网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
多选题
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）
A
Switch2 is configured for only VLAN1
B
Switch2 is a VTP server in a different domain
C
Switch2 is a VTP server in the Company domain
D
Switch2 is not a VTP domain.
E
Switch2 has a lower VTP configuration revision number than the current VTP revision
F
Switch2 has a higher VTP configuration revision number than the current VTP revision
参考答案
参考解析
解析：
暂无解析
更多 “多选题A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）ASwitch2 is configured for only VLAN1BSwitch2 is a VTP server in a different domainCSwitch2 is a VTP server in the Company domainDSwitch2 is not a VTP domain.ESwitch2 has a lower VTP configuration revision number than the current VTP revisionFSwitch2 has a higher VTP configuration revision number than the current VTP revision” 相关考题
考题
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above
考题
What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.
考题
What must an administrator do in order to successfully configure a VLAN trunk between two switches?()
A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()
A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?()
A. clientB. dynamicC. serverD. staticE. transparent
考题
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）A、Each end of the trunk line must be set to IEEE 802.1E encapsulation.B、The VTP management domain name of both switches must be set the same.C、All ports on both the switches must be set as access ports.D、One of the two switches must be configured as a VTP server.E、A rollover cable is required to connect the two switches together.F、A router must be used to forward VTP traffic between VLANs.
考题
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）A、Switch2 is configured for only VLAN1B、Switch2 is a VTP server in a different domainC、Switch2 is a VTP server in the Company domainD、Switch2 is not a VTP domain.E、Switch2 has a lower VTP configuration revision number than the current VTP revisionF、Switch2 has a higher VTP configuration revision number than the current VTP revision
考题
The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol （VTP）？（）A、VTP messages will not be forwarded over nontrunk links.B、VTP domain names need to be identical. However，case doesn’t matter.C、A VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.D、A device in "transparent" VTP v.1 mode will not forward VTP messages.E、VTP pruning allows switches to prune VLANs that do not have any active ports associated with them.
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
You have an Exchange Server 2010 organization that contains five Mailbox servers.Your Active Directory domain contains five domain controllers in a single site. You create a new mailbox database.You notice that the database fails to mount. You need to ensure that the database mounts as soon as possible. What should you do？（）A、Configure all domain controllers as Global Catalog servers.B、Install the Exchange Server 2010 Administration Tools on a domain controller.C、Force the replication of the Active Directory Domain partition between all domain controllers.D、Force the replication of the Active Directory Configuration partition between all domain controllers.
考题
Your network consists of a single Active Directory domain that has three Active Directory sites. Each site contains two Active Directory domain controllers. All domain controllers run Windows Server 2003 Service Pack 2 （SP2）. All domain controllers have Windows Support Tools installed. You need to verify the replication status of Active Directory. Which tool should you use？（）A、Active Directory Sites and ServicesB、Nltest.exeC、Network MonitorD、Replmon.exe
考题
What are two key characteristics of VTP？ （）A、VTP messages are sent out all switch-switch connections.B、VTP L2 messages are communicated to neighbors using CDP.C、VTP manages addition， deletion， and renaming of VLANs 1 to 4094.D、VTP pruning restricts flooded traffic， increasing available bandwidth.E、VTP V2 can only be used in a domain consisting of V2 capable switches.F、VTP V2 performs consistency checks on all sources of VLAN information.
考题
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）A、clientB、dynamicC、serverD、staticE、transparent
考题
Switch R1 is configured to use the VLAN Trunking Protocol （VTP）. What does R1 advertise in its VTP domain？（）A、The VLAN ID of all known VLANs，the management domain name，and the total number of trunk links on the switch.B、The VLAN ID of all known VLANs，a 1-bit canonical format （CF1 Indicator），and the switch configuration revision number.C、The management domain name，the switch configuration revision number，the known VLANs， and their specific parameters.D、A 2-byte TPID with a fixed value of 0x8100 for the management domain number，the switch configuration revision number，the known VLANs，and their specific parameters.E、None of the other alternatives apply.
考题
Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.B、As a VTP server， the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
考题
Switch R1 is part of the Company VTP domain. What’s true of VTP Pruning within this domain？（）A、It does not prune traffic from VLANs that are pruning-ineligibleB、VLAN 1 is always pruning-eligibleC、It will prune traffic from VLANs that are pruning-ineligibleD、VLAN 2 is always pruning-ineligibleE、None of the other alternatives apply
考题
You are designing the DNS topology to meet the business and technical requirements. Which DNS structure should you use？（）A、 one primary zoneB、 two primary zonesC、 one Active Directory-integrated zone that has the replication scope set to all DNS servers in the forest.D、 two Active Directory-integrated zones that have the replication scopes set to all DNS servers in the forest.E、 one Active Directory-integrated zone that has the replication scope set to all domain controllers in the domain.F、 two Active Directory-integrated zones that have the replication scopes set to all domain controllers in the domain.
考题
Your organization has 5 Mailbox servers and 5 Active directory servers.You need to install a new Mailbox server.During the installation you notice the mailbox database will not mount. What should you do to make sure you can install the mailbox server：（）A、Configure all domain controllers as Global Catalog Servers.B、Install the Exchange Server 2010 Administration Tools on a domain controller.C、Force the replication of the AD domain partition between all domain controllers.D、Force the replication of the AD configuration partition between all domain controllers.
考题
Certkiller .com has a network that consists of a single Active Directory domain. A technician has accidently deleted an Organizational unit （OU） on the domain controller. As an administrator of Certkiller .com， you are in process of restoring the OU. You need to execute a non-authoritative restore before an authoritative restore of the OU. Which backup should you use to perform non-authoritative restore of Active Directory Domain Services （AD DS） without disturbing other data stored on domain controller（）A、Critical volume backupB、Backup of all the volumesC、Backup of the volume that hosts Operating systemD、Backup of AD DS foldersE、all of the above
考题
单选题Switch R1 is configured to use the VLAN Trunking Protocol （VTP）. What does R1 advertise in its VTP domain？（）A
The VLAN ID of all known VLANs，the management domain name，and the total number of trunk links on the switch.B
The VLAN ID of all known VLANs，a 1-bit canonical format （CF1 Indicator），and the switch configuration revision number.C
The management domain name，the switch configuration revision number，the known VLANs， and their specific parameters.D
A 2-byte TPID with a fixed value of 0x8100 for the management domain number，the switch configuration revision number，the known VLANs，and their specific parameters.E
None of the other alternatives apply.
考题
单选题Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）A
clientB
dynamicC
serverD
staticE
transparent
考题
多选题In a customer’s network， VLAN Trunking Protocol （VTP） is running with a domain named main1. VLANs 1，2，3，4，5，10，20 are active on the network. Suddenly the whole network goes down. No traffic is being passed on VLANs 2，3，4，5，10，20， however traffic passes on VLAN 1 and indicates all switches are operational. Right before the network problem occurred， a switch named TEST1 was added to the network. What three configuration issues on TEST1 could be causing the network outage？（）ATEST1 is configured as a VTP server with a different domain name.BTEST1 is not configured to participate in VTP.CTEST1 is configured as a VTP server with the domain name main1.DTEST1 has a lower VTP configuration revision than the current VTP revision.ETEST1 has a higher VTP configuration revision than the current VTP revision.FTEST1 is configured with only VLAN1.
考题
单选题You are designing the DNS topology to meet the business and technical requirements. Which DNS structure should you use?（）A
one primary zoneB
two primary zones C
one Active Directory-integrated zone that has the replication scope set to all DNS servers in the forest.D
two Active Directory-integrated zones that have the replication scopes set to all DNS servers in the forest.E
one Active Directory-integrated zone that has the replication scope set to all domain controllers in the domain.F
two Active Directory-integrated zones that have the replication scopes set to all domain controllers in the domain.
考题
多选题What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）ASet each end of the trunk line to IEEE 802.1Q encapsulation.BSet the same VTP management domain name on both switches.CSet all ports on the two switched as access ports.DConfigure one of the two switches as a VTP server.EConnect the two switches using a rollover cable.FUse a router to forward VTP traffic between the VLANs.
考题
多选题A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）ASwitch2 is configured for only VLAN1BSwitch2 is a VTP server in a different domainCSwitch2 is a VTP server in the Company domainDSwitch2 is not a VTP domain.ESwitch2 has a lower VTP configuration revision number than the current VTP revisionFSwitch2 has a higher VTP configuration revision number than the current VTP revision
考题
单选题Certkiller .com has a network that consists of a single Active Directory domain. A technician has accidently deleted an Organizational unit （OU） on the domain controller. As an administrator of Certkiller .com， you are in process of restoring the OU. You need to execute a non-authoritative restore before an authoritative restore of the OU. Which backup should you use to perform non-authoritative restore of Active Directory Domain Services （AD DS） without disturbing other data stored on domain controller（）A
Critical volume backupB
Backup of all the volumesC
Backup of the volume that hosts Operating systemD
Backup of AD DS foldersE
all of the above
考题
单选题You are using VTP version 2 in your network to transport VLAN information between switches. When adding a switch to the network that has been used in the lab previously， you notice that a lot of the existingVLANs have been deleted or replaced with other names. What can you do to prevent this from happeningin the future， without losing all VTP features that you are using today？（）A
configure a hard-to-guess VTP domain nameB
use a hard-to-guess VTP passwordC
use VTP transparent modeD
implement VTP version 3
考题
多选题In the network， VLAN Trunking Protocol （VTP） is running with a domain name of R1. VLANs 1， 2，3， 4， 5， 10， 20 are active on the network. Suddenly the whole network goes down. No traffic isbeing passed on VLANs 2， 3， 4， 5， 10， 20. However， traffic passes on VLAN 1 and indicates allswitches are operational. Right before the network problem occurred； a switch named SW13 wastaken out of the lab and added to the network. What three configuration issues on SW13 could becausing the network outage？（）ASW13 has a higher VTP configuration revision than the current VTP revisionBSW13 is configured as a VTP server with a different domain nameCSW13 is configured as a VTP server with the domain name R1DSW13 has a lower VTP configuration revision than the current VTP revisionESW13 is not configured to participate in VTPFSW13 is configured with only VLAN1
热门标签
最新试卷
