网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?（）
- A、The WLAN card is 802.11g.
- B、The WLAN card is 802.11b.
- C、The WLAN card is 802.11n.
- D、The WLAN card is 802.11a.
参考答案
更多 “ A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?（） A、The WLAN card is 802.11g.B、The WLAN card is 802.11b.C、The WLAN card is 802.11n.D、The WLAN card is 802.11a.” 相关考题
考题
After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause?()
A. The wireless switch was damaged during the display installation.B. The network card has failed.C. The new display is interfering with the wireless signal.D. The antenna connector was not reconnected.
考题
After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?()
A. Antennae is not connectedB. Wireless card is defectiveC. Drivers needs to be updatedD. OS needs to be updated
考题
A wireless client cannot connect to an 802.11b／g BSS with a b／g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?()
A. The incorrect channel is configured on the client.B. The client‘s IP address is on the wrong subnet.C. The client has an incorrect pre-shared key.D. The SSID is configured incorrectly on the client.
考题
Which of the general policies on the wlan edit page on the wlan controller would be used when configuring a radio for a single antenna for an outdoor application？（）A、802.11b/gB、radioC、access pointD、802.11a
考题
Which two WLAN implementation statements are true？（）A、An autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine （WLSE/WLSM）.B、An autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System （WCS）.C、A lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine （WLSE/WLSM）.D、A lightweight wireless solution consists of autonomous access points （APs）， which are managed by a WLAN solution engine （WLSE/WLSM）.E、A lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System （WCS）.
考题
Which explanation describes a wireless client IGMP multicast join request using a Cisco Unified Wireless Network v5.2 architecture of AP to WLAN controller?（）A、passed by the AP to its connected switch and then forwarded directly to the connected router，which creates an MGID table entryB、passed by the AP to the WLAN controller and then forwarded to the source PIM-enabled router，which creates an MGID table entryC、passed by the AP to the WLAN controller， which creates an MGID table entry before forwarding to the directly connected PIM-enabled routerD、passed by the AP to its connected switch and then forwarded to the rendezvous point router，which creates an MGID table entry
考题
Which three devices are used by the Cisco Wireless Control System （WCS） for wireless management？（）A、WLAN controllersB、WLAN Solution Engine （WLSE）C、Cisco Wireless Control System （WCS）D、Cisco Wireless Location ApplianceE、lightweight access point （AP）F、autonomous access point （AP）
考题
What is recommended for a wireless LAN infrastructure configuration when using SVP-version SpectraLink phones?（）A、Disable DTPC on the radio.B、Disable higher data rates on the radio.C、Disable WMM policy on the WLAN.D、Disable multicast on the WLAN.
考题
Which of the following expansion slots would be BEST for a fiber network card？（）A、 ISAB、 PCIxC、 PCIeD、 AGP
考题
After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause？（）A、The wireless switch was damaged during the display installation.B、The network card has failed.C、The new display is interfering with the wireless signal.D、The antenna connector was not reconnected.
考题
A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）A、The card needs to have the compatibility jumpers set before it can be installed into the system.B、The card is a PCI Express card and the laptop supports pcmica.C、The expansion slot needs to be enabled in theblos first.D、The card is a PCMCIA card and the laptop supports PCI Express cards.
考题
A user replaces a laptop’s wireless PCMCIA card with a different vendor’s card. All of the new card configuration steps have been followed. The OS sees all known wireless networks but cannot connect to the user’s network. Which of the following is the MOST likely reason for this behavior?（）A、DMZ is enabled.B、MAC filtering is enabled.C、WEP is being used.D、SSID broadcast is disabled.
考题
A customer, who brings their laptop to work on a daily basis, calls to ask for the best way to add USB ports and an additional network card to their laptop. Which of the following would meet the user’s requirements?（）A、Docking stationB、Self powered USB hubC、KVM switchD、Non-powered USB hub
考题
As the Company wireless administrator， you required to be knowledgeable about the wireless LAN components. Which two statements about these components are true？ （）A、 In the autonomous access point solution， control is provided by the WLAN controller.B、 In the lightweight access point solution， WLAN management is provided by the WLAN Control System （WCS）.C、 In the autonomous access point solution， control is provided by the WDS （Wireless Domain Services）.D、 Cisco Aironet autonomous access points cannot be supported by the Cisco Unified Wireless Network.E、 Ii the lightweight access point solution， WLAN management is provided by the WLAN Solution Engine （WLSE）.F、 Cisco Aironet lightweight access points cannot be supported by the Cisco Unified Wireless Network.
考题
A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? （）A、The WLAN card is 802.11g.B、The WLAN card is 802.11b.C、The WLAN card is 802.11n.D、The WLAN card is 802.11a.
考题
A laptop will not output to a connected projector. Which of the following steps should a technician take FIRST?（）A、Press the appropriate function + monitor key.B、Adjust the BIOS settings for external display.C、Replace the video card on the laptop.D、Update video drivers for the video card.
考题
After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?（）A、Antennae is not connectedB、Wireless card is defectiveC、Drivers needs to be updatedD、OS needs to be updated
考题
A technician has replaced a video card with another manufacturer’s video card. The driverinstallation does not complete. Which of the following steps should the technician take FIRST?（）A、Roll back the driver.B、Install the original video card and reboot.C、Delete the monitor.D、Remove the video card and reboot.
考题
While performing a preventative maintenance check on a personal computer, a technician notices thatseveralunused expansion card slots have open ports. Which of the following BEST describes why the covers for these card slots should be reinstalled?（）A、Help limit radio frequency interference (RFI) inside the case.B、Help ensure proper air flow through the case.C、Help prevent moisture buildup in the case.D、Help limit electrostatic discharge (ESD) inside the case.
考题
单选题A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless carD.The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）A
The incorrect channel is configured on the client.B
The client's IP address is on the wrong subnet.C
The client has an incorrect pre-shared key.D
The SSID is configured incorrectly on the client.
考题
单选题After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?（）A
Antennae is not connectedB
Wireless card is defectiveC
Drivers needs to be updatedD
OS needs to be updated
考题
单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?（）A
The WLAN card is 802.11g.B
The WLAN card is 802.11b.C
The WLAN card is 802.11n.D
The WLAN card is 802.11a.
考题
单选题A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）A
The card needs to have the compatibility jumpers set before it can be installed into the system.B
The card is a PCI Express card and the laptop supports pcmica.C
The expansion slot needs to be enabled in theblos first.D
The card is a PCMCIA card and the laptop supports PCI Express cards.
考题
单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?（）A
The WLAN card is 802.11g.B
The WLAN card is 802.11b.C
The WLAN card is 802.11n.D
The WLAN card is 802.11a.
考题
单选题After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause？（）A
The wireless switch was damaged during the display installation.B
The network card has failed.C
The new display is interfering with the wireless signal.D
The antenna connector was not reconnected.
考题
单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? （）A
The WLAN card is 802.11g.B
The WLAN card is 802.11b.C
The WLAN card is 802.11n.D
The WLAN card is 802.11a.
考题
单选题Which of the following expansion slots would be BEST for a fiber network card？（）A
ISAB
PCIxC
PCIeD
AGP
热门标签
最新试卷
