网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）
- A、Enable DHCP server on the HMC
- B、Configure host name and IP address on DNS server
- C、Manually set the IP address of the service processor
- D、Connect a RS-232 cable from the HMC to the service processor
参考答案
更多 “ Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）A、Enable DHCP server on the HMCB、Configure host name and IP address on DNS serverC、Manually set the IP address of the service processorD、Connect a RS-232 cable from the HMC to the service processor” 相关考题
考题
An administrator mistakenly shutdown production after a fallover because the service IP address Was shifted from the normal production node to the standby node. What can be done to avoid this type of mistake in the future？（） A、 Include the service IP address in the administrator’s PS1 promptB、 Alias the service IP address to the hostname in the /etc/host fileC、 Define a persistent IP address with HACMP and make it a practice to use the persistent address for administration workD、 Add a DNS entry to map the standby node name to the service IP address so telnet connections will be to the correct node
考题
You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A、Stop and restart the DNS Client service.B、Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C、Add an A （host） record for the computer to the DNS server’s zone file.D、Configure your DHCP server to have a DNS server address of 10.1.1.5.
考题
DNS servers provide what service?（）A、they run a spell check on host names to ensure accurate routingB、they map individual hosts to their specific IP addressC、they convert domain names into IP addressD、Given an IP address,they determine the name of the host that is…
考题
A p5 570 customer is currently running AIX 5.3. The customer now wants to add Virtual Ethernet to two of the LPARs. This will enable the application tier can communicate to the database tier without using an external Ethernet card. What is the best way to accomplish this task?（）A、Create a VIO serverB、Modify the LPAR profiles to add a Virtual Ethernet adapterC、Buy the Advanced Power Virtualization feature and enter a authorization code at the HMCD、Buy the Advanced Power Virtualization feature and enter a authorization code at the service processor menu
考题
ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）A、Configure the IP address through the first client partition.B、Configure the IP address through the ASMI menus.C、Configure the POWER5 service processor for DHCP from the HMC DHCP server.D、Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
考题
You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?（）A、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP as the IP address the instance.B、Configure multiple Junos Pulse Access Control Service instances on the enforcer, specifying the specific IP address each device in a separate instance.C、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and active node address in the instance.D、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and passive node address in the instance.
考题
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）A、Install a DHCP server.B、Install a WINS server. Configure each computer to use WINS.C、Create an Lmhost file on each computer.D、Create a Hosts file on each computer.
考题
Your network consists of a single Active Directory domain.You implement a new subnet. On the new subnet， you install a new DHCP server that runs Windows Server 2003 Service Pack 2 （SP2）. You create a scope for the 192.168.10.0/24 network ID. You connect a new client computer named Client1 to the subnet. Client1 runs Windows XP Professional Service Pack 3 （SP3）. You discover that Client1 has an IP address of 169.254.10.22 and is configured to receive IP configurations automatically.You need to ensure that Client1 receives an IP configuration from Server1. What should you do？（）A、Activate the DHCP scope.B、Create a reservation for Client1.C、Enable BOOTP forwarding on the router.D、Configure a DHCP Relay Agent on the subnet.
考题
Your network contains a Routing and Remote Access server named RRAS1 and a DHCP server named DHCP1. RRAS1 and DHCP1 are located in different subnets.RRAS1 is configured to support VPN connections from the Internet. DHCP1 has a scope that provides IP addresses for the VPN connections.You need to ensure that VPN clients that connect to RRAS1 can receive IP addresses from DHCP1.What should you do？（）A、On DHCP1, configure a DHCP Relay Agent.B、On DHCP1, install the Routing role service.C、On RRAS1, configure a DHCP Relay Agent.D、On RRAS1, install the Routing role service.
考题
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
考题
You have two Exchange Server 2010 servers that have the Client Access， Hub Transport， and Mailbox server roles installed.The servers are members of a database availability group （DAG）.You need to ensure that all users can access the Client Access server if a single server or service fails.What should you do？（）A、from DNS manager， create two new records for the Client Access servers.B、from Failover Cluster Manager， create a new service named Client Access Server and assign a new IP address.C、Install the Network Load Balancing feature on each server and assign a second IP address to each network adapter.D、Deploy a hardware load balancer.Create a DNS record for the virtual IP address and configure a Client Access server array.
考题
Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do？ （）A、 Create a new scope for the DNS servers.B、 Create a reservation for the DHCP serverC、 Configure the 005 Name Servers scope optionD、 Configure an exclusion that contains the IP addresses of the four DNS servers
考题
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
考题
You have a server that runs windows server 2008 you need to configure the server as a VPN server. What should you install on the server?（）A、Windows deployment Services role and deployment server role service.B、Windows deployment services role and deployment transport role service.C、Network policy and access services role and routing and remote access services role service.D、Network policy and access services and host credential authorization protocol role service.
考题
You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）A、Stop and Restart DNS client service.B、Add 10.1.1.5 to DNS server list on TCP/IP advanced properties tab. C、Add A （host） record for the computer to the DNS server zone file. D、Configure DHCP server to have a DNS server address of 10.1.1.5
考题
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Access Service role service installed. Server1 is configured as a VPN server.You need to ensure that you can configure Server1 as a Network Address Translation (NAT) server.What should you do first on Server1？（）A、Enable IPv4 routing.B、Enable IPv6 routing.C、Add a new routing protocol.D、Add the Routing role service.
考题
Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）A、From the Static Routes node, configure a static route.B、From the server properties, configure SSL Certificate Binding.C、From the NAT interface, add an address pool and a reservation.D、From the NAT interface, configure the Secure Web Server (HTTPS) service.
考题
You need to recommend an IP addressing strategy for the client computers in the new sales office. What should you recommend implementing in the new sales office？（）A、DHCP server rolesB、the DirectAccess featureC、the Network Policy Server （NPS） role serviceD、the Remote Access Service role service
考题
During the Solution Assurance for a p5 590, Companycom states there is a plan to install OEM Emulex cards in the p5 590. The customer assumes there will be no problem with the plan since IBM resells the Emulex cards. What is the correct response for the customer?（）A、The IBM CE will install the cardB、The card will not be supported by IBMC、The AIX device driver should work fineD、The customer is correct, there should be no problem
考题
单选题Companycom purchased a new p5 570 without a HMC. The customer does not know how to power the full frame/system off since there does not appear to be an on/off button. What can be done to accomplish this task?（）A
Telnet into the machine and do a shutdown -FrB
Log into ASMI as Administrator and use ASMI menusC
Log into the service processor using WebSM and use ASMI menusD
Use the off button which is located to the left below the LEDs
考题
单选题ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）A
Configure the IP address through the first client partition.B
Configure the IP address through the ASMI menus.C
Configure the POWER5 service processor for DHCP from the HMC DHCP server.D
Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
考题
单选题You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）A
Install a DHCP server.B
Install a WINS server. Configure each computer to use WINS.C
Create an Lmhost file on each computer.D
Create a Hosts file on each computer.
考题
单选题An administrator mistakenly shutdown production after a fallover because the service IP address Was shifted from the normal production node to the standby node. What can be done to avoid this type of mistake in the future？（）A
Include the service IP address in the administrator’s PS1 promptB
Alias the service IP address to the hostname in the /etc/host fileC
Define a persistent IP address with HACMP and make it a practice to use the persistent address for administration workD
Add a DNS entry to map the standby node name to the service IP address so telnet connections will be to the correct node
考题
单选题You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）A
Stop and Restart DNS client service.B
Add 10.1.1.5 to DNS server list on TCP/IP advanced properties tab. C
Add A （host） record for the computer to the DNS server zone file. D
Configure DHCP server to have a DNS server address of 10.1.1.5
考题
单选题Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）A
Enable DHCP server on the HMCB
Configure host name and IP address on DNS serverC
Manually set the IP address of the service processorD
Connect a RS-232 cable from the HMC to the service processor
考题
单选题You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A
Stop and restart the DNS Client service.B
Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C
Add an A （host） record for the computer to the DNS server’s zone file.D
Configure your DHCP server to have a DNS server address of 10.1.1.5.
考题
单选题Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）A
Enable DHCP server on the HMCB
Configure host name and IP address on DNS serverC
Manually set the IP address of the service processorD
Connect a RS-232 cable from the HMC to the service processor
热门标签
最新试卷
