网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 190.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, best
- A、R1 has a neighbor 1.1.1.1 command configured.
- B、R1 has a neighbor 2.2.2.2 command configured.
- C、The show ip bgp command lists a line for 190.1.0.0/16 with both a n > and an i on the left.
- D、R1 is in ASN 1.
参考答案
更多 “ The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 190.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, bestA、R1 has a neighbor 1.1.1.1 command configured.B、R1 has a neighbor 2.2.2.2 command configured.C、The show ip bgp command lists a line for 190.1.0.0/16 with both a n and an i on the left.D、R1 is in ASN 1.” 相关考题
考题
Given the following router output,which configuration file will the router use at its next reload?()
A.configB.clientqos.cnfC.startup-configD.running-configuration
考题
The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（）Network Next Hop Metric LocPrf Weight Path* 130.1.1.0/28 1.1.1.1 0 1 2 3 4 iA. The route is learne d from an eBGP peerB. The route has no more than three ASNs in the AS_PatHC. The route is the best route for this prefixD. None of these facts can be positively determined by this output
考题
The following output exists on Router R1, a router internal to area 1. What can you d etermine as true from the output of the show ip ospf database summary command?()
A. The LSA was created by an ABR due to an area range command.B. The LSA was created by an ASBR due to a summary - address command.C. If cr eated by an area range command, the best metric for a subordinate subnet on that ABR must have been 11.D. None of the other answers is correct.
考题
According to the following output, can you tell me which command can redistribute IGRP into EIGRP?()
A. Under t he router eigrp mode add redistribute igrp 123 subnetsB. Under the router igrp mode add redistribute eigrp 123C. None, EIGRP and IGRP are automatically redistributed in this instance.D. Under the router eigrp mode add redistribute igrp 123
考题
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What information can you determine about this network?()
A. The network is stableB. There is a flapping link or interface, and router C knows an alternate path to the networkC. There is a flapping link or interf ace, and router C does not know an alternate path to the networkD. EIGRP is not working correctly on router CE. There is not enough information to make a determination
考题
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What can you conclude about this network? ()
A. The network has been stable for at least the last 45 minutesB. There is a flapping link or interf ace, and router C knows an alternate path to the networkC. There is a flapping link or interface, and router A does not know an alternate path to the networkD. EIGRP is not working correctly on router CE. There is not enough information to make a determination
考题
You are troubleshooting a WAN connection for TestKing, and on the router you execute the, debug ppp authentication command, and view the following output:What kind of handshake was used for the PPP authentication?（）A. one-wayB. two-wayC. three-wayD. No handshakes required during authenticationE. None of the above
考题
For the accompanying router output, which of the following statements describes the stat e that neighbor 172.16.254.3 is in?()
A. The router will not accept connections from the peer.B. BGP can exchange routing information in this state.C. The router is listening on its server port for connection requests from the peer.D. The router ha s sent out an active TCP connection request to the peer.
考题
The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（）P 10.11.1.0/24, 2 successors, FD is 2172419via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1via 10.1.1.6 (2172423/28167), Serial0/0/0.2A.0B.1C.2D.3
考题
After logging into the RtrB router, you issue the show interface command as displayed below:After considering the effects of the command output illustrated in the exhibit above,which of the following protocols are operational on the serial link?（）A. PPPB. IPC. CompressionD. IPXE. MultilinkF. ATX
考题
Use the output from the router shown in the graphic above to determine which of the following are correct.()
A. Router John uses a link-state routing protocol.B. Router John will receive routing updates on the Serial0/0 interface.C. Router John will receive routing updates on the Serial0/1 interface.D. Router John will send routing updates out the Serial0/0 interface.E. Router John will send routing updates out the FastEthernet0/0 interface.F. Router John will send routing updates out the Serial0/1 interface.
考题
Which of these statements accurately identifies how Unicast Reverse Path Forwarding can be employed to prevent the use of malformed or forged IP sources addresses？（）A、It is applied only on the input interface of a router.B、It is applied only on the output interface of a router.C、It can be configured either on the input or output interface of a router.D、It cannot be configured on a router interface.E、It is configured under any routing protocol process.
考题
The following output was taken from Router R3. A scan of R3's configuration shows that no bandwidth commands have been configured in this router. Which of the following answers lists configuration settings could be a part of a configuration tha t results in the following output?（） R3#show ip ospf interface brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Se0/0/0.2 3 34 10.10.23.3/29 647 P2P 1/1 Se0/0/0.1 3 34 10.10.13.3/29 1000 P2P 1/1 Fa0/0 3 34 10.10.34.3/24 20 BDR 1/1A、An a uto - cost reference - bandwidth 1000 command in router ospf modeB、An auto - cost reference - bandwidth 2000 command in router ospf modeC、An ip ospf cost 1000 interface S0/0/0.1 command in router ospf modeD、An auto - cost reference - bandwidth 64700 command i n router ospf mode
考题
OSPF is enabled on router A. You execute the following command on router A and receive theaccompanying output:RouterA#ping 224.0.0.5 repeat1Type escape sequence to abort.Sending 1, 1 00 - byte ICMP Echos to 224.0.0.5, timeout is 2 seconds:Reply to request 0 from 10.100.100.1, 4 ms10.100.100.1 is the IP address of a loopback interface on router A. What can you conclude about router A?（）A、Only the router A loopback interface is parti cipating in the OSPF routing processB、None of the router A interfaces are participating in the OSPF routing processC、Router A is using the loopback interface IP address as its OSPF router IDD、Router A does not have any reachable OSPF neighbors
考题
The following output was taken from the show ip bgp command on Router R2. In this case, which of the following commands are most likely to already be configured on R2?（） BGP router identifier 11.11.11.11, local AS number 11 ... Neighbor V AS Ms gRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 87 87 0 0 0 00:00:06 Idle (Admin) 2.2.2.2 4 3 173 183 41 0 0 00:58:47A、router bgp 11B、neighbor 1.1.1.1 remote- as 11C、neighbor 2.2.2.2 prefix - limit 1D、neighbor 1.1.1.1 shutdown
考题
The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18A、This router has set the Weight of this route to 10.B、This router's BGP table lists this route as an iBGP route.C、This router's MED has been set to 10.D、This router's BGP table lists an AS_Path length of 10 for this route.
考题
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）A、R1 has been configured with an ip default- network 2.0.0.0 command.B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D、Another router has been configured with an ip default - network 2.0.0.0 command.E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
考题
What is true about access control on bridged and routed VLAN traffic？（）A、Router ACLs can be applied to the input and output directions of a VLAN interfaceB、Bridged ACLs can be applied to the input and output directions of a VLAN interfaceC、Only router ACLs can be applied to a VLAN interfaceD、VLAN maps and router ACLs can be used in combinationE、VLAN maps can be applied to a VLAN interfac
考题
The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（） P 10.11.1.0/24, 2 successors, FD is 2172419 via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1 via 10.1.1.6 (2172423/28167), Serial0/0/0.2A、0B、1C、2D、3
考题
单选题Given the following router output,which configuration file will the router use at its next reload?（）A
configB
clientqos.cnfC
startup-configD
running-configuration
考题
单选题The output of the show aaa domain-map displays the following information: Domain: isp1.com; virtual-router: vr1; loopback: 1 Domain: isp2.com; virtual-router: vr2; loopback: 1 Domain: none; virtual-router: vr3; loopback: 1 Domain: default; virtual-router: vr4; loopback: 1 The end user supplies a login name of joe@isp7.com . Which virtual router is responsible for authenticating this user?（）A
vr1B
vr2C
vr3D
vr4
考题
单选题The following output occurs on Router R1. Which of the following cannot be determine d from this output?（） R1# show ip route 180.1.1.0 255.255.255.240 Routing entry for 180.1.1.0/28 Known via "bgp 2", distance 20, metric 0 Tag 3, type external Last update from 192.168.1.2 00:10:27 ago Routing Descriptor Blocks: * 192.168.1.2, from 19 2.168.1.2, 00:10:27 ago Route metric is 0, traffic share count is 1 AS Hops 2 Route tag 3A
The type of BGP peer (iBGP or eBGP) that advertised this route to R1B
R1's ASNC
The next - hop router's ASND
The AS_Path length
考题
单选题Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100A
The output describes the contents of a Type 5 LSAB
3.3.3.3 identifies a ro uter as being the router performing redistributionC
R1's metric for its best route to reach the router with RID 9.9.9.9 is 100D
The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100
考题
单选题The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18A
This router has set the Weight of this route to 10.B
This router's BGP table lists this route as an iBGP route.C
This router's MED has been set to 10.D
This router's BGP table lists an AS_Path length of 10 for this route.
考题
单选题OSPF is enabled on router A. You execute the following command on router A and receive theaccompanying output:RouterA#ping 224.0.0.5 repeat1Type escape sequence to abort.Sending 1, 1 00 - byte ICMP Echos to 224.0.0.5, timeout is 2 seconds:Reply to request 0 from 10.100.100.1, 4 ms10.100.100.1 is the IP address of a loopback interface on router A. What can you conclude about router A?（）A
Only the router A loopback interface is parti cipating in the OSPF routing processB
None of the router A interfaces are participating in the OSPF routing processC
Router A is using the loopback interface IP address as its OSPF router IDD
Router A does not have any reachable OSPF neighbors
考题
多选题The following output was taken from Router R3. A scan of R3's configuration shows that no bandwidth commands have been configured in this router. Which of the following answers lists configuration settings could be a part of a configuration tha t results in the following output?（） R3#show ip ospf interface brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Se0/0/0.2 3 34 10.10.23.3/29 647 P2P 1/1 Se0/0/0.1 3 34 10.10.13.3/29 1000 P2P 1/1 Fa0/0 3 34 10.10.34.3/24 20 BDR 1/1AAn a uto - cost reference - bandwidth 1000 command in router ospf modeBAn auto - cost reference - bandwidth 2000 command in router ospf modeCAn ip ospf cost 1000 interface S0/0/0.1 command in router ospf modeDAn auto - cost reference - bandwidth 64700 command i n router ospf mode
考题
单选题The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（） Network Next Hop Metric LocPrf Weight Path * 130.1.1.0/28 1.1.1.1 0 1 2 3 4 iA
The route is learne d from an eBGP peerB
The route has no more than three ASNs in the AS_PatHC
The route is the best route for this prefixD
None of these facts can be positively determined by this output
考题
单选题Which of these statements accurately identifies how Unicast Reverse Path Forwarding can be employed to prevent the use of malformed or forged IP sources addresses？（）A
It is applied only on the input interface of a router.B
It is applied only on the output interface of a router.C
It can be configured either on the input or output interface of a router.D
It cannot be configured on a router interface.E
It is configured under any routing protocol process.
热门标签
最新试卷
