1.On the DesignJet 500/800, what is the first step to troubleshoot image quality problems?
A: Print the image quality plot.
B: Visually inspect the customer's print.
C: Use the front panel troubleshooting menu.
D: Load vinyl media and print the internal demo.
Correct Answers: C
2.What should be used to lubricate the slider rod and/or carriage bushings on the 4XX series printers?
A: oil for teflon bushing
B: oil for brass bushing
C: molykote silicon grease
D: sewing machine oil
Correct Answers: B
3.Which statement is true regarding ink cartridges on the DesignJet 5X00?
A: They are only warranted for 30 days.
B: They are available as 700cc and 250cc.
C: They are warranted to deliver 700cc of ink.
D: They are warranted to deliver 680cc of ink and have a smart chip to track consumption.
Correct Answers: D
4.When should the preventive maintenance kit be used in the DesignJet 500/800 series?
A: whenever the customer requires it
B: when the print heads have been replaced more than 50 times
C: when the preventive maintenance message appears on the LCD
D: the DesignJet 500/800 does not need preventive maintenance
Correct Answers: C
5.When you are going to change the camera A on the DesignJet scanner series, which tools are mandatory to bring with you? Select TWO.
A:a laptop PC
B:the optical pattern
C:the SCANtest 6 CD
D:the calibration sheet
E:the focus (service) pattern
Correct Answers: B, E
6.On the DesignJet 5X00, how do you access the submenu Service Test Menu for onsite support?
A: boot up with the Up arrow and the Enter keys held down
B: go to Printer Setup>Device Setup and press the Up arrow and Enter
C: go to Printer Setup>Utilities and press the Up arrow and Enter
D: go to Printer Setup>Calibrations
Correct Answers: C
7.How do you upgrade the firmware in the DesignJet 500/800 series?
A: by replacing the SIMM
B: by using a Windows or Macintosh application
C: by replacing the electronics module
D: by replacing the HPGL/2 expansion card
Correct Answers: B
8.In the DesignJet 500/800 series, how can you view the printer information menu?
A: through the front panel for both printers
B: through the front panel for 500 series only
C: through the front panel for 800 series only
D: printer information is not available through the front panel
Correct Answers: A
9.Which statement is true regarding the front power switch on the DesignJet 5X00?
A: It provides standby.
B: It provides power isolation.
C: It provides power isolation and standby.
D: It is used to power on and power off the printer.
Correct Answers: A
10.If the main PCA or hard disk drive is replaced on the DesignJet 5X00, what do you need to do to restore the EEROM contents?
A: Nothing. The replaced component will automatically do a backup.
B: Go to the Service Utilities submenu and choose EEROM Setup.
C: Go to the Service Utilities submenu, choose Backup EEROM, and select the part that was replaced.
D: There is no restore process, you must perform all calibrations.
Correct Answers: C |
信息搜索
HP HP0-262 认证试题
- 添加日期：2006-12-13 19:57:50 来源： 点击：
A
D