网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
某局域网内交换机为VTP SERVER，VTP Domain Name：CISCO，Configuration Revision：4，下面哪台交换机可以同步到它的VTP配置（）。
A
Mode：Transparent，Domain Name：CISCO，Configuration Revision：3
B
Mode：Client，Domain Name：CISCO，Configuration Revision：3
C
Mode：Client，Domain Name：CISCO，Configuration Revision：5
D
Mode：Client，Domain Name：CISCO1，Configuration Revision：3
参考答案
参考解析
解析：
暂无解析
更多 “单选题某局域网内交换机为VTP SERVER，VTP Domain Name：CISCO，Configuration Revision：4，下面哪台交换机可以同步到它的VTP配置（）。A Mode：Transparent，Domain Name：CISCO，Configuration Revision：3B Mode：Client，Domain Name：CISCO，Configuration Revision：3C Mode：Client，Domain Name：CISCO，Configuration Revision：5D Mode：Client，Domain Name：CISCO1，Configuration Revision：3” 相关考题
考题
阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。SW1＞enable (进入特权模式)SW1vlan database (进入VLAN配置子模式)SW1(vlan)vtp server (设置本交换机为Server模式)SW1(vlan)vtp domain (1) (设置域名)SW1(vlan) (2) (启动修剪功能)SW1(vlan)exit (退出VLAN配置模式)SW1show (3) (查看VTP设置信息)VTP Vetsion :2Configuration Revision :0Maximum VLANs supported locrlly :64Number of existing VLANs :1VTP Operating Mode :ServerVTP Domain Name :Server1VTP Pruning Mode :EnableVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan) (4)Setting device to VTP CLIENT mode.SW2(vlan)exit
考题
The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?A．It allows two VTP servers to exists in the same domain, each configured with different passwordsB．It is the password required when promoting a switch from VTP client mode to VTP server modeC．It is used to access the VTP server to make changes to the VTP configurationD．It is used to validate the sources of VTP advertisements sent between switchesE．None of the above
考题
利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网，可以对各个子网实施不同的管理策略。以下是某台交换机(Switch)的部分配置过程，其中空缺处的命令/参数可能是(48)。 Switch #vlan database Switch (vlan) # vtp ? Switch (vlan) #(48) Changing VTP domain name from NULL to Server1 Switch(vlan)# exitA．vtp ServerB．vip domain Server1C．vtp domain ServerD．vtp domain
考题
Which three statements about VTP features are true?()
A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB.Each broadcast domain on a switch can have its own unique VTP domainC.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E.VTP pruning is used to increase available bandwidth in trunk linksF.Client,server,and transparent are valid VTP modesG. To configure a switch to be part of two VTP domains,each domain must have its own passwords
考题
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A.#vtp domain unsetB.#delete vlan.datC.#no vtp domainD.#vtp domain null
考题
图1中交换机同属一个VTP域。除交换机B外，所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是______。A) set vtp mode transparent和set vtp mode serverB) set vtp mode server和set vtp mode transparentC) set vtp mode server和set vtp mode clientD) set vtp mode server和set vtp mode serverA．B．C．D．
考题
下图中交换机同属一个VTP域。除交换机B外，所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是( )。A) set vtp mode transparent和set vtp mode serverB) set vtp mode server和set vtp mode transparentC) set vtp mode server和set vtp mode clientD) set vtp mode server和set vtp mode server
考题
Which three statements about VTP features are true?（）A、When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB、Each broadcast domain on a switch can have its own unique VTP domainC、VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D、When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E、VTP pruning is used to increase available bandwidth in trunk linksF、Client,server,and transparent are valid VTP modesG、To configure a switch to be part of two VTP domains,each domain must have its own passwords
考题
What is the purpose of the command shown below?vtp password Fl0r1da（）A、It is used to validate the sources of VTP advertisements sent between switches.B、It is used to access the VTP server to make changes to the VTP configuration.C、It allows two VTP servers to exist in the same domain, each configured with different passwords.D、It is the password required when promoting a switch from VTP client mode to VTP server mode.E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
考题
What action should you execute if you wanted to enable VTP pruning on your entire management domain？（）A、 Enable VTP pruning on any client switch in the management domain.B、 Enable VTP pruning on any switch in the management domain.C、 Enable VTP pruning on every switch in the management domain.D、 Enable VTP pruning on a VTP server in the management domain.E、 Disable VTP pruning on a VTP server in the management domain.
考题
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A、#vtp domain unsetB、#delete vlan.datC、#novtp domainD、#vtp domain null
考题
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）A、Switch2 is configured for only VLAN1B、Switch2 is a VTP server in a different domainC、Switch2 is a VTP server in the Company domainD、Switch2 is not a VTP domain.E、Switch2 has a lower VTP configuration revision number than the current VTP revisionF、Switch2 has a higher VTP configuration revision number than the current VTP revision
考题
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A、#vtp domain unsetB、#delete vlan.datC、#no vtp domainD、#vtp domain null
考题
Assuming default setting，how can you erase the VTP data base of VLANs on a CISCO IOS switch running in VTP server mode？（）A、Enable VTP pruningB、From privileged mode，erase the startup configuration file，then reload.C、From privileged mode，erase the vlandate file，then reload.D、Cycle the switch power.
考题
Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.B、As a VTP server， the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
考题
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?（）A、A switch in the VTP client mode cannot update its local VLAN database.B、A trunk link must be configured between the switches to forward VTP updates.C、A switch in the VTP server mode can update a switch in the VTP transparent mode.D、A switch in the VTP transparent mode will forward updates that it receives to other switches.E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.
考题
Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）A、Learn and save VTP configuration in the running configuration.B、Create and change VLANs.C、Forwards information about VTP configuration.D、VTP is disabled on this device.E、VTP is not saved to NVRAM.
考题
多选题In a customer’s network， VLAN Trunking Protocol （VTP） is running with a domain named main1. VLANs 1，2，3，4，5，10，20 are active on the network. Suddenly the whole network goes down. No traffic is being passed on VLANs 2，3，4，5，10，20， however traffic passes on VLAN 1 and indicates all switches are operational. Right before the network problem occurred， a switch named TEST1 was added to the network. What three configuration issues on TEST1 could be causing the network outage？（）ATEST1 is configured as a VTP server with a different domain name.BTEST1 is not configured to participate in VTP.CTEST1 is configured as a VTP server with the domain name main1.DTEST1 has a lower VTP configuration revision than the current VTP revision.ETEST1 has a higher VTP configuration revision than the current VTP revision.FTEST1 is configured with only VLAN1.
考题
单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A
#vtp domain unsetB
#delete vlan.datC
#novtp domainD
#vtp domain null
考题
单选题What action should you execute if you wanted to enable VTP pruning on your entire management domain？（）A
Enable VTP pruning on any client switch in the management domain.B
Enable VTP pruning on any switch in the management domain.C
Enable VTP pruning on every switch in the management domain.D
Enable VTP pruning on a VTP server in the management domain.E
Disable VTP pruning on a VTP server in the management domain.
考题
多选题Which three statements about VTP features are true?（）AWhen properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesBEach broadcast domain on a switch can have its own unique VTP domainCVTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.DWhen properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.EVTP pruning is used to increase available bandwidth in trunk linksFClient,server,and transparent are valid VTP modesGTo configure a switch to be part of two VTP domains,each domain must have its own passwords
考题
多选题A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）ASwitch2 is configured for only VLAN1BSwitch2 is a VTP server in a different domainCSwitch2 is a VTP server in the Company domainDSwitch2 is not a VTP domain.ESwitch2 has a lower VTP configuration revision number than the current VTP revisionFSwitch2 has a higher VTP configuration revision number than the current VTP revision
考题
单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A
#vtp domain unsetB
#delete vlan.datC
#no vtp domainD
#vtp domain null
考题
多选题In the network， VLAN Trunking Protocol （VTP） is running with a domain name of R1. VLANs 1， 2，3， 4， 5， 10， 20 are active on the network. Suddenly the whole network goes down. No traffic isbeing passed on VLANs 2， 3， 4， 5， 10， 20. However， traffic passes on VLAN 1 and indicates allswitches are operational. Right before the network problem occurred； a switch named SW13 wastaken out of the lab and added to the network. What three configuration issues on SW13 could becausing the network outage？（）ASW13 has a higher VTP configuration revision than the current VTP revisionBSW13 is configured as a VTP server with a different domain nameCSW13 is configured as a VTP server with the domain name R1DSW13 has a lower VTP configuration revision than the current VTP revisionESW13 is not configured to participate in VTPFSW13 is configured with only VLAN1
考题
单选题What is the purpose of the command shown below vtp password Fl0r1da（）。A
It is used to validate the sources of VTP advertisements sent between switches.B
It is used to access the VTP server to make changes to the VTP configuration.C
It allows two VTP servers to exist in the same domain, each configured with different passwords.D
It is the password required when promoting a switch from VTP client mode to VTP server mode.E
It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
热门标签
最新试卷
