 arrays in 6+P format with two arrays to each disk expansion drawer
考题
单选题Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0. What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure？（）A
One adapter per nodeB
Two adapters per nodeC
Four adapters per nodeD
No additional adapters per node
考题
单选题In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）A
One per nodeB
Only oneC
Two in the primary nodeD
None
考题
单选题Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）A
Have one VIO server with striped disks for all LPARsB
Have one VIO server with mirrored disks for all LPARsC
Have two VIO servers with each LPAR accessing both VIO serversD
Have two VIO servers with each LPAR accessing a different VIO server
考题
单选题An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the likely reason why this is occurring?（）A
The disks have been setup as basic.B
The page file must be at least 4GB to support mirrored drives.C
The disks have been setup as dynamic.D
Windows does not support software RAID 1.
考题
单选题Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time？（）A
Shut down one node at a time and let the other node serve the applicationB
Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMPC
Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the clusterD
Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC
考题
单选题Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A
The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. B
The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. C
The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. D
The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
考题
单选题The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）A
It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.B
It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.C
It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.D
It can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.
热门标签
最新试卷
