网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
Study the Exhibit below carefully:
London#show vtp
VTP Version: 2
Configuration Revision: 0
Maximum VLANs supported locally: 64
Number of existing VLANs: 5
VTP Operating Mode: Client
VTP Domain Name: London
VTP Pruning Mode: Disabled
VTP V2 Mode: Disabled
VTP Traps Generation: Disabled
Based on the information given above, what is the VTP function of this particular switch?
A．Learn and save VTP configuration in the running configuration.
B．Create and change VLANs.
C．Forwards information about VTP configuration.
D．VTP is disabled on this device.
E．VTP is not saved to NVRAM.
参考答案
更多 “ Study the Exhibit below carefully:London#show vtpVTP Version: 2Configuration Revision: 0Maximum VLANs supported locally: 64Number of existing VLANs: 5VTP Operating Mode: ClientVTP Domain Name: LondonVTP Pruning Mode: DisabledVTP V2 Mode: DisabledVTP Traps Generation: DisabledBased on the information given above, what is the VTP function of this particular switch?A．Learn and save VTP configuration in the running configuration.B．Create and change VLANs.C．Forwards information about VTP configuration.D．VTP is disabled on this device.E．VTP is not saved to NVRAM. ” 相关考题
考题
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above
考题
交换机命令show interfaces type 0/port_#switchport|trunk用于显示中继连接的配置情况，下面是显示例子：2950# show interface fastEthernet 0/1 switchportName：fa 0/1Switchport： EnabledAdminiStratire mode：trunkOperational Mode：trunkAdminiStrotire Trunking Encapsulation：ctotlqOperational Trunking Encapsulation：dotlqegotiation of Trunking：DisabledAccess Mode VLAN：0 ((Inactire))Trunking Native Mode VLAN：1(default)Trunking VLANs Enabled：ALLTrunklng VLANs Actlve： 1，2Pruning VLANs Enabled：2-1001Priority for untagged frames：0Override vlan tag priority：FALSEVoice VLAN：nome在这个例子中，端口fa 0/1的链路模式被设置为 (56) 状态，默认的VLAN是 (57) 。（56）A．DesirableB．No-Negotiate]C．Auto negotiateD．trunk
考题
某局域网内交换机为VTP SERVER,VTP Domain Name:CISCO,Configuration Revision:4,下面哪台交换机可以同步到它的VTP配置()。
A.Mode：Transparent，Domain Name：CISCO，Configuration Revision：3B.Mode：Client，Domain Name：CISCO，Configuration Revision：3C.Mode：Client，Domain Name：CISCO，Configuration Revision：5D.Mode：Client，Domain Name：CISCO1，Configuration Revision：3
考题
阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。SW1＞enable (进入特权模式)SW1vlan database (进入VLAN配置子模式)SW1(vlan)vtp server (设置本交换机为Server模式)SW1(vlan)vtp domain (1) (设置域名)SW1(vlan) (2) (启动修剪功能)SW1(vlan)exit (退出VLAN配置模式)SW1show (3) (查看VTP设置信息)VTP Vetsion :2Configuration Revision :0Maximum VLANs supported locrlly :64Number of existing VLANs :1VTP Operating Mode :ServerVTP Domain Name :Server1VTP Pruning Mode :EnableVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan) (4)Setting device to VTP CLIENT mode.SW2(vlan)exit
考题
如下图所示，利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网，可以对各个子网实施不同的管理策略。阅读以下的配置信息，将 【6】 ～【10】 处空缺的内容填写在答题纸相应位置。SWlenable （进入特权模式）SWlvaln database （设置VLAN配置子模式）SWl(valn)vtp server （设置本交换机为Server模式）SWl(valn)vtp domain 【6】 （设置域名）SWl(valn) __【7】 （启动修剪功能）SWl(valn)exit （退出VLAN配置模式）SWlshow【8】 （查看VTP设置信息）VTP version:2ConfigurationRevision: 0Maximum VLANs supposedlocally: 64Number of existing VLANs: 1VTP Operating Mode: ServerVTP Domain Name: ServerlVTP Pruning Mode: EnableVTP V2 Mode：DisabledVTP Traps Generation: DisabledMD5 digest: Ox82 0x6B OxFB Ox94 0x41 0xEF Ox92 0x30Configuration last modified by 0.0.0.0 at 5-1-03 00: 06: 44SW2valn databaseSW2(valn)vtp domain NULLSW2(vlan) 【9】 （修改交换机SW2的VTP的工作模式为VTP客户机）Setting device to VTP CLIENT modeSW2(vlan) 【10】 （退出）
考题
阅读以下的配置信息，将(1)～(4)处空缺的内容填写相应的位置。SW1＞enable //进入特权模式SW1vlan database //进入vlan配置子模式SW1(lan)vtp server //设置本交换机为Server模式SW1(lan)vtp domain(1) //设置域名SW1(lan)(2) //启动修剪功能SW1(lan)exit //退出vlan配置模式SW1(lan)(3) //查看vtp设置信息VTP version:2Configuration Revision:0Maximum VLANs supported locally:64Number of existing VLANs:1VTP Operating Mode:ServerlVTP domain Name:ServerlVTP pruning Mode:EnableVTP V2 Mode:DisabledVTP Traps Generation:DisabledMD5 digest:0x82 0x6B 0xFB 0x94 0xEF 0x92 0x30Configuartion last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan)(4)Swtting device to VTP CLIENT modeSW2(vlan)exit
考题
Refer to the exhibit. What statement is true base d upon the configuration in the exhibit? ()
A. CGMP version 2 is being used.B. The switch will use sparse mode first, dense mode second.C. A rendezvous point must be configured in order for the interface to operate in sparse mode.D. IGMP version 2 is being used.E. The rendezvous point is IP address 172.16.4.16.F. If a rendezvous point is configured, the interface cannot operate in dense mode.
考题
You are a senior network administrator at TestKing and your trusty junior administrator tells you that he failed his task of adding VLAN 50 to a Catalyst switch in the network. You enter in the ‘show vtp status‘ command and get this output:TK2 show vtp statusVTP Version :2Configuration Revision :7Maximum VLANs supported local :68Number of existing VLANs :8VTP Operating Mode :ClientVTP Domain Name :corpVTP Pruning Mode :DisabledVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x22 0xF3 0x1AConfiguration last modified by 172.18.22.15 at 5-28-03 1t:53:20What commands must be issued on this switch to add VLAN 50 to the database?（）A. TK2(config-if)# switchport access vlan 50B. TK2(vlan)# vtp serverC. TK2(config)# config-revision 20D. TK2(config)# vlan 50 name TechE. TK2(vlan)# vlan 50F. TK2(vlan)# switchport trunk vlan 50
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()
A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?()
A. FWSM routes traffic between the VLANs.B. FWSM switches traffic between the VLANs.C. Transparent mode is often called bump-in-the-wire mode.D. Transparent mode firewall deployments are used most often in current designs.E. Traffic routed between VLANs is subject to state tracking and other firewall configurable options.
考题
Which two characteristics are true of a firewall running in routed mode based on the following information?()
A. FWSM routes traffic between the VLANs.B. FWSM switches traffic between the VLANs.C. Routed mode is often called bump-in-the-wire mode.D. Routed mode firewall deployments are used most often in current designs.
考题
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?()
A. clientB. dynamicC. serverD. staticE. transparent
考题
What are two characteristics of a switch that is configured as a VTP client?()
A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.E.Vtp client is the default vtp modeF.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally
考题
A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down. What might explain what happened？ （）A、The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.C、The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.
考题
Which statement ab0ut VLANs in a Cisco UCS is true?（）A、Fabric interconnect can never participate in VTPB、Fabric interconnect supports ISL and 802.1Q trunkingC、The supported range of VLANs is auto-configured by UCSD、VLANs are configured through the Cisco UCS manager. （fabric interconnect may be set up in switch mode）
考题
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
考题
What are two characteristics of a switch that is configured as a VTP client？（）A、if a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.B、The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C、Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D、When switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.E、Vtp client is the default vtp modeF、On switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally
考题
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）A、clientB、dynamicC、serverD、staticE、transparent
考题
Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）A、TransparentB、ServerC、AutoD、ClientE、User
考题
Switch R1 is configured to use the VLAN Trunking Protocol （VTP）. What does R1 advertise in its VTP domain？（）A、The VLAN ID of all known VLANs，the management domain name，and the total number of trunk links on the switch.B、The VLAN ID of all known VLANs，a 1-bit canonical format （CF1 Indicator），and the switch configuration revision number.C、The management domain name，the switch configuration revision number，the known VLANs， and their specific parameters.D、A 2-byte TPID with a fixed value of 0x8100 for the management domain number，the switch configuration revision number，the known VLANs，and their specific parameters.E、None of the other alternatives apply.
考题
Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.B、As a VTP server， the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
考题
Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）A、Learn and save VTP configuration in the running configuration.B、Create and change VLANs.C、Forwards information about VTP configuration.D、VTP is disabled on this device.E、VTP is not saved to NVRAM.
考题
单选题A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down. What might explain what happened？ （）A
The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.B
The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.C
The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.D
The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.
考题
单选题Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）A
TransparentB
ServerC
AutoD
ClientE
User
考题
单选题Which statement ab0ut VLANs in a Cisco UCS is true?（）A
Fabric interconnect can never participate in VTPB
Fabric interconnect supports ISL and 802.1Q trunkingC
The supported range of VLANs is auto-configured by UCSD
VLANs are configured through the Cisco UCS manager. （fabric interconnect may be set up in switch mode）
考题
单选题Switch R1 is configured to use the VLAN Trunking Protocol （VTP）. What does R1 advertise in its VTP domain？（）A
The VLAN ID of all known VLANs，the management domain name，and the total number of trunk links on the switch.B
The VLAN ID of all known VLANs，a 1-bit canonical format （CF1 Indicator），and the switch configuration revision number.C
The management domain name，the switch configuration revision number，the known VLANs， and their specific parameters.D
A 2-byte TPID with a fixed value of 0x8100 for the management domain number，the switch configuration revision number，the known VLANs，and their specific parameters.E
None of the other alternatives apply.
热门标签
最新试卷
