You are installing Windows 2000 server on Windows NT using an unattended installation. You find out the SCSI adapter is not supported by Microsoft HCL. You find out from the manufacturer that a new driver is available for installing on Windows 2000. How should you enter this information in the unattended installation?A．Specify $OEM$/TextmodeB．Specify $OEM$/C$/DriversC．Create a subfolder pointing to the share pointD．Create a subfolder called drivers.

考题 You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.You want to successfully install Windows 2000 Server on the computer.What should you do? (Each correct answer presents part of the solution. Choose two)A．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.B．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.C．Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.D．Insert a disk with the original SCSI firmware.E．Insert a disk with the OEM SCSI driver.

查看答案

考题 You are the network administrator for Ezonexam. The network includes a Microsoft Windows NT Server 4.0 member server computer that has a non-Plug and Play ISA network adapter.You want to upgrade this computer to Microsoft Windows 2000 Server. You also want to ensure that you maintain the current device configuration during the upgrade.What should you do? (Each correct answer presents part of the solution. Choose two)A. Install the latest driver for the network adapter.B. Disable the network adapter.C. Start the upgrade process by using Winnt32.exeD. Start the upgrade process by booting from the Windows 2000 Server compact disc.E. Configure BIOS to reserve the IRQ currently in use by the network adapter.F. Press F6 at the beginning of the text mode setup to specify an additional driver.

查看答案

考题 You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

查看答案

考题 You are the network administrator for Ezonexam.com.You need to install Windows 2000 Professional on 75 new computers in your network. You use Setup Manager wizard to configure a fully automated installation script. file. You test the unattended installation using the fully automated installation script. file. When the installation completes you realize that the Windows 2000 Professional CD does not contain the driver for the Plug and Play video adapter used by the new computers.You want to include the correct driver for the video adapter when installing Windows 2000 Professional.What should you do? (Each correct presents part of the solution. Select three.)A.Run sysprep.exe with the -pnp parameter.B.In the UserData section of the fully automated installation script. file, specify the ProductID variable.C.In the Unattended section of the fully automated installation script. file, set the Oem PnP Drivers Path property to the location of the video driver files.D.In the Unattended section of the fully automated installation script. file, set the Oem Preinstall property to Yes.E.Copy the video driver to the i386\$OEM$\$1\VidDriver.F.Copy the video driver to the i386\$$\System32.

查看答案

考题 You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.

查看答案

考题 You are the network administrator for Ezonexam.com.You are planning to upgrade 10 Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You have used the distribution folder to successfully upgrade other Windows NT Server 4.0 computers to Windows 2000. For these 10 new upgrades you wan to include a new service pack.You need to include the new service pack in the distribution folder so that the service pack is automatically installed during the upgrade process.What should you do?A．Create a sub folder named $OEM$\$C\SP under the i386 folder. Copy the new service pack to that subfolder.B．Create a subfolder named $OEM$\$$\SP under the i386 folder. Copy the new service pack to that subfolder.C．Run Update.exe from the new service pack and specify the -s option.D．Run winnt32 on the Windows NT Server 4.0 computers and specify the /u option

查看答案

考题 You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.

查看答案

考题 You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".You are unable to perform. the upgrade. What should you do to resolve the problem?A．Convert the system partition to NTFS.B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

查看答案

考题 You are the network administrator for Ezonexam.com.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.During the text portion of the installation, you receive the following error message:"Stop 0x00000078 Inaccessible_boot_device."You want to successfully upgrade the computer.What should you do? (Each answer presents part of the solution. Choose two)A．Start the computer by using a DOS disk and run FDISK.B．Update the firmware on the RAID controller.C．Restart the installation. During the text-mode setup-mode setup, press F6.D．Restart the installation. During the text-mode setup, create a new partition.E．Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.

查看答案

考题 You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？（）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

查看答案

考题 You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）A、On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to install the correct multiprocessor HAL. B、On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor. C、Download the patch from the motherboard manufacturer to allow the configuration of dual processors. D、Reinstall Windows 2000 Professional on both the test computers.

查看答案

考题 You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）A、Start the computer in Safe Mode. Enable driver signing.B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

查看答案

考题 You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM. C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted. D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

查看答案

考题 You install Windows 2000 Professional on an existing department’s computer setup, which was using Windows NT 4.0 Workstation. Later you are told that a dial-up connection will be needed to access a local Internet Service Provider. When you open the computer that connects to the ISP, you find that a 33.6k modem has already been installed. But the users insist, that you also install a faster 56k modem. After installing the new modem and rebooting the computer, you notice that there is a conflict between the two modems. How do you resolve this situation?（）A、Disable the 33.6 K modem.B、Disable the 56 K modemC、Disable the Com port 2D、Disable Com port 4E、Run Windows update， this will update this 33.6 K modem drivers.

查看答案

考题 You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）A、Use the listsvc command to disable the Zip device driverB、Select Recovery Console from the Recovery Menu.C、Use the disable command to disable the Zip device driverD、Select the Debug mode from the Windows 2000 Advanced Options menuE、Insert the Emergency Repair Disk and specify the path of the recovery file on the hard diskF、Start the computer using the Windows 2000 Professional CD-ROM.

查看答案

考题 You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.You are in the process of installing a Server Core installation of Windows Server 2012 R2 on a new ABC.com server， named ABC-SR13.Which of the following is TRUE with regards to a installing a Server Core installation of Windows Server 2012 R2？（）A、The Server Graphical Shell is installed， but not enabled.B、Server roles can be configured locally via the command prompt using Windows PowerShell.C、Server roles can be configured locally via Server Manager.D、You are able to access the Microsoft Management Console locally.E、The Desktop Experience is not available.

查看答案

考题 You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

查看答案

考题 You are designing a strategy for installing Windows server 2003 on the new domain controllers. Which method should you use?（）A、Unattended installationB、Remote Installation Services （RIS）C、Automated Deployment Services （ADS）D、Microsoft Systems Management Server （SMS）

查看答案

考题 You are the administrator of your company’s network. You attempt to install a printer driver on a Windows 2000 computer for a user named Linda. You receive the following error message： "Error 11-Cannot install printer driver." The driver was originally downloaded from the printer manufacturer’s Web site. You have successfully used the driver in the past on their Windows 2000 Professional computers. You want to configure Linda’s computer to check for driver integrity and to allow you to install this printer driver. What should you do？（）A、Configure driver signing to display a message before installing an unsigned driver.B、Configure driver signing to ignore File Signature Verification.C、Create a Local Computer Policy to enable Windows File Protection.D、Use the Add Printer Driver wizard to install the driver.Create a Local Computer Policy to enable Windows File Protection.E、Use the Print Troubleshooter.F、Configure the computer to prevent the installation of unsigned drivers.

查看答案

考题 You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）A、 Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk. D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk. E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

查看答案

考题 You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 installed. You are in the process of installing a Server Core installation of Windows Server 2012 on a new ENSUREPASS.com server， named ENSUREPASS-SR13. Which of the following is TRUE with regards to a installing a Server Core installation of Windows Server 2012？（）A、The Server Graphical Shell is installed， but not enabledB、Server roles can be configured locally via the command prompt using Windows PowerShell.C、Server roles can be configured locally via Server ManagerD、You are able to access the Microsoft Management Console locallyE、The Desktop Experience is not available

查看答案

考题 You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.

查看答案

考题 You have a Windows Server 2008 R2 Hyper-V failover cluster. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager （VMM） 2008 R2. You need to find out whether the failover cluster is properly configured to support highly available virtual machines （VMs）. Which PowerShell cmdlet should you run？（）A、Test-ClusterB、Enable-VMHostC、Get-VMHostRatingD、Test-ClusterResourceFailure

查看答案

考题 You install a new CD-ROM on your computer. After installing the appropriate drivers and restarting the computer you notice that it is not working correctly. You check resources and find out that it is not using “Automatic resource settings”. How do you get your CDROM to work? （）A、Check ‘Use Automatic Settings’B、Update the drivesC、Use the windows troubleshooterD、Manually set the interrupt，I/O port， and memory address to that of the hardware manufacturers specifications.

查看答案

考题 You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）A、Start the computer in safe mode. Enable driver signing.B、Start the computer in safe mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

查看答案

考题 You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.

查看答案

考题单选题You are designing a strategy for installing Windows server 2003 on the new domain controllers. Which method should you use？（）A Unattended installationB Remote Installation Services （RIS）C Automated Deployment Services （ADS）D Microsoft Systems Management Server （SMS）

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：